• Environmental and Resource Economics Review
• /
• v.24 no.3
• /
• pp.573-605
• /
• 2015

This study proposed scenarios of tax reform regarding taxation on bituminous coal for power generation since July 2015 and July 2014, estimated its impact on SMP, settlement price, tax revenue from year 2015 to year 2029. These scenarios are compared with those of the standard scenario. To estimate them, the power system simulation was performed based on the government plan, such as demand supply program and the customized model to fit Korea's power system and operation. Imposing a tax on bituminous coal for power generation while maintaining tax neutrality reducing tax rate on LNG, the short-term SMP is lowered than the one of the standard scenario. Because the cost of nuclear power generation is still smaller than costs of other power generation, and the nuclear power generation rarely determines SMPs, the taxation impact on SMP is almost nonexistent. Thus it is difficult to slow down the electrification of energy consumption due to taxation of power plant bituminous coal in the short term, if SMP and settlement price is closely related. However, in the mid or long term, if the capacity of coal power plant is to be big enough, the taxation of power plant bituminous coal will increase SMP. Therefore, if the tax reform is made to impose on power plant bituminous coal in the short term, and if the tax rate on LNG is to be revised after implementing big enough new power plants using bituminous coal, the energy demand would be reduced by increasing electric charges through energy tax reform. Both imposing a tax on power plant bituminous coal and reducing tax rate on LNG increase settlement price, higher than the one of the standard scenario. In the mid or long term, the utilization of LNG complex power plants would be lower due to an expansion of generating plants, and thus, the tax rate on LNG would not affect on settlement price. Unlike to the impact on SMP, the taxation on nuclear power plants has increased settlement price due to the impact of settlement adjustment factor. The net impact of energy taxation will depend upon the level of offset between settlement price decrease by the expansion of energy supply and settlement price increase by imposing a tax on energy. Among taxable items, the tax on nuclear power plants will increase the most of additional tax revenue. Considering tax revenues in accordance with energy tax scenarios, the higher the tax rate on bituminous coal and nuclear power, the bigger the tax revenues.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.14
• /
• pp.123-131
• /
• 1973

1. In order to evaluate the performance of the $F_2$ and $F_3$ generations of $F_1$ varietal crosses which in past trials yielded better than or as high as the recommended double-cross hybrids, eleven yellow and five white-endosperm $F_1$ varietal crosses, their $F_2$ and $F_3$ generations, and the parental open-pollinated varieties together with the standard double-cross hybrids were tested in performance trials in the 1963 wet and 1963-64 dry seasons. The former trials, however, failed due to a strong typhoon that damaged the crop. 2. Net hybrid vigor was highly manifested in grain yield in the $F_1$ varietal crosses, which on the average was 39.9 per cent of the mid-parent yields. Reduction in heterosis was 27.2 per cent in the $F_2$and 30.3 per cent in the $F_3$ generation, respectively. 3. A fairly high degree of reduction in yield occurred in the $F_2$ and $F_3$ generation. On the average, the $F_2$ generation decreased by 17.6 per cent and the $F_3$ by 20.7 per cent. The losses in two generations were exhibited in two levels; four crosses decreased by 10.9 per cent and twelve combinations by 22.0 per cent. The advanced generations of one yellow cross, Cuban Yellow Flint ${\times}$ Hawaiian Flinty Dent, and three white flint crosses, Bicol White Flint ${\times}$ Eto Blanco, College White Flint ${\times}$ Eto Blanco and Bicol White Flint ${\times}$ Nariono 330b, yielded as high as Philippine Hybrid No.1 and Philippine Hybrid No.4, respectively. 4. No significant differences in yield were obtained between the $F_2$ and $F_3$ populations, showing that genetic equilibrium was reached in $F_2$, as may be expected in view of the Hardy-Weinberg law on panmixis. 5. As in past trials, Hawaiian Flinty Dent, a variety, yielded as high as Philippine Hybrid No. 1.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.6
• /
• pp.799-805
• /
• 1998

In present paper, we examined the flayer constituents and functionality of two stage enzyme hydrolysates (TSEH) of purplish clam and oyster, and also examined reappearance of oyster flavors through repreparation of individual flayer constituents. Total free amino acid contents in TSEH was $1943.0mg\%$ for purplish clam and was $5066.2 mg\%$ for oyster, respectively, Major free amino acids in purplish clam extracts were taurine, glutamic acid, glycine, alanine, Iysine and arginine, and in oyster extracts were taurine, asparagine, glutamic acid, valine, leucine, alanine, Iysine and arginine. As for nucleotides and related compounds, AMP was the principal component though small amounts in TSEH of purplish clam and oyster, and also contents of TMAO, total creatinine, and betaine were $41.2 mg\%,\;35,9 mg\%$ and $220.9 mg\%$ for that of purplish clam and $3.51 mg\%,\;33.4 mg\%$ and $380.9 mg\%$ that of oyster, respectively. The major inorganic ions in TSEH of both samples were Na, K, P, Cl and $PO_4$, and major non-volatile organic acid was succinic acid. The TSEH of purplish clam and oyster revealed very higher inhibition effect ($84.1\%,\;77.0\%$) in ACE inhibition than that ($0\~44.7\%$) of water and autolytic extract. A synthetic oyster extract prepared from pure chemicals on the basis of the analytical data on the TSEH, satisfactorily reproduced the taste of the natural extract except for a slight lack of mildness and odor. From the omission test the major taste compounds of oyster extract were free amino acid and inorganic ions. The quaternary ammonium bases, nucleotides and related compounds seemed to net an auxiliary role in taste of that.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.4
• /
• pp.527-536
• /
• 1996

The patterns of diel horizontal migration (DHM) of 7 copepod species are compared as part of a general investigation of the zooplankton adaptations to the surf zone habitats. In a sandy shore surf zone of Yongil Bay, 3 sites such as the bottom and surface of 1 m water depth and water's edge are sampled with a sledge net(n=108). The surf zone copepod assemblage is dominated by 7 species; Acartia hudsonica, Fseudodiaptomus marinus, Paracalanus indicus, Calanus sinicus, Oithona similis, Sinocalanus tenellus and Labidocera bipinnata. Threefold variations in copepod abundance are observed within a diel cycle. Abundances of 7 dominant species and total copepods captured in the surface exhibit significant diel differences, but those taken in the bottom are not significantly affected by diel period. It is shown that about $90\%$ of the surf zone copepods performed DHM. The nocturnal high densities of copepods occurred for a neap tide when the offshore winds prevailed, suggesting the animals' ability for horizontal orientation and an active locomotion without invoking passive transportation by currents. Photoreactive behavior of copepods triggered by relative changes in light intensity may be a primary factor inducing DHM by aggregating in the surf zone during the night and spreading out at day; then copepods may reduce encounters with visual predators. In A. hudsonica, ontogenetic variations in timings of DHM are evident. Such variations are likely to minimize intraspecific competition for diets. Data on shoreward migration of copepods indicate that A. hudsonica, P. indicus, O. similis and S. tenellus can maintain swimming velocities of about $20m\;h^{-1}$ for durations of more than an hour. Our observations of strong diel difference in abundances point out the need for both day and night samplings in surf zone habitats, if the importance of these habitats to planktonic copepods are to be fully understood.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.691-699
• /
• 1997

In order to find out the properties in flow resistance of trawlR=1.5R=1.5\;S\;v^{1.8}\;S\;v^{1.8} nets and the exact expression for the resistance R (kg) under the water flow of velocity v(m/sec), the experimental data on R obtained by other, investigators were pigeonholed into the form of $R=kSv^2$, where $k(kg{\cdot}sec^2/m^4)$ was the resistance coefficient and $S(m^2)$ the wall area of nets, and then k was analyzed by the resistance formular obtained in the previous paper. The analyzation produced the coefficient k expressed as $$k=4.5(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ in case of bottom trawl nets and as $$k=5.1\lambda^{-0.1}(\frac{S_n}{S_m})^{1.2}v^{-0.2}$$ in midwater trawl nets, where $S_m(m^2)$ was the cross-sectional area of net mouths, $S_n(m^2)$ the area of nets projected to the plane perpendicular to the water flow and $\lambda$ the representitive size of nettings given by ${\pi}d^2/2/sin2\varphi$ (d : twine diameter, 2l: mesh size, $2\varphi$ : angle between two adjacent bars). The value of $S_n/S_m$ could be calculated from the cone-shaped bag nets equal in S with the trawl nets. In the ordinary trawl nets generalized in the method of design, however, the flow resistance R (kg) could be expressed as $$R=1.5\;S\;v^{1.8}$$ in bottom trawl nets and $$R=0.7\;S\;v^{1.8}$$ in midwater trawl nets.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.5
• /
• pp.700-707
• /
• 1997

In order to express exactly the total resistance of bottom trawl nets subjected simultaneously to the water flow and the bottom friction, the influence of frictional force was added to the formular for the flow resistance of trawl nets obtained by previous papev and the experimental data obtained by other investigators were analyzed by the formula. The analyzation produced the total resistance R (kg) expressed as $$R=4.5(\frac{S_n}{S_m})^{1.2}S\;v^{-1.8}+20(Bv)^{1.1}$$ where $S(m^2)$ was the wall area of nets, $S_m\;(m^2)$ the cross-sectional area of net mouths, $S_n\;(m^2)$ the area of nets projected to the plane perpendicular to the water flow, B (m) the made-up circumference at the fore edge of bag parts, and v(m/sec) the dragging velocity. From the viewpoint that expressing R in the form of $R=kSv^2$ was a usual practice, however, the resistant coefficient $k(kg{\cdot}sec^2/m^4)$ was compared with the factors influencing it by reusing the experimental data. The comparison gave that the coefficient k might be expressed approximately as a function of BL only and so the resistance R (kg) as $$R=18{\alpha}B^{0.5}L\;v^{1.5}$$ where L (m) was the made-up total length of nets and $\alpha=S/BL$. But the values of a in the nets did not deviate largely from their mean, 0.48, for all the nets and so the general expression of R (kg) for all the bottom trawl nets could be written as $$R=9\;B^{0.5}\;L\;v^{1.5}$$.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.163-174
• /
• 2006

The purpose this study is to discuss effects of product design innovations on small and medium enterprises' business accomplishments and further on raising those enterprises' international competitiveness through reviewing previous studies that quantitatively analyzed economic and technological performance and ripple effects of products developed through design innovations. To determine how much design innovations are influential and contributing to small and medium enterprises' international competitiveness, then, the researcher took most advantage of statistical data from quantitative analyses of business accomplishments brought by design innovation development and investment, or economic effects like sales and exports increase. Results of the study can be summarized as follows. First, product design innovations by small and medium enterprises directly contribute to creating plenty of technological and economical achievements, for example, improved product quality, increased product profitability, the effect of product differentiation, improved price competitiveness and increased business sales and exports. Second, technological and economic achievements brought by product design innovations can directly lead to ripple effects like accumulating related knowledge and know-hows, strengthening the competitiveness of products, improving corporate image, increasing business sales and net profit, and meeting many different consumer requirements. Third, technological and economic achievements and ripple effects brought by product design innovations all become very important factors and sources on which small and medium enterprises strengthen their international competitiveness in world markets and maintain their sustainable competitive advantage. Fourth, business accomplishments or economic effects brought by design innovations can be quantitatively measured and analyzed with statistical data. Additional data from the moves can help understand and express the very value or nature of design in a quantitative way. This study is significant in that its results was made based on statistical data from empirical, objective measurements and quantification. The researcher hopes that the study contributes to promoting design innovations by small and medium enterprises and helps CEOs of those businesses better understand the very value and nature of design.

• Korean Journal of Animal Reproduction
• /
• v.22 no.1
• /
• pp.1-9
• /
• 1998

This study was carried out to confirm whether the developmental capacity of bovine mature oocytes frozen ultra-rapidly using electron microscopic(EM) grids and EFS30 can be obtained, and whether the cryoprotectants and the freezing method used in this study effect detrimentally to the bovine oocytes by indirect immunocytochemistry. As freezing solution, we used EFS30 which consisted of 30% ethylene glycol, 0.5 M sucrose, 18% ficoll and 10% FBS added in D-PBS. The results obtained in this experiment were summarized as follows: When the effects of cryoprotectant and freezing procedure on the microtuble, micrfilament and chromatin morphology of oocytes were evaluated using indirect immunocytochemistry, the results of freezing as well as exposure group were not different with that of the control oocytes. When the fertilization abnormality after ultrarapid freezing of bovine mature oocytes was examined by Hoechst staining, the rates of total penetration(96.7, 9.0%), normal two pronuclei formation(74.6, 68.9%) and mean number of sperm / oocyte(1.50, 1.44) were not different between control and freezing group. In addition, when the developmental capacity of frozen-thawed of oocytes(85.5%) was survived, 74.5% of them were cleaved and 31.4% of cleaved embryos were developed to blastocyst. These data were similar to those of the control(76.0%, 34.6%) and exposure(74.5%, 33.0%) except survival rates. Also, when the total cell number of blastocysts produced from the each treatment at day after IVF was examined by hoechst staining, there were not different among groups. There results demonstrate that developmental capacity of frozen-thawed bovine mature oocytes can be successfully obtained by ultra-rapid freezing method using EM grid and EFS30 solution.

• Journal of Animal Science and Technology
• /
• v.45 no.3
• /
• pp.443-454
• /
• 2003

This study was conducted to investigate the effects of dietary full-fat soybeans and linseed as fat sources on in vitro ruminal disappearances of dry matter and unsaturated fatty acids and fatty acids profile. The full-fat soybeans and linseed were high in linoleic acid (C18:2n-6) and $\alpha$-linolenic acid (C18:3n-3), respectively. The incubation times were 0, 3, 6, 12, 24, 48 and 72 h. After each time of incubation, medium digesta was lyophilized for analyzing its DM and fatty acids contents. DM disappearance was significantly higher in linseed treatment compared to full-fat soybeans treatment on 6 h (p<0.01), 12 h (p<0.05) and 24 h (p<0.01), but cumulative gas production was not significantly different between both treatments. Stearic acid (C18:0) content in medium digesta was increased in both soybeans and linseed as a result of complete biohydrogenation with increased incubation time and C18:0 and C18:1 contents of full-fat soybeans were significantly higher than those of linseed (p<0.05). The content of C18:2 and C18:3 in digesta of each treatment were decreased by biohydrogenation as incubation time was increased. The content of C18:2 in full-fat soybeans was significantly higher than that of linseed (p<0.05) while the content of C18:3 in linseed was significantly higher than that of full-fat soybeans (p<0.001). Net C18:0 production was significantly higher in full-fat soybeans (332.24%) than linseed (133.16%) on 72 h. Disappearance of C18:1 was significantly lower in full-fat soybeans than linseed (p<0.05), especially full-fat soybeans showed negative (-) values on 3, 6, 12 and 24 h. The disappearance of C18:3 was significantly higher in linseed than full-fat soybeans (p<0.05). The disappearance of C18-unsaturated fatty acid was significantly higher in linseed than full-fat soybeans. In conclusion, polyunsaturated fatty acid (PUFA) in both full-fat soybeans and linseed were extensively biohydrogenated. In addition, biohydrogenation of PUFA was more completed to C18:0 in full-fat soybeans than linseed, reflecting dietary PUFA composition.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.