• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.225-226
• /
• 2008

본 논문은 스케줄링 기반 Ad-hoc Network에서의 Relay Network Protocol에 관한 것으로, Koinonia V2.0의 MAC Layer Protocol을 기반으로 Relay Network Protocol을 설계하였다. Ad-hoc Network 기반의 Relay Network Protocol은 단일 주파수 채널을 이용한 Relay Network Protocol과 듀얼 주파수 채널을 이용한 Relay Network Protocol이 있다. 전자는 하나의 모뎀 칩을 사용하여 시스템이 단순하고 전력소모가 적은 반면, 데이터 전송 속도가 낮아지고, 후자는 데이터 전송 속도에서 손해를 보지 않는 반면, 시스템이 복잡하고 전력소모가 많은 단점이 있다. 본 연구를 통해 Ad-hoc Network 기반의 Relay Network Protocol 구현에 대한 방법론을 제시할 수 있었다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.7
• /
• pp.594-601
• /
• 2000

EIA-709.1 Control Network Protocol is the basic protocol of LonWorks systems that is emerg-ing as a fieldbus device. In this paper the protocol is implemented by using VHDL with FPGA and C program on an Intel 8051 processor. The protocol from the physical layer to the network layer of EIA-709.1 is im-plemented in a hardware level,. So it decreases the load of the CPU for implementing the protocol. We verify the commercial feasibility of the hardware through the communication test with Neuron Chip. based on EIA-709.1 protocol which is used in industrial fields. The developed protocol based on FPGA becomes one of IP can be applicable to various industrial field because it is implemented by VHDL.

• International Journal of Internet, Broadcasting and Communication
• /
• v.7 no.1
• /
• pp.30-35
• /
• 2015

The most important factor within the wireless sensor network is to have effective network usage and increase the lifetime of the individual nodes in order to operate the wireless network more efficiently. Therefore, many routing protocols have been developed. The LEACH protocol presented by Wendi Hein Zelman, especially well known as a simple and efficient clustering based routing protocol. However, because LEACH protocol in an irregular network is the total data throughput efficiency dropped, the stability of the cluster is declined. Therefore, to increase the stability of the cluster head, in this paper, it proposes a stochastic cluster head selection method for improving the LEACH protocol. To this end, it proposes a SH-LEACH (Stochastic Cluster Head Selection Method-LEACH) that it is combined to the HEED and LEACH protocol and the proposed algorithm is verified through the simulation.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.4
• /
• pp.180-188
• /
• 1997

This paper proposes a new efficient MAC(Media Access Control) protocol to establish the ultrasonic communication network for underwater vehicles, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allows fast data transmission through the multiple ultrasonic communication channel. A MAC protocol for underwater communication network that allows 'peer-to-peer' communication between a surface ship and multiple underwater systems is designed, and the proposed control protocol is implemented for its verification.

• Journal of Information Processing Systems
• /
• v.6 no.3
• /
• pp.295-306
• /
• 2010

Network lifetime is a critical issue in Wireless Sensor Networks (WSNs). In which, a large number of sensor nodes communicate together to perform a predetermined sensing task. In such networks, the network life time depends mainly on the lifetime of the sensor nodes constituting the network. Therefore, it is essential to balance the energy consumption among all sensor nodes to ensure the network connectivity. In this paper, we propose an energy-efficient data routing protocol for wireless sensor networks. Contrary to the protocol proposed in [6], that always selects the path with minimum hop count to the base station, our proposed routing protocol may choose a longer path that will provide better distribution of the energy consumption among the sensor nodes. Simulation results indicate clearly that compared to the routing protocol proposed in [6], our proposed protocol evenly distributes the energy consumption among the network nodes thus maximizing the network life time.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.4
• /
• pp.68-73
• /
• 2001

MPLS(Multi protocol Label Switching) is standard skill for added to speed and control the Network Traffic. MPLS concerned the routing protocol to relative Pack line, Each Pack composed label and node, saved the time to seek the address of node. MPLS worked IP, ATM and Network protocol of flame rely. MPLS is Network OSI suport model, 2Layer send to most of Packinsted of 3Layer Switching. MPLS is added speed Traffic of QoS and effective controled the Network.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.259-267
• /
• 2016

In Wireless Sensor Network, various routing protocols were employed by our Research and Development community to improve the energy efficiency of a network as well as to control the traffic by considering the terms, i.e. Packet delivery rate, the average end-to-end delay, network routing load, average throughput, and total energy consumption. While maintaining network connectivity for a long-term duration, it's necessary that routing protocol must perform in an efficient way. As we discussed Optimized Link State Routing protocol between all of them, we find out that this protocol performs well in the large and dense networks, but with the decrease in network size then scalability of the network decreases. Whenever a link breakage is encountered, OLSR is not able to periodically update its routing table which may create a redundancy problem. To resolve this issue in the OLSR problem of redundancy and predict link breakage, an enhanced protocol, i.e. S-OLSR (More Scalable OLSR) protocol has been proposed. At the end, a comparison among different existing protocols, i.e. DSR, AODV, OLSR with the proposed protocol, i.e. S-OLSR is drawn by using the NS-2 simulator.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.1 s.39
• /
• pp.195-201
• /
• 2006

This thesis proposes hybrid routing protocol that mix proactive routing protocol and reactive routing protocol used in Ad hoc network. Proposed method is that establish special node offering network service of nods which construct Ad hoc network and do routing different from existing hybrid routing protocol, ZRP. Special node doing these parts is called C-node. Routing using C-node can accompany efficient routing by decreasing path institution time and flooding time than existing routing protocol.

• International journal of advanced smart convergence
• /
• v.6 no.3
• /
• pp.53-58
• /
• 2017

A WSN (Wireless Sensor Network) is a network that is composed of wireless sensor nodes. There is no restriction on the place where it can be installed because it is composed wirelessly. Instead, sensor nodes have limited energy. Therefore, to use the network for a long time, energy consumption should be minimized. Several protocols have been proposed to minimize energy consumption, and the typical protocol is the LEACH protocol. The LEACH protocol is a cluster-based protocol that minimizes energy consumption by dividing the sensor field into clusters. Depending on how you organize the clusters of sensor field, network lifetimes may increase or decrease. In this paper, we will improve the network lifetime by improving the cluster head selection method in LEACH Protocol.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.1 no.1
• /
• pp.26-39
• /
• 2002

This paper describes design and implementation of home network control protocol for networked home appliances. The proposed network protocol has four-layered protocol structure and device-modem interface structure for the flexibility of modems based on power line communication. The standard message set is specified to guarantee the interoperability between various home appliances The proposed protocol can be easily implemented because it has minimum network overhead.