• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.3
• /
• pp.95-99
• /
• 2003

In this paper, the power system automation based on CAN communication protocol is introduced. Along with digitalization of electrical device, the various on-line services such as remote control, remote monitoring, remote parameter setting, fault data recording and remote diagnostic have been realized and become available. Therefore, it is necessary for those electrical devices to have real-time and reliable communication protocols. Author proposes DNPC(Distributed Network Protocol with CAN) which is proper to the power system SCADA (Supervisory Control And Data Acquisition) and DCS (Distributed Control System). The physical and datalink layer of DNPC protocol consists of the CAN2.0B which has the real-time characteristics and powerful error control scheme. As the transport and application layer, DNP3.0 is adopted because of its flexibility and compatible feature. Using the DNPC protocol, the power system automation is realized.

• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.1283-1285
• /
• 2007

A wireless sensor network is the combination of a large number of deployed sensors over an area. Communication between the sensors is the most important factor for a successful sensor network. It is mandatory that long distance and multi-hop communication will occur between sensors. Generally sensors relay the sensed data of a particular territory to the command center via a base station. For the non uniformed deployment of sensors many sensors may deploy in hostile areas surrounded by full of obstacles or in other condition it may be out of the direct communication range of the base station. It seems a critical problem for routing data to and from those sensors to the base station. This paper proposes a route management scheme using a dynamic load balancing approach based on residual energy of each agent sensors.

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.331-335
• /
• 2005

The fusion technology of small sensor and wireless communication was followed by various application examples of the embedded system, where the social infrastructural facilities and ecological environment were wirelessly monitored. In addition, this technology represents the primary application area being extended into the healthcare field. In this study, a body area network for ubiquitous healthcare is presented. More specifically this represents a wireless biomedical signal acquisition device characterized by small size, low power consumption, pre-processing and archiving capability. Using this device, a new method for monitoring vital signs and activity is created. A PDA-based wireless sensor network enables patients to be monitored during their daily living, without any constraints. Therefore, the proposed method can be used to develop Activities of Daily Living (ADL) monitoring devices for the elderly or movement impaired people. A medical center would be able to remotely monitor the current state of elderly people and support first-aid in emergency cases. In addition, this method will reduce medical costs in society, where the average life expectancy is increasing.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.129-134
• /
• 2010

Intelligent Power Switch (IPS) is a semiconductor device which contains a logic circuit in itself. It has received significant attention as a switching component to substitute the fuse and relay components in common automobile since the internal logic provides the controllability on the loads. However, a control system for the IPS status control and a network system to share the status information of IPS are required to fully exploit the capabilities of IPS. In this paper, we propose a control circuit and algorithm using IPS. Also the communication system between the control systems and IPS components using Control Area network (CAN) are proposed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.4
• /
• pp.97-108
• /
• 2016

In this paper, we consider a cooperative monitoring network, which consists of a large number of UAVs, in order to promptly detect event in a disaster area. A command center may not be able to control each UAV individually due to resource constraints. Therefore, UAVs need to autonomously construct a mobile monitoring network in order to maximize monitoring coverage and to adapt the network formation according to environment changes in the disaster area. To that end, we propose multiple UAVs-based cooperative monitoring schemes that uses virtual forces. In this monitoring scheme, an effective monitoring is enabled by extending monitoring coverage using each UAV's circle movements. The UAVs-based monitoring network can also be splitted or merged in order to increase the monitoring effectiveness. Through simulations, we show that the proposed scheme can effectively monitor a large area and achieve a high event detection ratio.

• International journal of advanced smart convergence
• /
• v.5 no.1
• /
• pp.23-29
• /
• 2016

The information is to be considered as important part of any network, the communication nodes within network can able to communicate and transmit information by the means of configured LAN/WAN, or/and using internet technology. Thus, vast enhancement has been made in- exchanging of information over transmission media, this should be beneficial in various disciplines of modern client/server applications but at other side, several massive vulnerabilities have been directly/in-directly associated with them. To resolve the security issues, a security mechanism is proposed which hide the sensitive information of images before transmitting to networks. Random size image samples have used and encrypted to protect them from unauthorized entities. The encryption mechanism manipulates the sample images, and corresponding secret codes are generated which help to protect the images from adversaries. To provide an indestructible security mechanism, cryptography algorithms are deployed and considered as best solutions to keep the secret information of images.

• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.76-86
• /
• 2005

Today's wireless access networks consist of several tiers that overlap each other. Provisioning of real time undisrupted communication to mobile users, anywhere and anytime through these heterogeneous overlay networks, is a challenging task. We extend the end-to-end approach for the handoff management in hybrid wireless data network by designing a fully mobile-controlled handoff for mobile devices equipped with dual mode interfaces. By handoff, we mean switching the communication between interfaces connected to different subnets. This mobile-controlled handoff scheme reduces the service disruption time during both horizontal and vertical handoffs and does not require any modification in the access networks. We exploit the IP diversity created by the dual interfaces in the overlapping area by simultaneously connecting to different subnets and networks. Power saving is achieved by activating both interfaces only during the handoff period. The performance evaluation of the handoff is carried out by a simple mathematical analysis. The analysis shows that with proper network engineering, exploiting the speed of mobile node and overlapping area between subnets can reduce service disruption and power consumption during handoff significantly. We believe that with more powerful network interfaces our proposal of dual interfaces can be realized.

• Convergence Security Journal
• /
• v.8 no.3
• /
• pp.73-81
• /
• 2008

We can find easily about researches or technical development that deal with grasping the location of an object with GPS(Global Positioning System) in order to use them as a useful information. Most researches or technical development on application of tracing have been developed for the purpose of tracing objects in broad area as physical distribution or transportation, but recently, there are many researches on tracing materials in premise area as a fork lift, carts, or the equipment of work. In general, a system that utilizes location information of objects needs data communication network to transmit location data and it ensures data communication network by using common networks(SK, LG, KFT) or wireless LAN. However these two methods need monthly payment for the rental fee or require considerable amount of investment for the early stage so it is difficult to use them merely for tracing premise subjects. This study was conducted to build a tracing system for premise area by local area RF relay algorithm with low cost applying RF relay algorithm to local area wireless communication(ZIGBEE, 424MHz, Bluetooth, 900MHz) system in order to supplement these demerits and included relay algorithm, RF locating information terminal, local area RF gab-fillers, a plan for collection server of locating information, and the way of realization as they are needed in this system. I consider that this study would be applicable with flexibility in the industry area that needs tracing solution within a specific area or needs ensuring data communication network, to transmit data in ubiquitous environment, by easier and more rapid way with lower cost.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.3
• /
• pp.54-62
• /
• 2002

This paper describes a development of the integrated controller system for car electrical signal and sensor input/output control with CAN communication protocol. In order to improve the system reliability and effectiveness for the conventional controller using the wiring harness, a detailed integrated control system is introduced and discussed. The CAN communication protocol is a robust control method with serial bus system for the control of distributed module in the multiplexed network. Therefore, this has high reliability and flexibility in the overall control system implementation. This paper proposes an integrated system with high reliability and stability for control of various car signal, and evaluates the effectiveness of the system using the actual implementation. For these purposes, after a brief of the main features of the CAN will be addressed, this paper presents the result of development of the integrated hardware system and overall control program.

• International Journal of Computer Science & Network Security
• /
• v.24 no.9
• /
• pp.186-194
• /
• 2024

WebRTC (Web Real-Time Communication) is a technology that enables browser-to-browser communication. Therefore, a signalling mechanism must be negotiated to create a connection between peers. The main aim of this paper is to create and implement a WebRTC hybrid signalling mechanism named (WebNSM) for video conferencing based on the Socket.io (API) mechanism. WebNSM was designed over different topologies such as simplex, star and mesh. Therefore it offers several communications at the same time such as one-to-one (unidirectional/bidirectional), one-to-many (unidirectional) and many-to-many (bi-directional) without any downloading or installation. In this paper, WebRTC video conferencing was accomplished via LAN and WAN networks, including the evaluation of resources in WebRTC like bandwidth consumption, CPU performance, memory usage, Quality of Experience (QoE) and maximum links and RTPs calculation. This paper presents a novel signalling mechanism among different users, devices and networks to offer video conferencing using various topologies at the same time, as well as other typical features such as using the same server, determining room initiator, keeping the communication active even if the initiator or another peer leaves, etc. This scenario highlights the limitations of CPU performance, bandwidth consumption and the use of different topologies for WebRTC video conferencing.