• International Journal of Automotive Technology
• /
• v.7 no.6
• /
• pp.687-695
• /
• 2006

This paper presents a network-based traction control system(TCS), where several electric control units(ECUs) are connected by a controller area network(CAN) communication system. The control system consists of four ECUs: the electric throttle controller, the transmission controller, the engine controller and the traction controller. In order to validate the traction control algorithm of the network-based TCS and evaluate its performance, a Hardware-In-the-Loop Simulation(HILS) environment was developed. Herein we propose a new concept of the HILS environment called the network-based HILS(Net-HILS) for the development and validation of network-based control systems which include smart sensors or actuators. In this study, we report that we have designed a network-based TCS, validated its algorithm and evaluated its performance using Net-HILS.

• Journal of Information Processing Systems
• /
• v.18 no.6
• /
• pp.755-762
• /
• 2022

The existing electrical engineering design method and the dynamic objective function in the application process of automatic control system fail to meet the unbounded condition, which affects the control tracking accuracy. In order to improve the tracking control accuracy, this paper studies the electrical engineering design method based on neural network and the application of automatic control system. This paper analyzes the structure and working mechanism of electrical engineering automation control system by an automation control model with main control objectives. Following the analysis, an optimal solution of controllability design and fault-tolerant control is figured out. The automatic control power coefficient is distributed based on an ideal control effect of system. According to the distribution results, an automatic control algorithm is based on neural network for accurate control. The experimental results show that the electrical automation control method based on neural network can significantly reduce the control following error to 3.62%, improve the accuracy of the electrical automation tracking control, thus meeting the actual production needs of electrical engineering automation control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1296-1301
• /
• 2004

Fuzzy logic, neural network, fuzzy-neural network play an important as the key technology of linguistic modeling for intelligent control and decision making in complex systems. The fuzzy -neural network (FNN) learning represents one of the most effective algorithms to build such linguistic models. This paper proposes learning approach of fuzzy-neural network by immune algorithm. The proposed learning model is presented in an immune based fuzzy-neural network (FNN) form which can handle linguistic knowledge by immune algorithm. The learning algorithm of an immune based FNN is composed of two phases. The first phase used to find the initial membership functions of the fuzzy neural network model. In the second phase, a new immune algorithm based optimization is proposed for tuning of membership functions and structure of the proposed model.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.47-57
• /
• 2006

This paper presents a network-based traction control system(TCS), where several electric control units (ECUs) are connected by a controller area network(CAN) communication system. The control system consists of four ECUs: the electricthrottle controller, the transmission controller, the engine controller and the traction controller. In order to validate the traction control algorithm of the network-based TCS and evaluate its performance, a Hardware-In-the-Loop Simulation(HILS) environment was developed. Herein we propose a new concept of the HILS environment called the network-based HILS(Net-HILS) for the development and validation of network-based control systems which include smart sensors or actuators. In this study, we report that we have designed a network-based TCS, validated its algorithm and evaluated its performance using Net-HILS.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.409-412
• /
• 2007

Demand for the technology for access to device control network in industry and for access to building automation system via internet is on the increase. In such technology integration of a device control network with a data network such as internet and organizing wide-ranging DCS(distributed control system) is needed, and it can be realized in the framework of VDN(virtual device network). Specifications for device control network and data network are quite different because of the differences in application. So a router that translates the communication protocol between device control network and data network, and efficiently transmits information to destination is needed for implementation of the VDN(virtual device network). This paper proposes the concept of NCS(networked control system) based on VDN(virtual device network) and suggests the routing algorithm that uses embedded system.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.27-37
• /
• 2004

The architecture in a differentiated services (DiffServ) network is based on a simple model that applies a per-class service in the core node of the network. However, because the network behavior is simple, the network structure and provisioning is complicated. If a service provider wants dynamic provisioning or a better bandwidth guarantee, the differentiated services network must use a signaling protocol with QoS parameters or an admission control method. Unfortunately, these methods increase the complexity. To overcome the problems with complexity, we investigated scalable dynamic provisioning for admission control in DiffServ networks. We propose a new scalable $qDPM^2$ mechanism based on a centralized bandwidth broker and distributed measurement-based admission control and movable boundary bandwidth management to support heterogeneous QoS requirements in DiffServ networks.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1432-1435
• /
• 1996

This paper obtains maximum allowable delay bounds for stability of network-based control systems and presents a network scheduling method which makes the network-induced delay be less than the maximum allowable delay bound. The maximum allowable delay bounds are obtained using the Lyapunov theorem. Using the network scheduling method, the bandwidth of a network can be allocated to each node and the sampling period of each sensor and controller can be determined. The presented method can handle three kinds of data (periodic, real-time asynchronous, and non real-time asynchronous data) and guarantee real-time transmissions of real-time synchronous data and periodic data, and possible transmissions of non real-time asynchronous data. The proposed method is shown to be useful by examples in two types of network protocols such as the token control and the central control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.11
• /
• pp.963-968
• /
• 2003

A feedback control implementation for a high speed train pressurization system is proposed based on CAN (Controller Area Network). Firstly, system model including network latencies by CAN arbitration mechanisms is proposed, and an analytical compensation method of control parameters based on the system model is proposed for the network latencies. For the practical implementation of the control, global synchronization is adopted for controller to measure network latencies and to utilize them for the compensation of the control parameters. Simulation results are shown with practical tunnel data response. The proposed method is evaluated to be the most effective for the system through the control performances comparing among a controller not considering network latencies, other two off-line compensation methods, and the proposed method.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.11
• /
• pp.741-746
• /
• 2004

When investigating a control problem for network based control systems, the main issue is network-induced delay. This delay can degrade the performance of control systems designed without considering the delay and even destabilize the system. In this paper, we consider the stabilization of network based control systems, where there is bounded time-varying delay. This delay is treated like parameter variation of a discrete time system. The state feedback controller design is formulated as linear matrix inequality. Finally, we show that the stability of control systems designed with considering the delay is superior to that is not so.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.78-101
• /
• 2017

High-quality industrial control is critical to ensuring production quality, reducing production costs, improving management levels and stabilizing equipment and long-term operations. WiFi-based Long Distance (WiLD) networks have been used as remote industrial control networks. Real-time performance is essential to industrial control. However, the original mechanism of WiLD networks does not minimize end-to-end delay and restricts improvement of real-time performance. In this paper, we propose two algorithms to obtain the transmitting/receiving phase cycle length for each node such that real time constraints can be satisfied and phase switching overhead can be minimized. The first algorithm is based on the branch and bound method, which identifies an optimal solution. The second is a fast heuristic algorithm. The experimental results show that the execution time of the algorithm based on branch and bound is less than that of the heuristic algorithm when the network is complex and that the performance of the heuristic algorithm is close to the optimal solution.