• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.6
• /
• pp.822-828
• /
• 2015

This paper describes computer simulation program of high-altitude electromagnetic pulse (HEMP). The HEMP is produced by the gamma rays form high-altitude nuclear explosion. The gamma rays generate a current of compton electron that leads to the production of electromagnetic fields. In case of high altitude nuclear burst, the electrical fields at the earth's surface are strong enough to be damaged for electrical and electronic device over a very much larger area. Therefore, national infrastructure will be serious damage such as power grid and communication network. In this paper introduce simulation program for calculation of HEMP and present to simulation study results of high altitude nuclear explosion experiment from U.S. and U.S.S.R.

• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.305-310
• /
• 2014

Optimal position of access point (AP) is important for multi-gigabit wireless transmission in terahertz (THz) wireless local area network (WLAN)-type applications, where there exist the THz characteristic multiple clusters in channel propagation. By considering the multiple clusters in THz indoor communications, this paper investigates the optimal AP position when two APs are issued for increasing the system capacity. Numerical results reveal that the central position of each AP within each half service region, which offers the shortest cumulated path length for line-of-sight paths, is optimal to achieve the maximal system capacity.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.246-248
• /
• 2005

The Controller Area Network (CAN) is being widely used for real-time control application and small-scale distributed computer controller systems. However, CAN may exhibit unfair behavior under heavy traffic conditions. When there are both high and low priority messages ready for transmission, the proposed precedence priority filtering method allows one low priority message to be exchanged between any two adjacent higher priority messages. In this way, the length of each transmission delays is upper bounded. These procedures are implemented as local controllers for the ISHURO (Inha Semyung Humanoid RObot).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.122-127
• /
• 2016

In this paper, new spectrum sensing schemes based on analog/RF front-end processing are introduced for IoT wireless sensor networks. While the conventional approaches for wireless channel cognition have been issued in signal processing area, the RF spectrum cognition concept makes it feasible to achieve cognitive wireless sensor networks (C-WSNs). The spectrum cognition at RF processing is categorized as four kinds of sensing mechanisms. Two recent reseaches are described as promising candidates for the C-WSN. One senses spectrum by the frequency discriminating receiver, the other senses and detects from the frequency selective super-regenerative receiver. The introduced systems with simple and low-power RF architectures play dual roles of channel sensing and demodulation. simultaneously. Therefore, introduced spectrum sensing receivers can be one of the best candidates for IoT wireless sensor devices in C-WSN environments.

• Journal of National Security and Military Science
• /
• s.9
• /
• pp.257-282
• /
• 2011

In this paper, we propose an architecture design of military operation system utilizing cellular networks. The main contribution of this paper is to provide a cost-effective military operation solution for ground forces, which is based on IT(information technology). By employing the cellular phones of officers' and non-commissioned officers' as the tools of operational communication, the proposed system can be constructed in the minimum duration and be built on the four components: command and control system, gateway, security system, and terminal(cell phone). This system is most effective for the warfare of limited area, but the effectiveness does not decrease under the total war covering the whole land of Korea. For the environmental change of near future, expanded architecture is also provided to utilize the functionalities of smart phones.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1991.04a
• /
• pp.50-55
• /
• 1991

This paper presents database technique for an computer-integrated structural design system of buildings. Network database designed to support all the processes of structural design, such as, planning, modelling, analysis, member design and redesign processes etc. stores all information from user input and system results effectively and so provides centeral communication area between applications. The user interface wi th interactive and batch modes plays roles of building modeler including conventional pre-processor and post-processor. The concepts of 'Planar Surface Modeling' and 'Geometry Zoning' are defined for easy construction of building model. The concept presented in this paper will save the time and memory required for model generation and contribute to data consistency, thus leave a designer more time actually performing the analyses and interpreting the results. The formulation of automating the process of bulilding model ins and structural analysis is the key to study.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.409-412
• /
• 2003

An inverted-F antenna for wireless local area network (WLAN) is presented. The proposed design is based on the typical dual-band planar inverted-F antennas (PIFA), which have two tunable resonant modes. The low-profile antenna is built by stamping and designed to be mounted on the metal frame of the laptop LCD panel. The obtained antenna can perform in 2.4GHz and 5GHz bands and be adopted for other wireless applications. All the measurements are performed in the actual test fixture.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1331-1332
• /
• 2015

본 논문은 CAN(Controller Area Network) 통신의 WCRT(Worst Case Response Time) 분석을 통해 IEEE1212 기반 RTU(Remote Terminal Unit)의 통신 신뢰성을 검증한다. RTU는 원격지에서 네트워크를 구성하여 각 모듈들로부터 획득한 정보를 서버로 전송하거나 원격지를 제어하는 역할을 한다. 본 논문에서 대상으로 하는 RTU의 네트워크는 물리계층과 데이터링크 계층은 CAN을 사용하고 응용계층은 IEEE1212 기반으로 통신한다. 즉, RTU를 구성하는 모듈은 각각메모리 영역을 가지고 있고, CAN ID에 메모리 주소를 포함하여 해당 영역을 쓰는 구조로 통신을 한다. 첫 번째로 이러한 응용계층을 고려하여 WCRT를 계산하는 방법을 제시하고, 두 번째로 CAN 메시지의 우선 순위를 최적화하는 방법을 고찰한다. 마지막으로 시험 환경을 구축하고 시뮬레이션을 통해 앞에서 선정한 우선순위에 따라 통신 신뢰성을 검증한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.68-70
• /
• 2013

Wireless communications based train control system which is operated with a dedicated frequency band is used only on the fixed path. Because of that, the problem arises in the area of efficiency. In this paper, a network access management technique is proposed to make the railway dedicated frequency band accessible by a normal mobile communication users efficiently and safely.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.673-676
• /
• 2002

Real time communication is very important in factory automation system using FieldBus. In this paper, we Propose the method to drive dual motors with one controller using CAN In traditional induction motor control technique, two independent Inverters are used to drive dual motors independently. In this case, two controllers are needed. Our proposed dual motors control scheme which use only one microprocessor has many advantages in the view of economic and performance compared to conventional technique.