• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.213-219
• /
• 2017

Recently, the Internet Protocol Television (IPTV) services have become very common, enabling various Internet-based services as well as watching TV. In the IPTV system, a Set-Top box (STB) plays a key role as a network terminal device that transmits and receives realtime multimedia contents. In addition, the IPTV networks are usually supported by broadband optical fiber-base network such as fiber-to-the-home (FTTH), However, a general IPTV STB is regarded as one of the local area network (LAN)-attached devices while sharing the bandwidth of the LAN (e.g., Ethernet). In order to overcome the limited bandwidth utilization by fully facilitating the broadband bandwidth (e.g., 1 Gbps) of the optical fiber-based network, we propose a new FC (Fiber Channel)-embedded IPTV STB which can be directly attached to the optical fiber network. Then, we verify that the impacts of the proposed FC-embedded IPTV STB by organizing the the FC-AL (Fiber Channel-Arbitration Loop) network equipped with the FC-embedded IPTV We measures the average Start-up Delay, Average Reject Ratio and the Number of Concurrent Users through extensive simulations to investigate the performances of the suggested FC-AL-based IPTV network. Surprisingly, the IPTV network architecture with the proposed FC-embedded IPTV STBs has an excellent average start-up delay of less than 10 msec, an acceptable average reject ratio of less than 3 % as well as a linear increase of the number of concurrent users when extending the architecture. This reveals that the proposed FC embedded STB has a superior impacts on the performance of the entire IPTV network by effectively utilizing the broadband bandwidth of the fiber optic-based network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.269-273
• /
• 2010

Massively Multiplayer Online Game (MMOG) is one of diverse applications where more than hundreds of users enjoy experiencing virtual worlds. Voronoi-based Overlay Network (VON) is proposed to reduce a bandwidth consumption in P2P MMOGs and Vorocast also is made using message forwarding in VON. We propose a dynamic area of interest (AOI) management method that solves problems such as less consistency and high latency due to sending position updates to more neighbor nodes from the message originator in forwarding scheme. Our scheme provides the higher consistency and reduces latency by combining direct connection scheme and Vorocast scheme compared to existing schemes. The proposed model is evaluated through simulations.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.243-253
• /
• 2010

Multihop data delivery in vehicular ad hoc networks (VANETs) suffers from the fact that vehicles are highly mobile and inter-vehicle links are frequently disconnected. In such networks, for efficient multihop routing of road safety information (e.g. road accident and emergency message) to the area of interest, reliable communication and fast delivery with minimum delay are mandatory. In this paper, we propose a multihop vehicle-to-infrastructure routing protocol named Vertex-Based Predictive Greedy Routing (VPGR), which predicts a sequence of valid vertices (or junctions) from a source vehicle to fixed infrastructure (or a roadside unit) in the area of interest and, then, forwards data to the fixed infrastructure through the sequence of vertices in urban environments. The well known predictive directional greedy routing mechanism is used for data forwarding phase in VPGR. The proposed VPGR leverages the geographic position, velocity, direction and acceleration of vehicles for both the calculation of a sequence of valid vertices and the predictive directional greedy routing. Simulation results show significant performance improvement compared to conventional routing protocols in terms of packet delivery ratio, end-to-end delay and routing overhead.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.5
• /
• pp.1085-1094
• /
• 2024

This paper proposes a method for estimating the detection rate of sensors by applying a pedestrian infiltration model in surveillance reconnaissance sensor networks. Under conditions where multiple sensors are installed in the sensor deployment area, the movement of infiltrating pedestrians is defined using the infiltration model allowing for the assessment of sensor detection rates when pedestrians penetrate the surveillance area. The performance analysis of the detection rate revealed a relatively high detection rate compared to the sensor coverage, and it is expected that these results will contribute to improving the efficiency of sensor deployment.

• Journal of Internet of Things and Convergence
• /
• v.10 no.2
• /
• pp.1-15
• /
• 2024

The construction of smart communities is a new method and important measure to ensure the security of residential areas. In order to solve the problem of low accuracy in face recognition caused by distorting facial features due to monitoring camera angles and other external factors, this paper proposes the following optimization strategies in designing a face recognition network: firstly, a global graph convolution module is designed to encode facial features as graph nodes, and a multi-scale feature enhancement residual module is designed to extract facial keypoint features in conjunction with the global graph convolution module. Secondly, after obtaining facial keypoints, they are constructed as a directed graph structure, and graph attention mechanisms are used to enhance the representation power of graph features. Finally, tensor computations are performed on the graph features of two faces, and the aggregated features are extracted and discriminated by a fully connected layer to determine whether the individuals' identities are the same. Through various experimental tests, the network designed in this paper achieves an AUC index of 85.65% for facial keypoint localization on the 300W public dataset and 88.92% on a self-built dataset. In terms of face recognition accuracy, the proposed network achieves an accuracy of 83.41% on the IBUG public dataset and 96.74% on a self-built dataset. Experimental results demonstrate that the network designed in this paper exhibits high detection and recognition accuracy for faces in surveillance videos.

• 대한공업교육학회지
• /
• v.44 no.1
• /
• pp.52-71
• /
• 2019

The quality of school education is a key element for national education development. An important factor that determines the quality of school education is qualities of teachers who are in responsible for school education in the field. Therefore, it is necessary to hire competent teachers in the teacher appointment exam for the secondary school. This necessity is evident especially for vocational high schools and Meister high schools with the introduction of 2015-revised curriculum based on NCS that separates each three subjects, "Electrical, Electronics Communication" resulting in the change of question mechanism, which requires new designing of assessment and content area. So, this study analyzes curriculum in college of education for "Electrical", "Electronics", "Communication", 2015-revised curriculum based on NCS and the development of standards for teacher qualifications and assessment area and evaluation of teaching ability in the subjects of the teacher appointment exam, "Electrical, Electronics Communication" Engineering" in 2009. The assessment area and content elements of "Electrical", "Electronics", "Communication are extracted from the analyzed results and they are verified by experts' consultation and presented as follows; First, the assessment area and content elements of the "Electrical" subject were designed to evaluate the NCS - based 2015 revised curriculum by presenting the NCS learning module to the evaluation area and content element in the basic subject "Electrical and Electronics Practice". Second, the section of "Electronics" presented the assessment area and content elements applying the Electronic Circuit, basic subject of the NCS and it also added "Electromagnetics", which is the basic part of Electronics in the Application of Electromagnetic waves that could be applied to the assessment. Third, the assessment area and content elements of "Communication" consist of the communication-related practice that is based on "Electrical" and "Electronic", considering the characteristics of "Communication Engineering". In particular, "Electrical and Electronics practice" which adds network construction practice and communication-related practice makes it to be able to evaluate the communication-related practical education.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1309-1318
• /
• 2004

The rapid growth of the mobile Internet has enabled its application area to expand, and its users want services that require more bandwidth for multimedia services. There are limits to support the various multimedia service to mobile station provided by existing mobile communications. The wireless MAN called the IEEE 802.16 Broadband Wireless Access systems which the IEEE 802.11 wireless LAN is similar to wireline Internet service being able to supper a various contents is used and is designed to consider a handoff is studying. Especially, TG(Task Group)e of IEEE 802.16 is in progress discussion to support a handoff to higher layer using BS(Base Station) or unit of sector, to UC. Yet a scheme is not detail. This thesis proposes the network model for IEEE 802.16e to support a soft handoff between BSs to use a mobile communication network called cdma2000 Ix EV-DO network. The proposed network model supports soft handoff to add a management skill in MA of each BS for MC(Mobility Controller). The proposed network model has merits that is able to apply existing systems as it is and that is able to use a various multimedia service, when using a wireless Internet.

• The Journal of Information Technology
• /
• v.5 no.4
• /
• pp.165-171
• /
• 2002

We propose Dynamic Circle Location Register (DCLR) scheme where each visiting location register (VLR) has a given fixed circle registration area around itself and has IDs of other VLRs in this circle area. Whenever a terminal moves to another registration area (RA), system computes whether the terminal is located in the current DCLR area and sends the recent location information of terminal to the old or new DCLR according to computing results. Also, according to change DCLR circle dynamically, we can track terminal location by querying DCLR of the current terminal when a call originates. The our scheme solves the HLR bottleneck due to the terminals frequent RA crossings and distributes the registration traffic to each of the local signaling transfer point (LSTP) area in wireless communications (WC)

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.73-78
• /
• 2016

In wireless sensor networks, sensors have capabilities of sensing and wireless communication, computing power and collect data such as sound, movement, vibration. Sensors need to communicate wirelessly to send their sensing data to other sensors or the base station and so they are vulnerable to many attacks like garbage packet injection that cannot be prevented by using traditional cryptographic mechanisms. To defend against such attacks, a behavior-based attack detection is used in which some specialized monitoring nodes overhear the communications of their neighbors(normal nodes) to detect illegitimate behaviors. It is desirable that the total sensing area of normal nodes covered by monitoring nodes is as large as possible. The previous researches have focused on selecting the monitoring nodes so as to maximize the number of normal nodes(node coverage), which does not guarantee that the area sensed by the selected normal nodes is maximized. In this study, we have developed an algorithm for selecting the monitoring nodes needed to cover the maximum sensing area. We also have compared experimentally the covered sensing areas computed by our algorithm and the node coverage algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.6
• /
• pp.620-628
• /
• 2010

Small satellites can be used for various space research and scientific or educational purposes due to advantages in small size, low-cost, and rapid development. Small Satellites have many advantages of application to Responsive Space. Compared to traditional larger satellites, however, Small satellites have many constraints due to limitations in size. Therefore, it is difficult to expect high performance. To approach maximum capability with minimal size, weight, and cost, standard modular platform of Small satellites is necessary. Modularity supports plug-and-play architecture. The result is Small satellites that can be combined quickly and reliably using plug-and-play mechanisms. For communication between modules, standard bus interface is needed. Controller Area Network(CAN) protocol is considered optimum data bus for modular Small satellite. CAN can be applied to data communication with high reliability. Hence, design optimization and simplification can also be expected. For ease of assembly and integration, modular design can be considered. This paper proposes development method for standardized modular Small satellites, and describes design of data interface based on CAN and a method of testing for modularity.