• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.6
• /
• pp.643-656
• /
• 2000

MPOA proposed and standardized by the ATM Forum is a protocol tllat provides effective bridging and routing for ATM networks in a diverse network environment. Its plimary goal is to transfer unicast data effectively among the subnets. In this paper, MPOA components are implemented using the SDL(Specification and Description Language) which the ITU has standardized for the development of communication systems. In addition, MPOA procedures for various operations such as address translation for packets from upper layers, Ingress/Egress cache management and shortcut configuration, are examined with tlle help of the SDT(SDL Design Too]) simulator.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.157-160
• /
• 2001

Recently, with the advancement of internet network the system has been needed to be controllable and observable through internet at industrial workplace. In this study, we developed the digital timer which has a communication function to control and observe many kinds of devices by combining relay and timer used for each type of control panel to realize control solution based on internet to be easily applicable at workplace with low cost and adding 485 serial communication module to have parallel expansibility and safety. And, this system was experimented and designed for easy system management and status check from remote station through internet, appling the developed digital timer to parallel sequence control of motor. As the result of experiment, the circuit configuration would be more simplified than the existing, and it is expected that multi-connection control and monitoring can be simply implemented with low cost equipment at industrial workplace.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.86-91
• /
• 2018

This paper is a review of accounts balancing time in small distributed power trading platform using blockchain technology. First, the national VPP energy management system using the AMI applied to this study is introduced and then the accounts balancing time and process of the cryptocurrency coin payment which based on the power generation of pro-consumer certified by power big data analysis in a test bed environment is discussed. Futhermore the configuration of a power Big Data analysis system with GPU Fast Big Data that applies MapD to current lambda architecture is also introduced.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.5
• /
• pp.804-824
• /
• 2021

This study qualitatively explored the case of users utilizing multiple accounts on one social network service to create their own multiple spaces and different personas. The purpose of the study was to understand the behavior of people who use multiple accounts to express their identity online using Carl Jung's personality theory. We used in-depth interviews and the Zaltman metaphor elicitation technique (ZMET), targeting 19 people in their 20s and 30s who use more than one personal account on Instagram. Creating a shared consensus map using the configuration concept of ZMET derived six personas in relation to Instagram accounts. The motivations for the respondents' self-presentation associated with their personas and self-presentation types shown on Instagram were analyzed in terms of persona and fashion and subdivided into five dimensions: relationship management strategic presentation, self-monitoring presentation, competence demonstration presentation, anonymous presentation, and persona-centered presentation. Each respondent's persona and self-presentation formed by the Instagram account was analyzed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.3
• /
• pp.176-182
• /
• 2021

This research proposes a high-frequency circuit that can accurately predict the differential mode noise of single-phase inverters at the circuit design stage. Proposed single-phase inverter high frequency circuit in the work is a form in which harmonic impedance components are added to the basic single-phase inverter circuit configuration. For accurate noise prediction, parasitic components present in each part of the differential noise path were extracted. Impedance was extracted using a network analyzer and Q3D in the measurement range of 150 kHz to 30 MHz. A high-frequency circuit model was completed by applying the measured values. Simulations and experiments were conducted to confirm the validity of the high-frequency circuit. As a result, we were able to predict the resonance point of the differential mode voltage extracted as an experimental value with a high-frequency circuit model within an approximately 10% error. Through this outcome, we could verify that differential mode noise can be accurately predicted using the proposed model of the high-frequency circuit without a separate test bench for noise measurement.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.313-316
• /
• 2021

In the IoT(IoT: Internet of Things) environment, network configuration is essential to collect data generated from objects. Various communication methods are used to process data of objects, and wireless communication methods such as Bluetooth and WiFi are mainly used. In order to collect data of objects, a communication module must be installed to collect data generated from sensors or edge devices in real time. And in order to deliver data to the database, a software architecture must be configured. Data generated from objects can be stored and managed in a database in real time, and data necessary for industrial safety can be extracted and utilized for industrial safety service applications. In this paper, a network environment was constructed using a LoRa(LoRa: Long Range) gateway to collect object data, and a client/server data collection model was designed to collect object data transmitted from the LoRa module. In order to secure the resources necessary for data collection and storage management without data leakage, data collection should be possible in real time. As an application service, location data required for industrial safety can be stored and managed in a database in real time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.669-672
• /
• 2015

Recent Internet of Things (IoT, Internet of Things) that can be applied to various fields as the development of technology has been developed a lot of service and has been developed with the service also for crop management. To manage the essential elements of soil moisture in the crop growth but existing a direct person measuring the fluid point to carry the measuring instrument, if you take advantage of the WPAN (Wireless Personal Area Network) in this paper to manage sensor data, a fixed 3 points (30, 60, 90 cm) and can be managed can be scientifically analyzed the state of growth of the crop. Open field environment is utilized as it is less disturbance of the interference and the frequency of the radio frequency signal of the structure provides a relatively comfortable environment. Therefore, WPAN building and data transmission scheme of the minimum cost is to be developed. In addition, the operation to enter low power mode, the algorithm is necessary because a lot of restrictions on the power supply applied to the sensor nodes and the gateway is constructed in the open field. In the experiment, verifying the effectiveness by using a network configuration of each of the sensor nodes and the gateway, and provides a method for time synchronization of the operation and a low power mode. The study protocol for the RF communication with the LoRa and to enhance communication efficiency is needed in the future.

• Structural Monitoring and Maintenance
• /
• v.2 no.1
• /
• pp.77-93
• /
• 2015

The idea of using measured dynamic characteristics for damage detection is attractive because it allows for a global evaluation of the structural health and condition. However, vibration-based damage detection for complex structures such as long-span cable-supported bridges still remains a challenge. As a suspension or cable-stayed bridge involves in general thousands of structural components, the conventional damage detection methods based on model updating and/or parameter identification might result in ill-conditioning and non-uniqueness in the solution of inverse problems. Alternatively, methods that utilize, to the utmost extent, information from forward problems and avoid direct solution to inverse problems would be more suitable for vibration-based damage detection of long-span cable-supported bridges. The auto-associative neural network (ANN) technique and the probabilistic neural network (PNN) technique, that both eschew inverse problems, have been proposed for identifying and locating damage in suspension and cable-stayed bridges. Without the help of a structural model, ANNs with appropriate configuration can be trained using only the measured modal frequencies from healthy structure under varying environmental conditions, and a new set of modal frequency data acquired from an unknown state of the structure is then fed into the trained ANNs for damage presence identification. With the help of a structural model, PNNs can be configured using the relative changes of modal frequencies before and after damage by assuming damage at different locations, and then the measured modal frequencies from the structure can be presented to locate the damage. However, such formulated ANNs and PNNs may still be incompetent to identify damage occurring at the deck members of a cable-supported bridge because of very low modal sensitivity to the damage. The present study endeavors to enhance the damage identification capability of ANNs and PNNs when being applied for identification of damage incurred at deck members. Effort is first made to construct combined modal parameters which are synthesized from measured modal frequencies and modal shape components to train ANNs for damage alarming. With the purpose of improving identification accuracy, effort is then made to configure PNNs for damage localization by adapting the smoothing parameter in the Bayesian classifier to different values for different pattern classes. The performance of the ANNs with their input being modal frequencies and the combined modal parameters respectively and the PNNs with constant and adaptive smoothing parameters respectively is evaluated through simulation studies of identifying damage inflicted on different deck members of the double-deck suspension Tsing Ma Bridge.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.4
• /
• pp.103-109
• /
• 2009

The construction industry has the highest death rate related to safety accidents of any industry. Furthermore, in contrast to other industries, where the death rate related to safety accidents has been steadily declining, both the death toll and the number of accidents in the construction industry have been on the rise. Construction accidents occur when various risks increase in an intertwined way to reach a tipping point; a moment when such factors cannot be tolerated any longer Conventional safety management methods have restrictions in terms of their ability to fully prevent all types of safety accidents. This research considers ways in which USN technology can be applied to safety management on a construction site, and derives a method of applying USN technology for safety management monitoring. The tasks related to safety management on construction sites, as well as the occurrence of accidents, are first analyzed. By analyzing the characteristics of construction accidents, the factors that must be a priority and the factors that can be a lower priority are derived. Finally, the configuration of a monitoring system for safety management on a construction site to which USN technology is applied is presented. It is expected that safety accidents can be prevented from occurring on construction sites by applying this cutting-edge USN technology.

• The Journal of the Korea Contents Association
• /
• v.2 no.1
• /
• pp.86-97
• /
• 2002

In this thesis, we propose a high-speed information network management mode based on layering and partitioning concepts of ITU-T G.805 We describe an information mood of the configuration of VP and VC networks and an information mode to manage faults in high-speed information networks. In order to efficient manage faults, us distinguish between an alarm with a fault that has negative effects on services and an alarm with an alert that barely affects services. Thus, we propose two types of computational models to treat all of these alarms, a fault alarm processing system and an alert alarm processing system. We also describe procedures of alarm processing and we describe the scope and processing course of NMS and SubNMS when rerouting a fault VP and VC fault connection. Lastly, we describe the implementation and analysis of the performance of the proposed fault alarm processing system. We compare the alarm processing tire of each priority according to the alarm occurrence ratio.