• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.74-85
• /
• 2015

PCI Express is a well-known and widely used de-facto system bus standard for connecting among a processor and IO devices. PCI Express is originated from old PCI standard, and its most of applications are limited to be used within a PC or server system. But, because of its fast speed, low power consumption, and good protocol efficiency, it is considered as one of a good candidate for an alternate system interconnect for many years. In this paper, we present design, implementation and early evaluation of an alternate system interconnect by utilizing PCI Express. The developed alternate system interconnect using PCI Express (named PCIeLINK) utilizes non-transparent bridging (NTB) technic which generally used in fail-over system in PCI and PCI Express. By using NTB technic, PCI Express device can be extended to outside of a system without electrical and logical problems arising during system boot and enumeration. To build up an alternate system interconnect, we designed and implemented a network interface card having multiple PCI Express ${\times}4$ connections (theoretically 20 Gbps) and tested, The early test results revealed that an ${\times}4$ port in the card showed 8.6 Gbps peak performance for bulk transmission and 5.1 Gbps peak for normal TCP/IP transfer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.63-68
• /
• 2017

Although automated metro subway systems have the advantage of operating a train without a train driver, it is difficult to detect an immediate fault condition and take countermeasures when an unusual situation occurs. Therefore, it is important to construct a maintenance information system (MIS) that detects the vehicle failure/status information in real time and maintains it efficiently in the depot of the railway's vehicles. This paper proposes a conceptual design method that realizes the interface between the train control system (TCS), the operation control center train control monitoring system (OCC-TCMS) console, and the MIS using wireless communication network in real-time. To transmit a large amount of information on 800,000 occurrences per day during operation, data was collected in a 56 byte data table using a data processing algorithm. This state information was classified into 4 hexadecimal codes and transmitted to the MIS by mapping the status and the fault information on the vehicle during the main line operation. Furthermore, the transmission and reception data were examined in real time between the TCS and MIS, and the implementation of the failure information screen was then displayed.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.740-753
• /
• 2010

Performance of TCP can be severely degraded in WLP-based Mobile IP wireless networks where packet loss not related to network congestion occurs frequently during WLP-based inter-subnetwork handoff by user mobility. To resolve such a problem in the networks using WLP-based Mobile IP, the packet buffering method recovering seamlessly the packets dropped due to user mobility has been proposed. The packet buffering method at a bridge station recovers those packets dropped during handoff by forwarding buffered packets at the old bridge station to the WLP device. But, when the WLP device moves to a congested bridge station in a new WLP foreign subnetwork, those buffered packets forwarded by the old bridge station are dropped and TCP transmission performance of a WLP device in the congested bridge station degrades due to increased congestion by those forwarded burst packets. In this paper, a PBM(Packet Bridge Marker) is proposed for preventing buffered out-of-profile(OUT) packets from reducing the throughput of in-profile(IN) packets of an Assured Service WLP device. From this operation, the packet losses of buffered OUT packets are avoided and the throughput of IN and Total packets of an AS WLP device are increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1922-1931
• /
• 1999

A multicast traffic’s feature is the function of providing a point to multipoints cell transmission, which is emerging from the main function of ATM switch. However, when a conventional point-to-point switch executes a multicast function, the excess load is occurred because unicast cell as well as multicast cell passed the copy network. Additionally, due to the excess load, multicast cells collide with other cells in a switch. Thus a deadlock that losses cells raises, extremely diminishes the performance of switch. An input queued switch also has a defect of the HOL (Head of Line) blocking that less lessens the performance of the switch. In the proposed multicast switch, we use shared memory switch to reduce HOL blocking and deadlock. In order to decrease switch’s complexity and cell's processing time, to improve a throughput, we utilize the method that routes a cell on a separated paths by traffic pattern and the scheduling algorithm that processes a maximum 2N cell at once in the control part. Besides, when cells is congested at an output port, a cell loss probability increases. Thus we use the Output Memory (OM) to reduce the cell loss probability. And we make use of the method that stores the assigned memory (UM, MM) with a cell by a traffic pattern and clears the cell of the Output memory after a fixed saving time to improve the memory utilization rate. The performance of the proposed switch is executed and compared with the conventional policy under the burst traffic condition through both the analysis based on Markov chain and simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1138-1147
• /
• 2012

In this paper, an efficient power control based MF-TDMA resource allocation scheme is proposed for next generation military satellite communication systems. The proposed scheme has the flexibility is used to support heterogeneous terminals with differ in transmission capabilities. The method can be divided into two parts : burst size calculation and burst structure determination. At first, we estimate the link budget taken into account a dynamic satellite link state variation. Then, applicable ACM level and burst size is chosen. In burst structure determination phase, we reorganize the burst structure in time-frequency domain by controlling limited power, bandwidth, time resources. In particular, we compensate the power spectral density among different terminals to integrate them in same transponder, Furthermore, we increase the packing efficiency by controlling the ACM level of the burst in applicable power spectral density range. Simulation results show that the method increase the spectral efficiency and burst packing efficiency. In addition, slot allocation rejection ratio is successfully reduced.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1091-1101
• /
• 2012

Device-to-device (D2D) communication is expected to offer local area services with low transmit power and short link distance, even not via any infrastructures. These advantages will lead to the deployment of D2D systems in a massive scale, where the order of magnitude of D2D user density is higher than that of cellular user density. Network-assisted D2D systems, where D2D resources are managed by cellular networks, are unable to support the large number of D2D devices, due to the signaling overhead for control signals. In this case, no coordination can be an answer. This paper considers uncoordinated D2D systems, which is implemented with a number of D2D devices in a large scale. By analyzing the transmission capacity of D2D systems, we found a feasibility condition under which the uncoordinated D2D communications possibly coexist within cellular networks, sharing the uplink spectrum. In addition, we provide guidelines for the operational points of massive D2D communications, giving some knowledge about proper transmit power level and link distance of uncoordinated D2D.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.377-382
• /
• 2007

In this study, we report the synthesis of the single-walled carbon nanotubes(SWCNTs) using laminated catalyst(Al/Fe/Al) layer deposited by sputter on Si(001). SWCNTs are grown by thermal chemical vapor deposition (TCVD) method. As the results of scanning electron microscopy(SEM), high resolution transmission electron microscopy(HR-TEM) and Raman spectroscopy, we confirmed the SWCNTs bundles with narrow diameter distribution of $1.14{\sim}1.32\;nm$ and average G&D ratio of 22.76. Compare to the sample having Fe/Al catalyst layer, it can be proposed that the top-aluminum incorporated with iron catalyst plays an important role in growing process of CNTs as a agglomeration barrier of the Fe catalyst. Thus, we suggest that a proper quantity of aluminium metal incorporated in Fe catalyst induce small and uniform iron catalysts causing SWCNTs with narrow diameter distribution.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.1
• /
• pp.100-108
• /
• 2003

By choosing Multicast for transmission of educational contents in the Remote Educational System, we can reduce the server load and increase network bandwidth utilization. We design and implement Multicast Middleware for the Remote Educational System in this paper. There are three characteristics in this Multicast Middleware: 1) Through Centralized Multicast Group Management for passive members, it allows a host to make multicast group, which is composed of receivers, called Group Member and who are chosen by the host, called group Maker. Because, all groups are created by the Group Maker in Centralized Group Management, Group Member's join action will be passive 2) Maintenance and recovery of multicast group information in order to restore from exception and crash; the maintenance and recovery mechanism of Group Maker is distinct from that of Group Member. 3) The mechanism which enables to transmit large size multimedia data through multicasting and remove additional copy operation through shared buffer. Fragmentation/de-fragmentation for large data delivery results in additional copy operation in user level. But by using user level shared buffer, it can be done without user Bevel copy operation. By applying to Remote Educational environment which consists of 30 PCs and Fast Ethernet, we can examine the efficiency of this middleware, which can transmit 18frames/sec movie which resolution 320 $\times$ 120 pixels, 128Kbps encoded sound data and some text data.

• Journal of KIISE:Databases
• /
• v.34 no.5
• /
• pp.448-464
• /
• 2007

Location-Based Services (LBSs) provide results to queries according to the location of the client issuing the query. In LBS, techniques such as caching and prefetching are effective approaches to reducing the data transmission from a server and query response time. However, they can lead to cache inefficiency and network overload due to the client's mobility and query pattern. To solve these drawbacks, we propose a semantic prefetching (SP) scheme using prefetching segment concept and improved cache replacement policies. When a mobile client enters a new service area, called semantic prefetching area, proposed scheme fetches the necessary semantic information from the server in advance. The mobile client maintains the information in its own cache for query processing of location-dependent data (LDD) in mobile computing environment. The performance of the proposed scheme is investigated in relation to various environmental variables, such as the mobility and query pattern of user, the distributions of LDDs and applied cache replacement strategies. Simulation results show that the proposed scheme is more efficient than the well-known existing scheme for range query and nearest neighbor query. In addition, applying the two queries dynamically to query processing improves the performance of the proposed scheme.