• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.2
• /
• pp.111-116
• /
• 2012

In this paper, we fabricate a WiFi based video transmitting equipment and establish a video transmitting system for realtime transmitting of accident scene on expressways. The transmitting equipment is based on the H.264 video codec and embed WiFi module. The transmitting equipment can transmit video and also meta data such as location positioning through the Wibro network using a Wibro terminal. From test results, it is clear that high density videos were transmitted while the vehicle carried by the video equipment was traveling with velocity of 80 km/h.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7B
• /
• pp.450-463
• /
• 2005

This paper aims to find influencing factors for firms to adopt network equipments which based on Advanced Telecom Computing Architecture (ATCA). ATCA suggests a standardized specification for telecom equipments design. This new paradigm of developing network equipment provides benefits for network equipment manufacturers by reducing development time for new equipments with lower CapEx and OpEx. It also deliver oportunities for telecom services providers to exploit or test new services by replacing or upgrading part of total system with modular based network equipments. The research model basically depends on various researches based on Rogers' Innovation and Diffusion theory and it is verified through an empirical study for ninety-one domestic forms. Binary logistic regression was conducted to find the relationship between purchase intention and factors affecting new technology adoption. As a result, two factors such as scalability and cost/benefit effectiveness of the new system were statistically significant. Cluster analysis followed with those two variables. This helps TEMs (Telecom Equipments Manufacturers) get some implications on timing and target customers for diffusing the ATCA based technologies in the market.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.229-231
• /
• 1994

For the effective use of satellite communication transponder, tests for the payload system such as IOT(In-Orbit Test), RPM(Routine Payload Monitoring), CSM(Communicatios System Monitoring), and REV(Remote Earth-Station Verification) have to be conducted. Those tests are used in order to verify the condition and generic design of the satellite, to provide a database for operational calculations, and to maintain the quality of communication services. As the satellite communication system gets with wider expansion with higher complexity of operation, tests for the communication system also need more complex operation that usesophisticated computer-controlled measuring system. For and C language based measurement functions, which uses GPIB protocol and SCPI commands. But SICL requires knowledge of BASIC and C language as well as GPIB and SCPL system. This paper introduces a new language called CALSTEP-Control and Access Language for the Systems of Test Equipment and Payload. This language is designed for the operator to perform the tests for the satellite communication system without any special knowledge that is mentioned above. This language has very limited number of commands which are to be used to control the payload system and test equipments to perform IOT and CSM, and those commands are very readable and easy to understand, so an operator without any knowledge of BASIC and C programming language, or SICL and SCPI command can use it.

• MALSORI
• /
• no.51
• /
• pp.137-149
• /
• 2004

A weather forecast service with speech recognition is described. This service allows users to get the weather information of all the cities by saying the city names with just one phone call, which was not provided in the previous weather forecast service. Speech recognition is implemented in the intelligent peripheral (IP) of the advanced intelligent network (AIN). The AIN is a telephone network architecture that separates service logic from switching equipment, allowing new services to be added without having to redesign switches to support new services. Experiments in speech recognition show that the recognition accuracy is 90.06% for the general users' speech database. For the laboratory members' speech database, the accuracies are 95.04% and 93.81%, respectively in simulation and in the test on the developed system.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.205-207
• /
• 2008

Much signaling equipments are installed along railway tracks, and these are working in cooperation with each other, referring to other signaling equipment status. Existing railway signaling system uses signal cables to transmit this information. This system requires high cost for construction and have the problems like many faults from mistakes in cable connection, etc To solve these problems, JREast Inc. has developed a new signaling system based on network technology, utilizing Ethernet-Passive Optical Network(E-PON). In this paper, we review the system proposed by JREast Inc. and field test results performed on railway.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.252-254
• /
• 2001

Accurate detection and classification of faults on transmission lines is vitally important. High impedance faults(HIF) in particular pose difficulties for the commonly employed conventional overcurrent and distance relays, and if not detected, can cause damage to expensive equipment, threaten life and cause fire hazards. Although HIFs are far less common than LIFs, it is imperative that any protection device should be able to satisfactorily deal with both HIFs and LIFs. This paper proposes an algorithm for fault detection and classification for both LIFs and HIFs using Adaptive Network-based Fuzzy Inference System(ANFIS). The performance of the proposed algorithm is tested on a typical 154[kV] Korean transmission line system under various fault conditions. Test results show that the ANFIS can detect and classify faults including (LIFs and HIFs) accurately within half a cycle.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.105-111
• /
• 2016

In order to inspect the quality of spot welding, inefficient destructive test and NDT (non destructive testing) utilizing expensive foreign ultrasonic inspection are being conducted in the automobile production lines, but NDT will be difficult to be used in the domestic automobile production due to complexity of the waveform analysis and lack of mobility. In this paper, NDT system inspecting the quality of spot welding based on mobile network is proposed to complement drawbacks of the conventional inefficient destructive testing and NDT inspecting the quality of spot welding. Regardless of daily condition of NDT tester, the proposed NDT system can determine the quality of spot welding automatically and transmit the information of NDT quality to smart devices of field workers in real-time so that convenience of NDT and productivity of automobile production will be improved. Several specimens with a variety of welding quality was produced to evaluate the performance of the proposed mobile ultrasonic NDT system and the conventional foreign equipment, through this experiments, the proposed mobile ultrasonic NDT system indicate the superior properties compared to the conventional equipment in terms of convenience, productivity, and economic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2348-2356
• /
• 1997

This paper describes a method of AAL(SSCOP) protocol conformance testing and its result analysis in ATM network. Terminal equipment(TE) that implements protocols for connecting ATM network shall be verified if appropriately implement by conformance testing. The protocol specifications and the testing methodology are recommended or standardized by international standardization organization(ITU-T, ISO, etc.). The ATM AAL (SSCOP) protocol which selected for describing conformance test procedure is standardized in ITU-T Q.2110 and ATM Forum UNI 3.1 which are same in contents. Also Testing standard like ATS for SSCOP is specified in ATM Forum 95-1459R2. Construction of conformance testing environment is necessary to coordinate in relations with standards, then testing must beexecuted at that environment and the results from the test system analyzed. For this, it is necessary to select any test case from standard for testing and to make ETS. The ETS is proted on the test system and conformance testing will execute on that system. Finally the result from the test system is to analyze. This conformance testing procedure is applicable to the same other test cases in SSCOP and protocols in any communcation networks.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.38-44
• /
• 2013

In this paper, we designed and implemented a mobile video transmission device with 1080i resolution and 30fps frame rate using wireless multi-access technologies. The video acquisition delay time of 16us and jitter of 21ms for this equipment were obtained, respectively. The device is designed to access various communication networks. In order to evaluate the performance of its video transmission capability, a server and monitoring viewer are implemented. In the performance test using LTE network, 211ms delay time was obtained at 3Mbps transmission. Rendering of 1fps frame rate at the 265kbps transmission was confirmed for the transmission test using Inmarsat network.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1708-1734
• /
• 2022

In the development of logistics system, the breakthrough of important technologies such as technology platform for logistics information management and control is the key content of the study. Based on Javascript and JQuery, the logistics system realizes real-time monitoring, collection of historical status data, statistical analysis and display, intelligent recommendation and other functions. In order to strengthen the cooperation of warehouse storage, enhance the utilization rate of resources, and achieve the purpose of real-time and visual supervision of transportation equipment and cargo tracking, this paper studies the VNF dynamic deployment and SFC routing problem in the network load change scenario based on the logistics system. The BIP model is used to model the VNF dynamic deployment and routing problem. The optimization objective is to minimize the total cost overhead generated by each SFCR. Furthermore, the application of the SFC mapping algorithm in the routing topology solving problem is proposed. Based on the concept of relative cost and the idea of topology transformation, the SFC-map algorithm can efficiently complete the dynamic deployment of VNF and the routing calculation of SFC by using multi-layer graph. In the simulation platform based on the logistics system, the proposed algorithm is compared with VNF-DRA algorithm and Provision Traffic algorithm in the network receiving rate, throughput, path end-to-end delay, deployment number, running time and utilization rate. According to the test results, it is verified that the test results of the optimization algorithm in this paper are obviously improved compared with the comparison method, and it has higher practical application and promotion value.