• Journal of Satellite, Information and Communications
• /
• v.2 no.2
• /
• pp.10-15
• /
• 2007

Small size and low profile antenna for mobile vehicular-top-mounted is needed in satellite communication services such as DBS, Satellite Internet and VSAT. In middle latitudes, the development of an array antenna which has the conformal, low profile and 45 degree beam tilted configuration, and has the high gain with sharp beamwidth, low sidelobe and low loss is required for Ku-band satellite communication. In this paper, in order to meet with these performances, an array antenna consisting of the vertical polarized waveguide longitudinal slots based on the leaky-wave mode of traveling wave antenna is proposed. An array antenna consisting of 16 leaky-wave elements is showing 30 dBi of gain, 4.9 degree of beamwidth, below than -20 dB of sidelobe level, 45 degree of beam tilt angle in center frequency. Feed network designed by waveguide cooperated feed shows good performance of wideband and low loss.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• The KIPS Transactions:PartD
• /
• v.14D no.3 s.113
• /
• pp.303-310
• /
• 2007

Information system failure is various such as program test unpreparedness, physical facilities for damage prevention unpreparedness from simple software error. Although cross is trifling the result causes vast damage. Recently, became difficult by simple outside security system to solve this problem. Now, synthetic countermove establishment and suitable confrontation connected with danger came in necessary visual point about general Information Technology of enterprise. In connection with, in this paper, various informations and system and control about data that can happen information inside and outside considering integrity for IT resource, solubility, confidentiality within organization studied about special quality to model synthetic Risk Management System that can of course and cope in danger.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.113-119
• /
• 2017

The Rich Communication Service(RCS) is a next generation mobile messaging service. Since it has been developed and managed by a wireless service provider, 3rd party application developers cannot utilize the RCS features in their apps. A few studies have been proposed to solve this problem, even though they were not viable level of deployment. This paper presents a Web-based Rich Communication Service Software Framework(WebRSF) to help the 3rd party application developers adopt RCS features easily. WebRSF converts complicated RCS protocols to simple web-based protocols for providing the RCS 1-to-1 chat service to the 3rd parties. Communication protocols between WebRSF and its clients are defined in this paper. Also, a network configuration diagram and a message flow diagram are defined. Finally, performance evaluation between the WebRSF client and the RCS client are performed to simulate the load on clients' devices. It shows that the WebRSF client has 17% less loads than the RCS client while initiating sessions, and has 25% more loads after initiating sessions.

• The KIPS Transactions:PartA
• /
• v.9A no.2
• /
• pp.147-162
• /
• 2002

Multi-processor system with fast I/O devices improves processing performance and reduces the bottleneck by I/O concentration. In the system, the Performance influenced by shared memory used for exchanging data between processors varies with configuration and utilization. This paper suggests a prediction model for buffer and shared memory optimization under interrupt recognition method using mailbox. Ethernet (IEEE 802.3) packets are used as the input of system and the amount of utilized memory is measured for different network bandwidth and burstiness. Some empirical studies show that the amount of buffer and shared memory varies with packet concentration rate as well as I/O bandwidth. And the studies also show the correlation between two memories.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.7
• /
• pp.1-11
• /
• 2002

This paper proposes that an efficient routing entry sending method between routing controller FE. based on this method, we organize IP VPN support method based on MPLS network and design MPLS-VPN service control module, MPLS-VPN processing, VPN group configuration and LSP setup processing. We evaluate the performance about the VPN based on proposed MPLS, at the result of evaluation. We figure out that based on proposed IPC method, lost packets number reduces and delay increases more slowly in case of VPN based on MPLS comparing with the VPN based on ATM which has rapid delay increasement. Therefore we confirm that the VPN based on MPLS has high speed of packet processing and high utilization of buffers through the performance evaluation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.209-218
• /
• 2017

Healthcare services can be provided through a number of independent service platforms for measurement of vital signs, diagnosis and prevention of diseases, and Information and communication technology(ICT) such as internet and mobile are converged to provide health information to users at anytime and anywhere, and it is in the center of the IoT(Internet of things). Accordingly, in this paper, we designed IoT based urination management system and evaluate the performance. A low - power Zigbee network was constructed for the configuration of the urination management system. The implemented capacitive diaper sensor was operable for the duration of 2,000 hours. We also built a database server using Raspberry Pi, a tiny embedded device, and stored the collected data to verify the data through an Android-based mobile application. The proposed urination management system can be utilized not only for the older patients, but also for the infants.

• The Korean Journal of Emergency Medical Services
• /
• v.6 no.1
• /
• pp.27-37
• /
• 2002

The health and medical service attracts more public attention as the economy of Korea is rapidly growing up and the standard of living is elevated. Especially, the interest and demand on the prehospital emergency medical service that consists of the important part of primary medical service that is directly related to the life of patients are gradually increased. However, as compared with other advanced countries such as America in this area, Korea actually fell behind in the utilization of IT (Information Technology) to maximize the efficiency of emergency service system as well as has a problem in the general service system. This study suggested the necessity to introduce EMD (Emergency Medical Dispatch) system that takes a great role as the core part in the prehospital emergency medical service that is not systemized in Korea yet. In addition, this study proposed the implementation model of EMD ASP system using ASP (Application Service Provider) in EMD system to flexibly deal with the change of IT and efficient implementation and integration of information system as well as to significantly reduce cost through wire/wireless high speed Internet network that is politically promoted in Korea on the basis of EMD. The system analysis and design was executed by HIPO (Hierarchy Plus Input Process Output) analysis that was the conceptual design technology for EMD information system modeling based on ASP and DFD (Data Flow Diagram). This study proposed DB table configuration and data schema to implement the application of web browser interface in EMD system through ERD(ER-Diagram) of EMD ASP system. Finally, this study described how to implement and utilize EMD information system. This study aims to facilitate the qualitative development of emergency medical service in the future as suggesting the concrete models for the implementation of high value-added prehospital emergency medical information system as applying ASP concept to EMD system of prehospital emergency medical service area.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.1-12
• /
• 1999

This paper illustrates and analyzes system structure, link budget and cell coverage to accommodate Korea environment about LMDS systems that are expected to play an important role as the future wireless infrastructure of the information superhighway. In the mean time, many parameters used for the analysis apply to the allocated frequency bandwidth (Up-stream : 24.25GHz-24.75GHz, Down-stream : 25.5GHz-27.5GHz) of Ministry of Information and Communication. The modem and channel coding must be developed to accommodate specifications of DAVIC protocol. The materials about atmospheric phenomena refer to apply specifications of ITU-R. This paper will be need to disign the network structure and system configuration of LMDS system.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.101-108
• /
• 2007

Parallel processing algorithms, coupled with advanced networking and distributed computing architectures, improve the overall computational performance, dependability, and versatility of a digital signal processing system In this paper, novel parallel algorithms are introduced and investigated for advanced sonar algorithm, conventional matched-field processing (CMFP). Based on a specific domain, each parallel algorithm decomposes the sequential workload in order to obtain scalable parallel speedup. Depending on the processing requirement of the algorithm, the computational performance of the parallel algorithm reveals different characteristics. The high-complexity algorithm, CMFP shows scalable parallel performance on the array of DSP processors. The impact on parallel performance due to workload balancing, communication scheme, algorithm complexity, processor speed, network performance, and testbed configuration is explored.