• 제목/요약/키워드: Network Latency

검색결과 764건 처리시간 0.021초

Mobile WiMAX에서 Proxy 기반의 고속 핸드오버 방안 (A Proxy-Based Fast Handover Scheme in Mobile WiMAX Networks)

  • 이화섭;김복기;민상원
    • 한국ITS학회 논문지
    • /
    • 제8권4호
    • /
    • pp.65-72
    • /
    • 2009
  • 본 논문에서는 mobile WiMAX 네트워크에서 PMIPV6를 이용하여 네트워크-계층 이동성을 제공하는 경우, 핸드오버 성능 향상을 위한 proxy 기반의 고속 핸드오버를 제안하였다. 이를 위해 3개의 링크-계층 메시지와 1개의 네트워크-계층 메시지를 새롭게 정의하였으며, 이를 이용하여 링크 핸드오버 수행시 미리 바인딩 절차를 수행함으로써 핸드오버 지연시간을 줄이고, 패킷 손실과 패킷 순서 어긋남 문제를 고려한 버퍼링 메커니즘을 제안하였다. 그리고 성능 분석을 통해 제안한 방식이 PMPV6와 비교하여 더 우수한 성능을 나타냄을 확인하였다.

  • PDF

고속 라우터에 대한 고찰(II)-STC104의 망 구성에 따른 성능분석 (Study on High Speed Routers(II)-Performance Analysis on Various Network Topology of STC104)

  • 이효종
    • 정보처리학회논문지A
    • /
    • 제8A권2호
    • /
    • pp.157-166
    • /
    • 2001
  • A simulation package has been developed as an event-driven system that can handle the hardware configuration of STC104 and algorithm proposed in the sister paper of ‘Study on High Speed Routers(II).’After various STC104 topology of meshes, torus, and hypercubes are constructed using up to 512 switches, the performance of each topology has been analyzed under different message generation rate in terms of throughputs, latency, and packet blocking time. Modified multicast algorithms for STC104 have been proposed for STC104 after U-mesh and U-torus in order to overcome the multicasting difficulty because of the point-to-point communication method found in STC104. The performance of the multicast algorithms have been analyzed over meshes and torus configuration. Throughput gets higher in the order of mesh, torus, and hypercube. Throughput difference among topology were distinctive in the zone of high message generation rate. Latency and blocking time increased in the order of hypercube, torus, and mesh. U-mesh and U-torus of software multicast showed similar throughput, however, U-mesh peformed slightly better result. These algorithms showed eight to ten times better results compared to individual message pass for 90 destination nodes. Multi-link environment also showed better performance than single-link environment because multi-link network used the extra links for communication.

  • PDF

Performance Oriented Docket-NoC (Dt-NoC) Scheme for Fast Communication in NoC

  • Vijayaraj, M.;Balamurugan, K.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권3호
    • /
    • pp.359-366
    • /
    • 2016
  • Today's multi-core technology rapidly increases with more and more Intellectual Property cores on a single chip. Network-on-Chip (NoC) is an emerging communication network design for SoC. For efficient on-chip communication, routing algorithms plays an important role. This paper proposes a novel multicast routing technique entitled as Docket NoC (Dt-NoC), which eliminates the need of routing tables for faster communication. This technique reduces the latency and computing power of NoC. This work uses a CURVE restriction based algorithm to restrict few CURVES during the communication between source and destination and it prevents the network from deadlock and livelock. Performance evaluation is done by utilizing cycle accurate RTL simulator and by Cadence TSMC 18 nm technology. Experimental results show that the Dt-NoC architecture consumes power approximately 33.75% 27.65% and 24.85% less than Baseline XY, EnA, OEnA architectures respectively. Dt-NoC performs good as compared to other routing algorithms such as baseline XY, EnA, OEnA distributed architecture in terms of latency, power and throughput.

A Novel Optical High-Availability Seamless Redundancy (OHSR) Design Based on Beam Splitting / Combining Techniques

  • Altaha, Ibraheem Raed;Kim, Sung Chul;Rhee, Jong Myung
    • Journal of the Optical Society of Korea
    • /
    • 제20권6호
    • /
    • pp.678-685
    • /
    • 2016
  • The standard high-availability seamless redundancy (HSR) protocol utilizes duplicated frame copies of each sent frame for zero fail over time. This means that even in cases of a node or link failure, the destination node will receive at least one copy of the sent frame, resulting in no network downtime. However, the standard HSR is mostly based on the electrical signal connection inside the node, which leads to the production of considerable latency at each node due to frame processing. Therefore, in a large scale HSR ring network, the accumulated latencies become significant and can often restrict the mission-critical real-time application of HSR. In this paper, we present a novel design for optical HSR (OHSR) that uses beam splitting/combining techniques. The proposed OHSR passes the frames directly to adjacent nodes without frame processing at each node, thereby theoretically generating no latency in any node. Various simulations for network samples, made to validate the OHSR design and its performance, show that the OHSR outperforms the standard HSR.

Multi-Slice Joint Task Offloading and Resource Allocation Scheme for Massive MIMO Enabled Network

  • Yin Ren;Aihuang Guo;Chunlin Song
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제17권3호
    • /
    • pp.794-815
    • /
    • 2023
  • The rapid development of mobile communication not only has made the industry gradually diversified, but also has enhanced the service quality requirements of users. In this regard, it is imperative to consider jointly network slicing and mobile edge computing. The former mainly ensures the requirements of varied vertical services preferably, and the latter solves the conflict between the user's own energy and harsh latency. At present, the integration of the two faces many challenges and need to carry out at different levels. The main target of the paper is to minimize the energy consumption of the system, and introduce a multi-slice joint task offloading and resource allocation scheme for massive multiple input multiple output enabled heterogeneous networks. The problem is formulated by collaborative optimizing offloading ratios, user association, transmission power and resource slicing, while being limited by the dissimilar latency and rate of multi-slice. To solve it, assign the optimal problem to two sub-problems of offloading decision and resource allocation, then solve them separately by exploiting the alternative optimization technique and Karush-Kuhn-Tucker conditions. Finally, a novel slices task offloading and resource allocation algorithm is proposed to get the offloading and resource allocation strategies. Numerous simulation results manifest that the proposed scheme has certain feasibility and effectiveness, and its performance is better than the other baseline scheme.

A Hybrid Blockchain-Based Approach for Secure and Efficient IoT Identity Management

  • Abdulaleem Ali Almazroi;Nouf Atiahallah Alghanmi
    • International Journal of Computer Science & Network Security
    • /
    • 제24권4호
    • /
    • pp.11-25
    • /
    • 2024
  • The proliferation of IoT devices has presented an unprecedented challenge in managing device identities securely and efficiently. In this paper, we introduce an innovative Hybrid Blockchain-Based Approach for IoT Identity Management that prioritizes both security and efficiency. Our hybrid solution, strategically combines the advantages of direct and indirect connections, yielding exceptional performance. This approach delivers reduced latency, optimized network utilization, and energy efficiency by leveraging local cluster interactions for routine tasks while resorting to indirect blockchain connections for critical processes. This paper presents a comprehensive solution to the complex challenges associated with IoT identity management. Our Hybrid Blockchain-Based Approach sets a new benchmark for secure and efficient identity management within IoT ecosystems, arising from the synergy between direct and indirect connections. This serves as a foundational framework for future endeavors, including optimization strategies, scalability enhancements, and the integration of advanced encryption methodologies. In conclusion, this paper underscores the importance of tailored strategies in shaping the future of IoT identity management through innovative blockchain integration.

수중 센서 네트워크를 위한 가변 슬롯시간 기반의 MAC프로토콜 (MAC Protocol using Dynamic Slot-Time for Underwater Acoustic Sensor Network)

  • 이동원;김선명;양연모
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.344-347
    • /
    • 2011
  • 전파를 이용하는 지상에서의 무선 센서 네트워크와 달리 수중에서는 음파를 이용하여 통신을 한다. 음파를 이용한 수중 센서 네트워크에서 긴 전파지연과 제한된 대역폭을 위한 많은 연구가 진행되고 있다. 수중 센서 네트워크에서 긴 전파 지연으로 노드가 전송한 패킷(Packet)은 빈번히 충돌한다. 이러한 문제를 해결하기 위해 무선 네트워크에서 이용되는 백오프(Back-off) 기법이 일반적으로 이용된다. 그러나 노드의 배치에 따라 고정된 슬롯시간(Slot-time)은 불필요한 지연시간을 발생시켜 네트워크의 성능을 저하 시킨다. 본 논문에서는 슬롯시간의 동적인 설정 기법을 제안하고 기존에 연구된 MAC 프로토콜에 적용하였다. 마지막으로 기존의 MAC 프로토콜과 제안된 기법을 적용한 MAC 프로토콜의 성능을 비교하고, 그 결과 기존 MAC 프로토콜에 비하여 우수한 성능을 보임을 확인 하였다.

  • PDF

다중 그리드 사이트에서 어플리케이션 특성을 고려한 동적 작업 재배치 정책 (A Dynamic Job Relocation Strategy Considering Application's Characteristics in Multiple Grid Sites)

  • 류경후;이원주;전창호
    • 한국컴퓨터정보학회논문지
    • /
    • 제13권4호
    • /
    • pp.31-37
    • /
    • 2008
  • 본 논문은 다중 그리드 사이트에서 어플리케이션의 특성을 고려한 동적 작업 재배치 정책을 제안한다. 이 정책은 다중 그리드 사이트에서 수행할 어플리케이션의 특성에 따라 계산 집약 어플리케이션 또는 네트워크 집약 어플리케이션으로 분류한다. 또한, 네트워크 집약 어플리케이션을 단일 사이트에 할당하여 사이트간의 통신을 제거함으로써 전체 작업실행시간을 단축한다. 하지만 단일 사이트에 네트워크 집약 어플리케이션을 수행할 유휴 노드 수가 존재하지 않으면 네트워크 지연을 최소화하도록 다중 사이트에 먼저 할당한다. 그리고 단일 사이트에 네트워크집약 어플리케이션을 수행할 수 있는 유휴 노드의 수가 생성되면 다중 사이트에서 수행중인 어플리케이션을 단일사이트로 재배치하여 전체 작업실행시간을 단축한다. 본 논문에서는 시뮬레이션을 통하여 제안한 동적 적업 재배치정책이 기존 스케줄링 정책에 비해 데이터 그리드의 성능 향상 면에서 우수함을 보인다.

  • PDF

PMIPv6에서 MIH 기반의 이기종 네트워크의 연동을 위한 빠른 핸드오버 기법 연구 (Fast-Handover Mechanism for Heterogeneous Network Using MIH in PMIPv6)

  • 김철중;이명규;박석천
    • 한국정보통신학회논문지
    • /
    • 제14권4호
    • /
    • pp.831-840
    • /
    • 2010
  • 무선 인터넷 서비스 특히 PDA, 스마트 폰과 같이 이동성이 높은 무선 단말들의서비스가 활성화 되면서 현재 많은 사용자들은 공간에 제약 없이 다양한 인터넷 서비스들을 사용할 수 있게 되었다. 그러나 사용자가 다양한 무선네트워크를 사용함에 따라 서로 다른 네트워크를 이동 할 경우 이기종 간의 네트워크에서 핸드오버를 지원할 수 있는 기술이 미흡하기 때문에 네트워크 설정에 있어 많은 제약이 발생한다. 따라서 본 논문에서는 PMIPv6에서 IEEE8 02.21 MIH를 활용하여 이 기종 네트워크간의 핸드오버를 지원하고 핸드오버 지연시간을 단축할 수 있는 기법을 제안하고, 제안 기법에 대하여 저속과 고속에서의 이동성을 바탕으로 성능 평가하여, 기존의 PMIPv6 에서의 핸드오버 지연시간에 대하여 26%의 지연시간 단축을 통해 향상된 성능을 확인하였으며 손실되는 데이터 역시 최대 90% 이상 줄일 수 있었다.

이중 연결 구조 CC-NUMA 시스템의 효율적인 상호 연결망 구성 기법 (An efficient interconnection network topology in dual-link CC-NUMA systems)

  • 서효중
    • 정보처리학회논문지A
    • /
    • 제11A권1호
    • /
    • pp.49-56
    • /
    • 2004
  • 반도체 미세 공정의 개발과 더불어, 높아진 집적도 및 동작 클럭의 고속화로 단일 프로세서 시스템 성능은 지속적으로 개선되고 있다. 이 결과 기가헬즈 이상의 클럭 속도를 가지는 개인용 컴퓨터가 보편적인 데스크 탑 시스템으로 자리잡게 되었으며, 불과 수년 전의 고가 대형 시스템은 점차 이러한 작은 시스템들을 상호 연결망으로 연결한 형태로 급속히 대체되어가고 있다. 이러한 구조의 클러스터 컴퓨터는 높은 확장성과 고성능을 얻을 수 있으므로, 점차 그 영역을 확대해나가고 있으나, 상호 연결망의 대역폭 및 지연에 따라 성능 제한 요소는 여전히 존재하고 있으며, 이러한 이유로 SCI, Myrinet, Gigabit Ethernet 등 고속의 상호 연결망이 클러스터 시스템의 연결 구조로 사용되고 있다. 프로세서 속도의 개발과 더불어 상호 연결망의 속도 또한 개선되어 왔는데, 상호 연결망은 그 대역폭을 늘리는 것과, 상호 연결망을 이용한 경우의 통신 시간지연의 축소로 볼 수 있다. 대역폭의 확장 및 지연시간의 단축은 상호 연결망의 고속화를 통하여 이루어질 수 있으나, 작은 면적에 집적되어 있는 프로세서와는 달리, 보다 넓은 면적에 펼쳐져 있는 상호 연결망의 동작 속도는, 물리적 거리에 의한 지연으로 인하여 개선의 난이도가 높으며, 따라서 클러스터 시스템의 확장 규모는 상호 연결망의 병목 현상에 의하여 제한된다고 할 수 있다. 이러한 이유로 보다 높은 대역폭의 상호 연결망을 구현하려는 노력은 복수개의 연결 구조를 이용한 형태로 개선되어 왔으며, 고속으로 동작하는 SCI 점 대 점 연결구조론 이용한 다중연결 형태의 시스템이 활발히 연구되어 왔다. 본 논문은 이러한 이중 점 대 점 연결 구조 시스템의 성능 제한 요소인 접근 시간 및 효율을 개선하기 위하여, 두개 중 하나의 점 대 점 연결을 링 형태로, 나머지 하나는 링을 몇 개의 노드의 묶음으로 분할하여 연결하는 구성을 제시하였으며, 방송 및 일 대 일 전송에 적합한, 간단하고 효율적인 경로 설정 방법과 적절한 묶음의 수를 제시하였다. 본 논문에 제시한 구조의 시스템의 성능 측정의 비교 대상으로, 최신 시스템에 채용되어 있는 반대방향 이중 링 구조를 비교 대상으로 하였으며, 반대방향 이중 연결 구조에 비하여 단 논문에 제시한 상호연결망 구성 및 트랜잭션 경로 설정 방법이 상대적으로 우수함을 시뮬레이션을 통하여 검증하였다. 실험 결과, 본 논문에서 제안한 상호연결망 구조 및 트랜잭션 경고 설정 방법을 이용한 경우, 반대방향 이중 링 구조의 시스템 구조에 비하여 단위 트랜잭션의 처리 시간이 1.05∼l.11배 향상되었으며, 시스템의 성능은 1.42∼2.1배 향상되었다.