• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.245-245
• /
• 2005

This paper addresses the use of directional textural information for connecting road segments. In urban scene, some roads are occluded by buildings, casting shadow of buildings, trees, and cars on streets. Automatic extraction of road network from remotely sensed high resolution imagery is generally hindered by them. The results of automatic road network extraction will be incomplete. To overcome this problem, several perceptual grouping algorithms are often used based on similarity, proximity, continuation, and symmetry. Roads have directions and are connected to adjacent roads with certain angles. The directional information is used to guide road fragments connection based on roads directional inertia or characteristics of road junctions. In the primitive stage, roads are extracted with textural and direction information automatically with certain length of linearity. The primitive road fragments are connected based on the directional information to improve the road network. Experimental results show some contribution of this approach for completing road network, specifically in urban area.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.2
• /
• pp.9-16
• /
• 2022

The nodes constituting the vehicle ad hoc network (VANET) are vehicles moving along the road and road side units (RSUs) installed around the road. The vehicle ad hoc network is used to collect the status, speed, and location information of vehicles driving on the road, and to communicate with vehicles, vehicles, and RSUs. Today, as the number of vehicles continues to increase, urban roads are suffering from traffic jams, which cause various problems such as time, fuel, and the environment. In this paper, we propose a method to solve traffic congestion problems on urban roads and demonstrate that the method can be applied to solve traffic congestion problems through performance evaluation using two typical protocols of vehicle ad hoc networks, AODV and GPSR. The performance evaluation used ns-2 simulator, and the average number of traffic jams and the waiting time due to the average traffic congestion were measured. Through this, we demonstrate that the vehicle ad hoc-based traffic congestion management technique proposed in this paper can be applied to urban roads in smart cities.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.3
• /
• pp.11-18
• /
• 2015

This study is aimed to clarify the transitional characteristics of old roads and alleys lasting more than 100 years(1915-2015) in traditional urban area(Seongan-dong) of cheongju, historic inland and castle city of Korea. Cheongju castle had been completely destroyed In 1915, and urban structures been also altered last 100 years from 2015 now. Periodically, after destruction of castle, existing roads were extended and transformed to straight line for connecting with around. Expanding urban area to all directions of castle boundary in 1930-40s, town planning were created. These projects were completed in 1960-70s, the street network was built as they are. Since the 1980s, changes had been occurred in the details such as an extension of the unexecuted roads, the opening of fire lane in a block, and etc. In change and construction of roads, urban district plan in 1939 and reorganization since 1967 were planned and established with the type, location, and width of the large, medium and small roads based on data before destruction of castle. Except the width of 25m Sajikro(large3-1) and Sangdangro(large3-8,9,10), the width of 15m Namsaro(medium2-1) and Namjuro (medium2-4) as an extension of the roads, the other roads were small roads equivalent to the existing roads, and so remain intact figure of streetscape. As such, roads of east-west and north-south cross type, roads showing the outline of Cheongju castle fortress, and alleys outside the south gate are sustained in Seongan-dong of cheongju as historic urban area, and also present roads are delicately executed to the existing urban fabric.

• International Journal of Highway Engineering
• /
• v.20 no.1
• /
• pp.35-45
• /
• 2018

PURPOSES : This study examines the performance changes of road networks according to the strength of a disaster, and proposes a method for estimating the quantitative resilience according to the road-network performance changes and damage scale. This study also selected high-influence road sections, according to disasters targeting the road network, and aimed to analyze their hazard resilience from the network aspect through a scenario analysis of the damage recovery after a disaster occurred. METHODS : The analysis was conducted targeting Sejong City in South Korea. The disaster situation was set up using the TransCAD and VISSIM traffic-simulation software. First, the study analyzed how road-network damage changed the user's travel pattern and travel time, and how it affected the complete network. Secondly, the functional aspects of the road networks were analyzed using quantitative resilience. Finally, based on the road-network performance change and resilience, priority-management road sections were selected. RESULTS : According to the analysis results, when a road section has relatively low connectivity and low traffic, its effect on the complete network is insignificant. Moreover, certain road sections with relatively high importance can suffer a performance loss from major damage, for e.g., sections where bridges, tunnels, or underground roads are located, roads where no bypasses exist or they exist far from the concerned road, including entrances and exits to suburban areas. Relatively important roads have the potential to significantly degrade the network performance when a disaster occurs. Because of the high risk of delays or isolation, they may lead to secondary damage. Thus, it is necessary to manage the roads to maintain their performance. CONCLUSIONS : As a baseline study to establish measures for traffic prevention, this study considered the performance of a road network, selected high-influence road sections within the road network, and analyzed the quantitative resilience of the road network according to scenarios. The road users' passage-pattern changes were analyzed through simulation analysis using the User Equilibrium model. Based on the analysis results, the resilience in each scenario was examined and compared. Sections where a road's performance loss had a significant influence on the network were targeted. The study results were judged to become basic research data for establishing response plans to restore the original functions and performance of the destroyed and damage road networks, and for selecting maintenance priorities.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.159-171
• /
• 2010

Since rapid industrialization of Korean society, out-of-village roads have been greatly improved, while almost all of in-village roads have not been fundamentally improved yet. Unless village roads should be improved in relatively comparison with trunk roads, it has been widely recognized that grass rooted achievement of accessibility revolution not be realized. In this regard, this study tried to develop evaluation indicators system for improvement of village roads. The evaluation indicator system on village road conditions was proposed which is sub-categorized as structural improvement of road itself, its communication serviceability and public securing level of property rights of road site. The system has 6 indicators(2 of each subcategory);good pavement ratio and over 3m wide road length ratio, ratio of household fronting under 2m wide road and connectivity of road network, ratio of registered as 'road' in land category and ratio of publicly owned road sites. In the final conclusion, village roads in rural Korea have been generally in worse condition regardless of whether prior improvement works or not, except some of recent plan-based improvement villages.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.101-107
• /
• 2012

With the foot-and-mouth disease problems emerging as a serious social issue, this study set out to analyze the problems with the current setting of preventive zones against epidemics and find ways to minimize damage through preventive measures. For those purposes, the study analyzed the outbreaks of the foot-and-mouth disease and assumed that the disease would be transmitted via vehicles along the roads based on the network map of national roads and boundaries among administrative districts to conduct network analysis. The analysis results were then used to estimate spread time, whose results were then categorized according to lineal road distance and actual road distance. Then lineal moving speed and actual moving speed on the road were obtained according to the national roads and administrative districts to analyze the problems with the current method of setting preventive zones against the foot-and-mouth disease. As for spread speed around the areas where the foot-and-mouth disease broke out, the average lineal spread speed was 53.9km/day, and the average spread speed on the road was 71.1km/day, which indicates there are problems with the current method of setting preventive zones against epidemics.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.5
• /
• pp.335-341
• /
• 2018

The KDE (Kernel Density Estimation) technique in GIS (Geographic Information System) has been widely used as a method for determining whether a phenomenon occurring in space forms clusters. Most human-generated events such as traffic accidents and retail stores are distributed according to a road network. Even if events on forward and rear roads have short Euclidean distances, network distances may increase and the correlation between them may be low. Therefore, the NKDE (Network-based KDE) technique has been proposed and applied to the urban space where a road network has been developed. KDE is being studied in the field of business GIS, but there is a limit to the microscopic analysis of economic activity along a road. In this study, the NKDE technique is applied to the analysis of urban phenomena such as the density of shops rather than traffic accidents that occur on roads. The results of the NKDE technique are also compared to pedestrian networks and road centerline networks. The results show that applying NKDE to microscopic trade area analysis can yield relatively accurate results. In addition, it was found that pedestrian network data that can consider the movement of actual pedestrians are necessary for accurate trade area analysis using NKDE.

• Journal of Korea Multimedia Society
• /
• v.20 no.4
• /
• pp.649-659
• /
• 2017

Typically, a smart car is equipped with access to the Internet and a wireless local area network. Moreover, a smart car is equipped with a global positioning system (GPS) based navigation system that presents a map to a user for recommending the shortest path to a desired destination. This paper presents the design and implementation of a real-time shortest path search system for directed and dynamic roads. Herein, we attempt to simulate real-world road environments, while considering changes in the ratio of directed roads and in road conditions, such as traffic accidents and congestions. Further, we analyze the effect of the ratio of directed roads and road conditions on the communication cost between the server and vehicles and the arrival times of vehicles. In this study, we compare and analyze distance-based shortest path algorithms and driving time-based shortest path algorithms while varying the number of vehicles to search for the shortest path, road conditions, and ratio of directed roads.

• Management Science and Financial Engineering
• /
• v.12 no.2
• /
• pp.87-110
• /
• 2006

In a hierarchical road network, all roads can be classified according to their attributes such as speed limit, number of lanes, etc. By splitting the whole road network into the subnetworks of the highlevel and low-level roads, we can reduce the size of the network to be calculated at once, and find a path in the way that drivers usually adopt when searching out a travel route. To exploit the hierarchical property of road networks, we define a convenient path and propose an algorithm for finding convenient paths. We introduce a parameter indicating the driver's tolerance to the difference between the length of a convenient path and that of a shortest convenient path. From this parameter, we can determine how far we have to search for the entering and exiting gateway. We also propose some techniques for reducing the number of pairs of entries and exits to be searched in a road network. A result of the computational experiment on a real road network is given to show the efficiency of the proposed algorithm.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.307-310
• /
• 2006

In this paper, we design a prototype service in Telematics environment for providing safety warning notification at crooked roads efficiently using wireless sensor network. Through this study, we 1) analyze several requirements to be satisfied in the services, 2) design and implement the service architecture based on the requirements.