• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.579-593
• /
• 2010

Low-power radio frequency (RF) chip transceiver technology and the associated structural health monitoring platforms have matured recently to enable high-rate, lossless transmission of measurement data across large-scale sensor networks. The intrinsic value of these advanced capabilities is the allowance for high-quality, rapid operational modal analysis of in-service structures using distributed accelerometers to experimentally characterize the dynamic response. From the analysis afforded through these dynamic data sets, structural identification techniques can then be utilized to develop a well calibrated finite element (FE) model of the structure for baseline development, extended analytical structural evaluation, and load response assessment. This paper presents a case study in which operational modal analysis is performed on a three-span prestressed reinforced concrete bridge using a wireless sensor network. The low-power wireless platform deployed supported a high-rate, lossless transmission protocol enabling real-time remote acquisition of the vibration response as recorded by twenty-nine accelerometers at a 256 Sps sampling rate. Several instrumentation layouts were utilized to assess the global multi-span response using a stationary sensor array as well as the spatially refined response of a single span using roving sensors and reference-based techniques. Subsequent structural identification using FE modeling and iterative updating through comparison with the experimental analysis is then documented to demonstrate the inherent value in dynamic response measurement across structural systems using high-rate wireless sensor networks.

• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.61-68
• /
• 2015

Mobile ad hoc networks (MANETs) are self-organized dynamic networks populated by mobile nodes. This paper presents the improved cross-layer approach to complement the recent works for video transmission services on MANET. We use a statistical design of experiment and analysis in order to investigate interactions between major factors of each layer effectively with minimizing ns-3 simulation run time. The proposed cross-layer approach considers MANET protocol layers (i.e., physical, network and transmission layers) and an application layer (i.e., a video encoder) as factors simultaneously. In addition, the approach defines an objective video quality metric as a response variable. The result of this paper can be applicable as a preliminary research to design an optimized video transmission application which has ability to adjust controllable factors to dynamic uncontrollable factors.

• Journal of KIBIM
• /
• v.11 no.3
• /
• pp.45-54
• /
• 2021

The augmented reality (AR) has recently became an attractive technology in construction industry, which can play a critical role in realizing smart construction concepts. The AR has a great potential to help construction workers access digitalized information about design and construction more flexibly and efficiently. Though several AR applications have been introduced for on-site made to enhance on-site and off-site tasks, few are utilized in actual construction fields. This paper proposes a new AR framework that provides on-site managers with an opportunity to easily access the information about construction resources such as workers and equipment. The framework records videos with the camera installed on a wearable AR device and streams the video in a server equipped with high-performance processors, which runs an object detection algorithm on the streamed video in real time. The detection results are sent back to the AR device so that menu buttons are visualized on the detected objects in the user's view. A user is allowed to access the information about a worker or equipment appeared in one's view, by touching the menu button visualized on the resource. This paper details implementing parts of the framework, which requires the data transmission between the AR device and the server. It also discusses thoroughly about accompanied issues and the feasibility of the proposed framework.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1263-1268
• /
• 2018

In this paper, a video analysis is proposed to implement video surveillance system with deep learning object detection and probabilistic data association filter for tracking multiple objects, and suggests its implementation using GPU. The proposed video analysis technique involves object detection and object tracking sequentially. The deep learning network architecture uses ResNet for object detection and applies probabilistic data association filter for multiple objects tracking. The proposed video analysis technique can be used to detect intruders illegally trespassing any restricted area or to count the number of people entering a specified area. As a results of simulations and experiments, 48 channels of videos can be analyzed at a speed of about 27 fps and real-time video analysis is possible through RTSP protocol.

• Journal of Digital Convergence
• /
• v.17 no.1
• /
• pp.195-201
• /
• 2019

This paper proposes a blockchain system to share Wireless Local Area Network (WLAN) that recently suffers from mutual interference among increasing devices using unlicensed bands. Blockchain technology can induce cooperation from users by incentivizing them with cryptocurrency like shown in Bitcoin example. In this paper, we describe Blockchain based access mechanism in WLAN instead of conventional authentication based access. Here, users can access any WLAN access point by paying through smart contract while they also receive payment from others. In order to support real-time transaction, we apply proof-of-authority that is realized by Byzantine fault tolerant protocol instead of well-known proof-of-work that requires huge computing power and delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1353-1358
• /
• 2021

IoT (Internet of Things) emerges from various technologies such as communications, micro processors and embedded system and so on. The IoT has also been used to UAV (Unmanned Aerial Vehicle) system. In manned aircraft, a pilot and co-pilot should control FCS (Flight Control System) with FBW(Fly By Wire) system for flight operation. In contrast, the flight operation in UAV system is remotely and fully managed by GCS (Ground Control System) almost in real time. To make it possible the communication channel should be necessary between the UAV and the GCS. There are many protocols between two systems. Amongst them, MAVLink (Macro Air Vehicle Link) protocol is representatively used due to its open architecture. MAVLink does not define any securities itself, which results in high vulnerability from external attacks. This paper proposes the method to enhance data security in GCS network by applying cryptographic methods to the MAVLink messages in order to support safe UAV operations.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.3
• /
• pp.547-554
• /
• 2022

Recently, the field of telemedicine is growing rapidly due to the COVID-19 pandemic. However, the cost of telemedicine services is relatively high, since cloud computing, video conferencing, and cyber security should be considered. Therefore, in this paper, we design and implement a cost-effective P2P-based telemedicine system. It is implemented using the widely used the open source computing platform, Raspberry Pi, and P2P network that frees users from security problems such as the privacy leakage by the central server and DDoS attacks resulting from the server/client architecture and enables trustworthy identifying connection system using SSL protocol. Also it enables users to check the other party's status including body temperature in real time by installing a thermal imaging camera using Raspberry Pi. This allows several medical diagnoses that requires visual aids. The proposed telemedicine system will popularize telemedicine service and meet the ever-increasing demand for telemedicine.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.6
• /
• pp.1247-1260
• /
• 2021

For more efficient energy management of nodes in wireless sensor networks, research has been conducted on mobile sink nodes that deliver data from sensor nodes to server recently. UAV (Unmanned Aerial vehicle) is used as a representative mobile sink node. Also, most studies on UAV propose algorithms for calculating optimal paths and have produced rapid advances in the IoD (Internet of Drones) environment. At the same time, some papers proposed mutual authentication and secure key exchange considering nature of the IoD, which requires efficient creation of multiple nodes and session keys in security perspective. However, most papers that proposed secure communication in mobile sink nodes did not protect end-to-end data privacy. Therefore, in this paper, we propose integrated security model that authentication between mobile sink nodes and sensor nodes to securely relay sensor data to base stations. Also, we show informal security analysis that our scheme is secure from various known attacks. Finally, we compare communication overhead with other key exchange schemes previously proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.475-478
• /
• 2011

driver for safety always check the status of their vehicle, and it is essential to understand. But if you want to know the status of the driver of the vehicle in specialist referral time and money because it costs the operator shall be paid. Today's rapidly changing IT technology with the development of the various features of your phone to check the status of the vehicle was able to do. However, the car's existing phone system, car diagnostic expertise must be learned because it will reveal the status of the vehicle do not have the expertise to not highlight the need for diagnostic. To reflect these points in smartphone users to easily use their own vehicles at a time to determine the status of a system that is required. In this paper, OBD-II protocol conversion WiFi OBD-II connector, retrieving information from the driver of the vehicle replacement cycle of consumables required vehicle inspection, vehicle problems in real-time diagnostic information to the user ease of use shows the IOS implementation in the automotive supply was implemented based on the smartphone.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.514-520
• /
• 2018

Presence service provides various information about users such as locations, status of on/offline and network access methods, and number of presence resources required by each users increases largely in mobile environment. Therefore an effective method which can reduce load of presence servers is needed. In this paper, a large scale distributed presence service system which can distribute effectively total presence system load of presence servers using message control session has been presented. This large scale distributed presence service system provides various presence information for massive volumes of users. In this study, a new message control session architecture which can dynamically distribute loads of the presence servers to multiple servers has been presented, and a new presence information data architecture for controlling load of the presence servers has been designed. In this architecture, each presence server can exchange current load level in real time to get variance of the total system load change according to user numbers, and can distribute system load to maintain load level of each server evenly. The performance of the proposed large scale distributed presence service system has been analysed by experiments. The results has been showed that average presence resource subscription processing time reduced from 42.6% to 73.6%, and average presence notification processing time reduced from 37.6% to 64.8%.