• ETRI Journal
• /
• v.24 no.2
• /
• pp.69-81
• /
• 2002

This paper reviews the existing research activities on signaling and control procedures for IP over optical networks. We focus on the IP-centric signaling and control architecture based on the generalized multi-protocol label switching (GMPLS) protocol and analyze various scenarios and technical issues for deploying the IP over an optical network. We analyze the signaling and operations and administration and maintenance requirements for integrating an IP network and an optical network in order to cope with the high bandwidth and poor resource granularity of the optical network, including the optical cross-connect system. On the basis of network architecture and a reference configuration model, we investigate the GMPLS-based control architecture and interconnection model appropriate for controlling IP bandwidth and optical lambda resources. The signaling and control procedure based on GMPLS on optical user-network interface and network-network interface are comparatively investigated to provide the optical lightpath. We also study protection and restoration procedures to protect link failure when it applies to generalized MPLS signaling.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1377-1386
• /
• 2000

As all delays resulting from the signaling network directly affect the response time of network management activity, all control informations have to be transported most efficiently. It is very important to know the performance of the signaling system not only because of smooth network operation but also because of efficient engineering of signaling networks. In this paper, we analyzed mean queueing delay of signaling link for ISUP signaling messages in common channel signaling system by using M[X]/G/1 and M[X]/D/1 batch arrival queueing system. This is because we modeled arrival process of the signaling messages as batch arrival process considering that many kinds of signaling messages are generated at short intervals when a call requests a connection. Analysis was carried out considering different call processing scenario based on ITU-T specification. We also described the numerical results from the different types of queueing models.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.187-188
• /
• 2006

In CDMA based mobile communication network, signaling messages are routed through Signaling Transfer Point(STP) which is responsible for MTP layer 3 switching. As WCDMA based UMTS network is considered as next generation technology allowing global roaming services, all nodes in networks have their own identity number called Global Title(GT). Therefore, it is essential to introduce Signaling Gateway(SG) responsible for SCCP layer switching to solve the problem each node has all GT tables including even all overseas nodes. In this paper, we propose the signaling network architecture in UMTS networks using SG and we show that we can reduce CAPEX and OPEX in each node. To show the validity of the proposed method some simulations are given in which the results can be expected by intuitive observation.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.47-54
• /
• 2013

In this paper, the structural design of optical Internet is analyzed and by using UNI (User Network Interface) signaling protocol an optical transmission experiment was performed. The hierarchical structure of the basic optical Internet consists of the backbone network, the service network and the access network. The necessary functions for each layer were described as follows: Control structure of the optical transport layer, network operation and management structure, internetworking technology of sub networks, routing and signaling technology. By using UNI signaling protocol from OIF (Optical Internetworking Forum), the optical transmission in the proposed structure of the optical Internet network was experimented. By the traffic generation of LSP (Label Switched Path) data packets along the route-configuration was delivered to UNI. Finally, by showing the value of TCP (Transmission Control Protocol) packets the optical transmission was completely and successfully demonstrated.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.39-51
• /
• 1998

In this paper, we propose signaling procedures amon network elements for a connection rerouting method which can reduce inter-switch handoff processing delay reduces the delay in the connection re-routing by reserving VPI/VCIs for possible inter-switch handoff calls in advance. Additionally, we mathematically analyze the signaling procedures and then suggest solutions to the relations with cluser size, network topoloty, handoff-request rete and handoff delay. With simulation, the solutions are validated. From numerical examples, we concluded taht handoff delay, one of the handoff QoSs, can be satisfied by adjusting the cluster size and network topology according to the handoff -request rate of service area. With our proposed signaling and analytic methods, we concluded that the connection rerouting method using cluster-sectoring effectively reduces the delay of inter-switch handoff processing than dynamic connection rerouting method. Our solutions are useful in guaranteeing the requested handoff delay (especially, inter-switch handoff delay) when the connection rerouting method is applied to ATM-based wireless/wired integrated network.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.3
• /
• pp.1-11
• /
• 1997

Since the radio spectrum is limited, future wireless system will have micro cellular architecture in order to provide multimedia traffic services on personal communicatons network. The small coverage area of micro cellular systems results in frequent hadnoffs and location updates. We focuse on network load and terminal power due to frequent location updates and propose a location tracking scheme using embedded-pager PCS terminals. The proposed scheme is expected to minimize theconsumption of PCS terminal powr and improve the receiving rate of callee because of the power saving mechanism and the embedded-pager PCS terminal. This paper proposes signaling flows among the network elements for the proposed location tracking scheme. The signaling flows are accomodated to not only the existed network architectures but alsothe ATM backbone network arcitecture. To verify the signaling flows, we used petri-Net model. The resutls show that the signaling flows are suitable to our proposed location tracking scheme.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.65-80
• /
• 2012

Mobile IP is a simple and scalable global mobility solution. However, it may cause excessive signaling traffic and long signaling delay. So MN (Mobile Node) to the home network in order to reduce the number of location update signaling is necessary to reduce the delay. In this paper, the signaling overhead to be distributed evenly on the boundary of the regional network, each MN's dynamic mobility and traffic load is adjusted according to the PMIPv6 (Proxy Mobile IPv6) networks in the proposed dynamic regional mobility management scheme (dMMS). Each user in a distributed network system that offers the least amount of signaling traffic is tailored to the optimized system configuration. Signaling cost function in order to propose a new discrete analytical model is proposed, MN's mobility and packet arrival patterns. Location update and packet delivery costs to calculate the total average, the optimized area to determine the size of the network is proposed. The results of mathematical analysis, the proposed technique dMMS in terms of reducing the cost of the entire signaling were found to be excellent performance.

• Herbal Formula Science
• /
• v.30 no.3
• /
• pp.175-182
• /
• 2022

Objective : This study aims to investigate the active ingredients and potential mechanisms of the beneficial herb on human cancers such as the liver by employing network pharmacology. Methods : Ingredients and their target information was obtained from various databases such as TM-MC, TTD, and Drugbank. Related protein for liver cancer was retrieved from the Comparative Toxicogenomics Database and literature. A hypergeometric test and gene set enrichment analysis were conducted to evaluate associations between protein targets of red ginseng (Panax ginseng C. A. Meyer) and liver cancer-related proteins and identify related signaling pathways, respectively. Network proximity was employed to identify active ingredients of red ginseng on liver cancer. Results : A compound-target network of red ginseng was constructed, which consisted of 363 edges between 53 ingredients and 121 protein targets. MAPK signaling pathway, PI3K-Akt signaling pathway, p53 signaling pathway, TGF-beta signaling pathway, and cell cycle pathway was significantly associated with protein targets of red ginseng. Network proximity results indicated that Ginsenoside Rg1, Acetic Acid, Ginsenoside Rh2, 20(R)-Ginsenoside Rg3, Notoginsenoside R1, Ginsenoside Rk1, 2-Methylfuran, Hexanal, Ginsenoside Rd, Ginsenoside Rh1 could be active ingredients of red ginseng against liver cancer. Conclusion : This study suggests that network-based approaches could be useful to explore potential mechanisms and active ingredients of red ginseng for liver cancer.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.275-279
• /
• 2005

In this paper, we analyses of a traffic for authentication signaling in third generation mobile sensor network. In universal mobile telecommunication system, authentication functions are utilized to identify and authentication a mobile station and validate the service request network services. The authenticating parties are the authentication the serving general packet radio service support node access the authentication center to obtain the authentication with the mobile station. In this paper, we propose that the automatic cost-effective solution size of the authentication vector array.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.205-207
• /
• 2008

Much signaling equipments are installed along railway tracks, and these are working in cooperation with each other, referring to other signaling equipment status. Existing railway signaling system uses signal cables to transmit this information. This system requires high cost for construction and have the problems like many faults from mistakes in cable connection, etc To solve these problems, JREast Inc. has developed a new signaling system based on network technology, utilizing Ethernet-Passive Optical Network(E-PON). In this paper, we review the system proposed by JREast Inc. and field test results performed on railway.