• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.653-654
• /
• 2012

Wireless sensor monitoring network has become an emerging area of research in recent year. This paper deals with the design and development of remote monitoring system using Android bluetooth protocol. The remote monitoring and measurement H/W system are implemented by ATmega128 MCU and bluetooth communication module.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.1
• /
• pp.29-34
• /
• 2007

The input and output impedances in a low voltage distribution system is one of the most important matters for power line communication because from the viewpoint of communication, the attenuation characteristic of the high frequency signals is greatly caused by impedance mismatch during sending and receiving. The frequency range is from 1MHz to 30MHz. Therefore, this paper investigates the input and output impedances in order to understand the characteristic of high frequency signals in the low voltage distribution system between a pole transformer and an end user. For power line communication, the model of Korea's low voltage distribution system is proposed in a residential area and then the low voltage distribution system is set up in a laboratory. In the low voltage distribution system, S parameters are measured by using a network analyzer. Finally, input and output impedances are calculated using S parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.57.6-57
• /
• 2001

Jitter occurring during data communication creates difficulties in integrating a system. Such problems arise from using an event triggered communication protocol such as CAN(Controller Area Network) because it cannot be determined when a specific message will be transmitted. In order to avoid this problem, several time triggered communication protocols have been developed orare under development. Those protocols include TTP(TTTech) and TTCAN(BOSCH). But a time triggered communication protocol needs more hardware than an event triggered protocol and has more complicated software algorithm because data and time information goes through the existing data line ...

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.77-80
• /
• 2005

Wireless sensor networks(WSN) technology has various applications such as surveillance and information gathering in the uncontrollable area of human. One of major issues in WSN is the research for reducing the energy consumption and reliability of data. A system with forward error correction(FEC) can provide an objective reliability while using less transmission power than a system without FEC. In this paper, we propose to use LDPC codes of various code rate(0.53, 0.81, 0.91) for FEC for WSN. Also, we considered node-to-node interference in addition to AWGN channel. The proposed system has not only high reliable data transmission at low SNR, but also reduced transmission power usage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.719-724
• /
• 2013

Visible light communication based wireless personal area network (WPAN) has recently remained in the center of attention, as it shows a lot of promise to a be a perfect replacement for the contemporary Radio frequency (RF) communication at least in the indoor environment. A commercially deployable VLC based WPAN must support diverse traffic requirement for different kinds of service. In this paper, we have proposed an innovative bandwidth allocation scheme for VLC based WPAN. We wish to allocate bandwidth adaptively for users in a network where bandwidth for each user is allocated scalably. Our aim is to allow maximum number of users in a VLC based WPAN where each user is guaranteed their required QoS. The simulation results justify that the proposed scheme is better than the conventional scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.174.2-174
• /
• 2001

Increasing demand for safety features, driving comfort and operational convenience in automobiles requires an intensive use of electronic components such as sensors, actuators and Electronic Control Unit(ECU)'s. These growing number of electronics has given rise to problems concerning the increasing number, size and weight of the wiring harnesses. In order to resolve these problems, multiplexed wiring systems such as Controller Area Network(CAN) serial communication protocol are applied in vehicle. This paper introduces the development of Body Control Module(BCM)s using multiplexed wiring systems. The BCM's were developed and implemented using CAN, the most popular choice of in-vehicle communication protocols.

• Annual Conference of KIPS
• /
• 2005.05a
• /
• pp.1307-1310
• /
• 2005

$IP^2$(IP based-IMT Network Platform)은 유비쿼터스 플랫폼으로서 백본 망에서 IP 를 IPha(IP host address)와 IPra(IP routing address)으로 두 가지를 사용하여서 이동성을 지원한다. 그리고 MN(Mobile Node)도 Active 상태와 Dormant 상태로 두 가지 상태로 나뉘는데 Dormant 상태에서 상대방이 통신을 요청하면 페이징(Paging) 과정을 통해서 Active 상태로 전이된다. 페이징을 할 때 LA(Location Area)에 속해있는 모든 셀(Cell)에 페이징 메시지를 전송하게 됨으로서 네트워크의 자원을 과도하게 사용하게 된다. 이것을 해결하기 위해서 프럭시(Proxy) 를 두는 방안을 제안하였다. 프럭시에서 MN 들이 존재하는 셀 정보를 유지 함으로서 페이징 요청이 있을 때 정확한 셀에 메시지를 전송하게 되기 때문에 네트워크 자원의 낭비를 줄일 수 있다.

• Journal of Information Processing Systems
• /
• v.9 no.3
• /
• pp.477-488
• /
• 2013

Wireless Sensor Networks (WSNs) are comprised of sensor nodes that forward data in the shape of packets inside a network. Proficient packet forwarding is a prerequisite in sensor networks since many tasks in the network, together with redundancy evaluation and localization, depend upon the methods of packet forwarding. With the motivation to develop a fault tolerant packet forwarding scheme a Self-Localized Packet Forwarding Algorithm (SLPFA) to control redundancy in WSNs is proposed in this paper. The proposed algorithm infuses the aspects of the gossip protocol for forwarding packets and the end to end performance of the proposed algorithm is evaluated for different values of node densities in the same deployment area by means of simulations.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.13-17
• /
• 2004

As the usage of wireless LAN becomes common in working environment, the number of database systems that support both wired and wireless users increases rapidly. The characteristics of wireless LAN that its speed is slow relatively comparing to wired network and the users in its environment connects to different communication points as they moves creates another challenge to be resolved in database systems. In the environment of hybrid communication systems, wired and wireless for voluminous data amount and a number of users, the two layer architecture of the conventional client-server database systems has limitation in the system performance. This is due to that server is the only point of data service in client-server database systems. In this paper, we discuss a new extended database system architecture that data services are distributed among servers and clients based on user database access patterns in order to improve system performance. We analyze the expected system performance by using simulation technique and prove the practical utilization of the system by demonstrating experimental results.

• International Journal of Internet, Broadcasting and Communication
• /
• v.6 no.1
• /
• pp.5-8
• /
• 2014

Social networking services that connect a person to other people are attracting our attention and various types of on-the-network services are provided. Library has been playing a role of social media by providing with materials such as books and magazines, and with a place for reading, studying, getting lectures, etc. In this paper, we present a method for finding candidates of groups of the library's patrons who share interest areas by utilizing the loan records, which are obtainable by every library. Such a homogeneous group can become a candidate for a study group, a community for exchange ideas, and other activity group. We apply the method to a collection of loan records of a university library, find some problem to be solved, and propose measures for more detailed solutions. Even though the potential group finding problem still remains a lot of problems to be solved, its potential importance is very high and thus to be studies even more for future applications.