• Journal of Korea Water Resources Association
• /
• v.57 no.4
• /
• pp.277-287
• /
• 2024

Water distribution system (WDS) is exposed to various water quality incidents during its operation. This study utilized Quantitative Microbial Risk Assessment (QMRA) to analyze the risk associated with potential virus intrusion in WDSs. Additionally, the study determined the location and operation of rechlorination facilities to minimize potential risk. In addition, water quality resilience was calculated to confirm that the chlorine concentration maintains within the target range (0.1-1.0 mg/L) during normal operation. Hydraulic analysis was performed using EPANET, while EPANET-MSX was linked to simulate the reactions between viruses and chlorine. The proposed methodology was applied to the Bellingham network in the United States, where rechlorination facilities capable of injecting chlorine concentrations ranging from 0.5 mg/L to 1.0 mg/L were considered. Results indicated that without rechlorination facilities, the Average risk was 0.0154. However, installing rechlorination facilities and injecting chlorine at a concentration of 1.0 mg/L could reduce the Average risk to 39.1%. It was observed that excessive chlorine injection through rechlorination facilities reduced water quality resilience. Consequently, a rechlorination facility with a concentration of 0.5 mg/L was selected, resulting in a reduction of approximately 20% in average risk. This study provides insights for designing rechlorination facilities to enhance preparedness against potential virus ingress in the future.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.199-205
• /
• 2024

Purpose: This study aims to improve the recognition rate of Auto People Counting (APC) in accurately identifying and providing information on remaining evacuees in disaster-vulnerable facilities such as nursing homes to firefighting and other response agencies in the event of a disaster. Methods: In this study, a baseline model was established using CNN (Convolutional Neural Network) models to improve the algorithm for recognizing images of incoming and outgoing individuals through cameras installed in actual disaster-vulnerable facilities operating APC systems. Various algorithms were analyzed, and the top seven candidates were selected. The research was conducted by utilizing transfer learning models to select the optimal algorithm with the best performance. Results: Experiment results confirmed the precision and recall of Densenet201 and Resnet152v2 models, which exhibited the best performance in terms of time and accuracy. It was observed that both models demonstrated 100% accuracy for all labels, with Densenet201 model showing superior performance. Conclusion: The optimal algorithm applicable to APC among various artificial intelligence algorithms was selected. Further research on algorithm analysis and learning is required to accurately identify the incoming and outgoing individuals in disaster-vulnerable facilities in various disaster situations such as emergencies in the future.

• Journal of The Korean Association For Science Education
• /
• v.29 no.6
• /
• pp.730-740
• /
• 2009

The purpose of this study was to investigate secondary science teachers' brain activation and functional connectivity during scientific observation on the biological phenomena. Twenty six right-handed healthy science teachers volunteered to be in the present study. To investigate science teachers' brain activities during the tasks, 3.0T fMRI system with block design was used to measure BOLD signals in their brains. The SPM2 software package was applied to analyze the acquired initial image data from the fMRI system. The results have shown that the left inferior frontal gyrus, the bilateral superior parietal lobule, the left inferior parietal lobule, the left precuneus, the left superior occipital gyrus, the right middle occipital gyrus, the right precuneus, the left inferior occipital gyrus and bilateral fusiform gyrus were significantly activated during participants' scientific observation. The network model consisted of eleven nodes (ROIs) and its ten connections. These results suggested the notion that scientific observation needs a connective cooperation among several brain regions associated with observing over just a sensory receiving process.

• Journal of agricultural medicine and community health
• /
• v.49 no.2
• /
• pp.132-145
• /
• 2024

Objectives: This study compares cases of Dalgubeol Health Care Project, 301 Network Project, and 3 for 1 Project based on program logic models to derive measures for promoting integrated healthcare and welfare services centered around medical institutions. Methods: From January to December 2021, information on the implementation systems and performance of each institution was collected. Data sources included prior academic research, project reports, operational guidelines, official press releases, media articles, and written surveys from project managers. A program logic model analysis framework was applied, structuring the information based on four elements: situation, input, activity, and output. Results: All three projects aimed to address the fragmentation of health and welfare services and medical blind spots. Despite similar multidisciplinary team compositions, differences existed in specific fields, recruitment scale, and employment types. Variations in funding sources led to differences in community collaboration, support methods, and future directions. There were discrepancies in the number of beneficiaries and medical treatments, with different results observed when comparing the actual number of people to input manpower and project cost per beneficiary. Conclusions: To design an integrated health and welfare service provision system centered on medical institutions, securing a stable funding mechanism and establishing an appropriate target population and service delivery system are crucial. Additionally, installing a dedicated department within the medical institution to link activities across various sectors, rather than outsourcing, is necessary. Ensuring appropriate recruitment and stable employment systems is needed. A comprehensive provision system offering services from mild to severe cases through public-private cooperation is suggested.

• IMMUNE NETWORK
• /
• v.21 no.5
• /
• pp.33.1-33.19
• /
• 2021

IL-1β plays critical roles in the priming and effector phases of immune responses such as the differentiation, commitment, and memory formation of T cells. In this context, several reports have suggested that the IL-1β signal is crucial for CTL-mediated immune responses to viral infections and tumors. However, little is known regarding whether IL-1β acts directly on CD8⁺ T cells and what the molecular mechanisms underlying expression of IL-1 receptors (IL-1Rs) on CD8⁺ T cells and features of IL-1R⁺ CD8⁺ T cells are. Here, we provide evidence that the expression of IL-1R type I (IL-1RI), the functional receptor of IL-1β, is preferentially induced by IL-21 on TCR-stimulated CD8⁺ T cells. Further, IL-1β enhances the effector function of CD8⁺ T cells expressing IL-21-induced IL-1RI by increasing cytokine production and release of cytotoxic granules containing granzyme B. The IL-21-IL-1RI-IL-1β axis is involved in an augmented effector function through regulation of transcription factors BATF, Blimp-1, and IRF4. Moreover, this axis confers a unique effector function to CD8⁺ T cells compared to conventional type 1 cytotoxic T cells differentiated with IL-12. Chemical inhibitor and immunoprecipitation assay demonstrated that IL-21 induces a unique pattern of STAT activation with the formation of both STAT1:STAT3 and STAT3:STAT5 heterodimers, which are critical for the induction of IL-1RI on TCR-stimulated CD8⁺ T cells. Taken together, we propose that induction of a novel subset of IL-1RI-expressing CD8⁺ T cells by IL-21 may be beneficial to the protective immune response against viral infections and is therefore important to consider for vaccine design.

• Therapeutic Science for Rehabilitation
• /
• v.9 no.2
• /
• pp.99-117
• /
• 2020

Objective : The purpose of this study was to study the effects of occupation-based community rehabilitation on occupational performance skills and activities of daily living in stroke disabled persons living in the community, and to investigate the changes in occupation quality and satisfaction. Methods : In this single-subject ABA design study with follow-up evaluation, one severely disabled person diagnosed with stroke who lived in the community was recruited. The procedure consisted of a total of 25 sessions for 17 weeks. Intervention was according to occupation-based community rehabilitation, and the researcher visited the subject's home. Individualized intervention was applied according to the OTIPM. The intervention was composed of task assignment and feedback, home environment modification, information-related caregiver education, and community resource network. The evaluation of each session included the changes in the frequency of occupational performance skills, the quality of occupational performance in daily life, and the changes in occupational satisfaction, activities of daily living, quality of life, and maintenance of in the occupational performance skills during follow-up. The results were visually analyzed using a bar graph and a linear graph. Results : The results showed that the occupation-based community rehabilitation improved activities of daily living such as putting on socks, shoes slip-on, and upper body dressing garment within reach. Within the framework of the AMPS, it was confirmed that the quality of occupational performance was improved in all the subjects, and the degree of satisfaction also improved. Conclusion : This study showed that occupation-based rehabilitation can improve the occupational performance skills of stroke home disabled people positively affect the quality of occupational performance in daily life. Therefore, I think it is meaningful that useful for them.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.6
• /
• pp.327-340
• /
• 2017

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2016. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of flow, heat and mass transfer, the reduction of pollutant exhaust gas, cooling and heating, the renewable energy system and the flow around buildings. CFD schemes were used more for all research areas. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results of the long-term performance variation of the plate-type enthalpy exchange element made of paper, design optimization of an extruded-type cooling structure for reducing the weight of LED street lights, and hot plate welding of thermoplastic elastomer packing. In the area of pool boiling and condensing, the heat transfer characteristics of a finned-tube heat exchanger in a PCM (phase change material) thermal energy storage system, influence of flow boiling heat transfer on fouling phenomenon in nanofluids, and PCM at the simultaneous charging and discharging condition were studied. In the area of industrial heat exchangers, one-dimensional flow network model and porous-media model, and R245fa in a plate-shell heat exchanger were studied. (3) Various studies were published in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, subjects include mobile cold storage heat exchanger, compressor reliability, indirect refrigeration system with $CO_2$ as secondary fluid, heat pump for fuel-cell vehicle, heat recovery from hybrid drier and heat exchangers with two-port and flat tubes. In the alternative refrigeration/energy system category, subjects include membrane module for dehumidification refrigeration, desiccant-assisted low-temperature drying, regenerative evaporative cooler and ejector-assisted multi-stage evaporation. In the system control category, subjects include multi-refrigeration system control, emergency cooling of data center and variable-speed compressor control. (4) In building mechanical system research fields, fifteenth studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, renewable energies, etc. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which could be help for improving the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the analyses of indoor thermal environments controlled by portable cooler, the effects of outdoor wind pressure in airflow at high-rise buildings, window air tightness related to the filling piece shapes, stack effect in core type's office building and the development of a movable drawer-type light shelf with adjustable depth of the reflector. The subjects of building energy were worked on the energy consumption analysis in office building, the prediction of exit air temperature of horizontal geothermal heat exchanger, LS-SVM based modeling of hot water supply load for district heating system, the energy saving effect of ERV system using night purge control method and the effect of strengthened insulation level to the building heating and cooling load.

• Journal of Intelligence and Information Systems
• /
• v.21 no.4
• /
• pp.1-16
• /
• 2015

Traffic accident is one of the major cause of death worldwide for the last several decades. According to the statistics of world health organization, approximately 1.24 million deaths occurred on the world's roads in 2010. In order to reduce future traffic accident, multipronged approaches have been adopted including traffic regulations, injury-reducing technologies, driving training program and so on. Records on traffic accidents are generated and maintained for this purpose. To make these records meaningful and effective, it is necessary to analyze relationship between traffic accident and related factors including vehicle design, road design, weather, driver behavior etc. Insight derived from these analysis can be used for accident prevention approaches. Traffic accident data mining is an activity to find useful knowledges about such relationship that is not well-known and user may interested in it. Many studies about mining accident data have been reported over the past two decades. Most of studies mainly focused on predict risk of accident using accident related factors. Supervised learning methods like decision tree, logistic regression, k-nearest neighbor, neural network are used for these prediction. However, derived prediction model from these algorithms are too complex to understand for human itself because the main purpose of these algorithms are prediction, not explanation of the data. Some of studies use unsupervised clustering algorithm to dividing the data into several groups, but derived group itself is still not easy to understand for human, so it is necessary to do some additional analytic works. Rule based learning methods are adequate when we want to derive comprehensive form of knowledge about the target domain. It derives a set of if-then rules that represent relationship between the target feature with other features. Rules are fairly easy for human to understand its meaning therefore it can help provide insight and comprehensible results for human. Association rule learning methods and subgroup discovery methods are representing rule based learning methods for descriptive task. These two algorithms have been used in a wide range of area from transaction analysis, accident data analysis, detection of statistically significant patient risk groups, discovering key person in social communities and so on. We use both the association rule learning method and the subgroup discovery method to discover useful patterns from a traffic accident dataset consisting of many features including profile of driver, location of accident, types of accident, information of vehicle, violation of regulation and so on. The association rule learning method, which is one of the unsupervised learning methods, searches for frequent item sets from the data and translates them into rules. In contrast, the subgroup discovery method is a kind of supervised learning method that discovers rules of user specified concepts satisfying certain degree of generality and unusualness. Depending on what aspect of the data we are focusing our attention to, we may combine different multiple relevant features of interest to make a synthetic target feature, and give it to the rule learning algorithms. After a set of rules is derived, some postprocessing steps are taken to make the ruleset more compact and easier to understand by removing some uninteresting or redundant rules. We conducted a set of experiments of mining our traffic accident data in both unsupervised mode and supervised mode for comparison of these rule based learning algorithms. Experiments with the traffic accident data reveals that the association rule learning, in its pure unsupervised mode, can discover some hidden relationship among the features. Under supervised learning setting with combinatorial target feature, however, the subgroup discovery method finds good rules much more easily than the association rule learning method that requires a lot of efforts to tune the parameters.

• Economic and Environmental Geology
• /
• v.51 no.2
• /
• pp.185-201
• /
• 2018

Nuclear power plants(NPP) are constructed and operated to ensure safety against natural disasters and man-made disasters in all processes including site selection, site survey, design, construction, and operation. This paper will introduce a series of efforts conducted in Korea Hydro and Nuclear Power Co. Ltd., to assure the safety of nuclear power plant against earthquakes and other natural hazards. In particular, the present status of the earthquake, fault, and slope safety monitoring system for nuclear power plants is introduced. A earthquake observatory network for the NPP sites has been built up for nuclear safety and providing adequate seismic design standards for NPP sites by monitoring seismicity in and around NPPs since 1999. The Eupcheon Fault Monitoring System, composed of a strainmeter, seismometer, creepmeter, Global Positioning System, and groundwater meter, was installed to assess the safety of the Wolsung Nuclear Power Plant against earthquakes by monitoring the short- and long-term behavioral characteristics of the Eupcheon fault. Through the analysis of measured data, it was verified that the Eupcheon fault is a relatively stable fault that is not affected by earthquakes occurring around the southeastern part of the Korean peninsula. In addition, it was confirmed that the fault monitoring system could be very useful for seismic safety analysis and earthquake prediction study on the fault. K-SLOPE System for systematic slope monitoring was successfully developed for monitoring of the slope at nuclear power plants. Several kinds of monitoring devices including an inclinometer, tiltmeter, tension-wire, and precipitation gauge were installed on the NPP slope. A macro deformation analysis using terrestrial LiDAR (Light Detection And Ranging) was performed for overall slope deformation evaluation.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.37-46
• /
• 2005

Today's advertisement is dominated by visual images, which deliver messages in the most efficient and engaging way. Vivid and live images, through multimedia, attract the viewer to consume the products being advertised. In this course, the effect of 'Verfremdung' or alienation is often detected. This terminology was at first used in a epic play of Bertolt Brecht to signify a specific effect to block the empathy of the audience by reminding them of their position as the audience separate from the play. 'Verfremdung' helps them to have a sense of objectivity and critical attitude toward the performance. Multimedia commercials nowadays exhibit such a quality together with 'viewer participation:' criticism on reality: and 'speed.' In an advertisement for Shinsegi Communications' mobile system titled <017-I-Touch series, the hand transformed into a web>, the copy, 'my blood type is 'i', ' is accompanied by six unrelated fictitious scenes in which the same ocean appears as a common denominator. Because there is no connection between the scenes, free imagination of the viewer has to be involved and thus plays a significant role in making them into a context. This fact dearly exhibit some characteristics of post- modern advertisement. Momentary 'Gap' and 'Difference' between scenes contribute to 'Verfremdung' or alienation' that makes it hard for the consumers to comprehend the content on the spot. Such an uneasy situation, however, keeps the viewers thinking about the advertisement itself. While repeatedly exposed to the alienated images, the viewers come to get involved in the advertisement, trying to make the fragmented images into a coherent context. In addition, the leaps between the scenes produce a sense of 'speed' in a context, which adds more impact to the way of delivering messages using multimedia. With the help of multimedia, 'Verfremdung: which was originally intended to bring about objective and critical altitude of the audience in a play, plays a crucial role in attracting the viewer's attention and conveying a specific message in a moment in contemporary advertisement.