• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.119-126
• /
• 2023

Due to the COVID-19 phenomenon, more than one-third of SMEs in Korea have been working from home. Therefore, we tried to find out the management status of SMEs and find policy support. The survey data was based on the Bank of Korea's corporate management analysis 2021 data. As a result of the study, the debt of SMEs increased from 362 trillion won(2019) to 409 trillion won(2022), while their capital decreased from 489 trillion won(2019) to 336 trillion won(2022). Net profit and loss increased to 14.9 trillion won(2019) and 23.3 trillion won(2021). As a result of the company's financial soundness analysis, First, for stability, the current ratio was high compared to the total industry and the dependence on borrowings was high. Second, profitability improved from 3.20%(2019) to 4.28%(2021), but it was lower than 5.01%(2021) for all industries. Third, the growth rate showed an increase of 12.43%, which is 1.57 times faster than the total asset growth rate of 7.94%(2021) for all industries. As for the growth rate of sales, all industries(2021) showed (-)growth, while SMEs among manufacturing industries showed a growth rate of 14.78%. Fourth, as for activity, the total asset turnover ratio was higher at 0.96% compared to 0.73 for all industries. In conclusion, stability and profitability were low and growth potential was high compared to all industries. In the future, policies that focus on industries with high growth potential are needed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1B
• /
• pp.95-109
• /
• 2008

We numerically analyzed the nonlinear shoaling, a plunging breaker and its accompanying energetic suspension of sediment at a bed, and a redistribution of suspended sediments by a down rush of preceding waves and the following plunger using SPH with a Gaussian kernel function, Lagrangian Dynamic Smagorinsky model (LDS), Van Rijn's pick up function. In that process, we came to the conclusion that the conventional model for the tractive force at a bottom like a quadratic law can not accurately describe the rapidly accelerating flow over a swash zone, and propose new methodology to accurately estimate the bottom tractive force. Using newly proposed wave model in this study, we can successfully duplicate severely deformed water surface profile, free falling water particles, a queuing splash after the landing of water particles on the free surface and a wave finger due to the structured vortex on a rear side of wave crest (Narayanaswamy and Dalrymple, 2002), a circulation of suspended sediments over a swash zone, net transfer of sediments clouds suspended over a swash zone toward the offshore, which so far have been regarded very difficult features to mimic in the computational fluid mechanics.

• Korean Journal of Ichthyology
• /
• v.35 no.2
• /
• pp.129-135
• /
• 2023

The diet composition of skinnycheek lanternfish, Benthosema pterotum were collected by bottom trawl net in the South Sea of Korea during 2021 (February, May, August, and November) and 2022 (February, April, August, and November). The size of the specimens ranged from 16 to 73 mm in total length. B. pterotum were mesopelagic carnivores that mainly consumed euphausiids and copepods. Its diets included small quantities of amphipods, shrimps, mysids, etc. We calculated the trophic level as 3.16 for B. pterotum. The individuals of small size class (<40 mm) fed mainly on copepods. In the next size classes (40~45 mm, 45~50 mm, 50~55 mm), copepods' proportion decreased and euphausiids increased. In the largest class (55~60 mm and ≥60 mm), the proportion of euphausiids' decreased, and shrimps increased. As the body size of B. pterotum increased the mean weight of prey per stomach (mW/ST) tended to significantly increase (One-way ANOVA, P<0.05).

• 한국노년학
• /
• v.39 no.2
• /
• pp.325-345
• /
• 2019

The purpose of this study is a exploratory study for understanding the process of the social isolation of the socially isolated elderly through the approach to their life history. The research was analyzed by one of the methods of qualitative research on life history, the conceptual framework of 'Dimensions, turning, and adaptation' of Mandelbaum(1973). According to the results of this study, the socially isolated elderly people were found to be socially isolated by experiencing complex difficulties such as family disconnection, poverty, poor job and health deterioration. Specifically, in the area of life, there was experience of poor relationship with parent, absence of family, poverty of family and unfavorable relationship with surrounding people in life with original family before isolation. They had bad jobs in the labor market, such as hard labor, delivery, business, and chores. In the area of turning point, we experienced family break due to the separation of the original family and the spouse due to various reasons such as financial crisis, parental divorce and death, spouse affair, economic difficulty. In a transitional stage in the life, many reasons such as the financial crisis, the death of parents, the extramarital affair and economic difficulties led to the disconnection from their original family and their spouses. In an adaptive phase, participants accepted the changed life at each turning point in their lives, carrying out their roles, compromising and trying to adapt properly. He said that their current life, which has entered the social safety net system of the people's basic recipients, has led him to live a more stable life and is adapting to personal hobbies and vicarious satisfaction through networks. This result is somewhat different from previous studies in which isolated elderly people were severely exposed to the risk of depression and loneliness. However, we should also consider the characteristics of this study that interviewed elderly people with relatively low isolation. Based on the results of this research, he presented various practical policy implications.

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3913-3923
• /
• 2023

Todays, medium energy resolution detectors are preferably used in radioisotope identification devices(RID) in nuclear and radioactive material categorization. However, there is still a need to develop or enhance « automated identifiers » for the useful RID algorithms. To decide whether any material is SNM or NORM, a key parameter is the better energy resolution of the detector. Although masking, shielding and gain shift/stabilization and other affecting parameters on site are also important for successful operations, the suitability of the RID algorithm is also a critical point to enhance the identification reliability while extracting the features from the spectral analysis. In this study, a RID algorithm based on Bayesian statistical method has been modified for medium energy resolution detectors and applied to the uranium gamma-ray spectra taken by a LaBr3:Ce detector. The present Bayesian RID algorithm covers up to 2000 keV energy range. It uses the peak centroids, the peak areas from the measured gamma-ray spectra. The extraction features are derived from the peak-based Bayesian classifiers to estimate a posterior probability for each isotope in the ANSI library. The program operations were tested under a MATLAB platform. The present peak based Bayesian RID algorithm was validated by using single isotopes(²⁴¹Am, ⁵⁷Co, ¹³⁷Cs, ⁵⁴Mn, ⁶⁰Co), and then applied to five standard nuclear materials(0.32-4.51% at.²³⁵U), as well as natural U- and Th-ores. The ID performance of the RID algorithm was quantified in terms of F-score for each isotope. The posterior probability is calculated to be 54.5-74.4% for ²³⁸U and 4.7-10.5% for ²³⁵U in EC-NRM171 uranium materials. For the case of the more complex gamma-ray spectra from CRMs, the total scoring (ST) method was preferred for its ID performance evaluation. It was shown that the present peak based Bayesian RID algorithm can be applied to identify ²³⁵U and ²³⁸U isotopes in LEU or natural U-Th samples if a medium energy resolution detector is was in the measurements.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.496-504
• /
• 2023

Countries worldwide are striving to find new sources of sustainable energy without carbon emission due to the increasing impact of global warming. With the advancement of the fourth industrial revolution on a global scale, there has been a substantial rise in energy demand. Simultaneously, there is a growing emphasis on utilizing energy sources with minimal or zero carbon content to ensure a stable power supply while reducing greenhouse gas emissions. In this comprehensive overview, a comparative analysis of carbon reduction policies of government was conducted. Based on international carbon neutrality scenarios and the presence of remaining thermal power generation, it can be categorized into two types: "Rapid" and "Safety". For the domestic scenario, the projected power demand and current greenhouse gas emissions in alignment with "The 10th Basic Plan for Electricity Supply and Demand" was examined. Considering all these factors, an overview of the current status of carbon neutrality technologies by focusing on the energy sector, encompassing transitions, hydrogen, transportation and carbon capture, utilization, and storage (CCUS) was offered followed by summarization of key technological trends and government-driven policies. Furthermore, the central aspects of the domestic carbon reduction strategy were proposed by taking account of current mega trends in the energy sector which are highlighted in international scenario analyses.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.11
• /
• pp.113-123
• /
• 2023

This paper introduces the Cherry system, a user-independent blockchain donation system. This is a procedure that is delivered to the beneficiary's bank account through a virtual account when a donor makes a donation, so there is no difference from the existing donation delivery method from the user's point of view However, within the blockchain, Cherry Points, a virtual currency based on the user ID, are issued and delivered to the beneficiary, while all transactions and the beneficiary's usage history are managed on the blockchain. By adopting this method, there was an improvement in blockchain performance, with transaction processing exceeding 1,000 TPS in typical transaction condition and service completion within 21.3 seconds. By applying the automatic influence control algorithm to this system, the influence according to stake, which is an individual donation, is greatly reduced to 0.3 after 2 months, thereby concentrating influence could be controlled automatically. In addition, it was designed to enable micro tracking by adding a tracking function by timestamp to the donation ledger for each individual ID, which greatly improved the transparency in the use of donations. From a service perspective, existing blockchain donation systems were handled as limited donation delivery methods. Since it is a direct service in a user-independent method, convenience has been greatly improved by delivering donations in various forms.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.91-98
• /
• 2023

Recently, according to development of artificial intelligence, a wide range of industry being automatic and optimized. Also we can find out some research of using supervised learning for deteceting defect of railway in domestic rail industry. However, there are structures other than rails on the track, and the fastener is a device that binds the rail to other structures, and periodic inspections are required to prevent safety accidents. In this paper, we present a method of reducing cost for labeling using semi-supervised and transfer model trained on rail fastener data. We use Resnet50 as the backbone network pretrained on ImageNet. At first we randomly take training data from unlabeled data and then labeled that data to train model. After predict unlabeled data by trained model, we adopted a method of adding the data with the highest probability for each class to the training data by a predetermined size. Futhermore, we also conducted some experiments to investigate the influence of the number of initially labeled data. As a result of the experiment, model reaches 92% accuracy which has a performance difference of around 5% compared to supervised learning. This is expected to improve the performance of the classifier by using relatively few labels without additional labeling processes through the proposed method.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.936-949
• /
• 2023

On August 3, 2023, a brutal incident of unprovoked violence, termed as "Abnormal motivated crime," occurred in a multi-use facility, where retail and transportation facilities converge, near Seohyeon Station. The assailant drove onto the sidewalk, hitting pedestrians, and then entered a department store where a knife rampage ensued, resulting in a total of 14 victims. In the aftermath of this incident, numerous murder threats were posted on social media, causing widespread anxiety among the public. This fear was further exacerbated by the emergence of a "Terrorless.01ab.net" service. Purpose: This research aims to explore necessary institutional improvements for private security personnel who protect customers and employees in multi-use facilities, to enable them to perform their duties more effectively. Method: To assess the risk of Abnormal motivated crime, a time series analysis using the ARIMA model was conducted to analyze the domestic trends of such crimes. Additionally, Result: the study presents suggestions for improvements in the domestic security service law and emergency manuals for multi-use facilities. Conclusion: This is informed by a legal analysis of the indemnity rights for weapon use by private security guards abroad and their operational authority beyond weapon usage.

• Journal of Internet of Things and Convergence
• /
• v.9 no.6
• /
• pp.93-98
• /
• 2023

In paddy rice farming, water management is a critical task. To suppress weed emergence during the early stages of growth, fields are deeply flooded, and after transplantation, the water level is reduced to promote rooting and stimulate stem generation. Later, water is drained to prevent the production of sterile tillers. The adequacy of water supply is influenced by various factors such as field location, irrigation channels, soil conditions, and weather, requiring farmers to frequently check water levels and control the ingress and egress of water. This effort increases if the fields are scattered in remote locations. Automated irrigation systems have been considered to reduce labor and improve productivity. However, the net income from rice production in 2022 was about KRW 320,000/10a on average, making it financially unfeasible to implement high-cost devices or construct new infrastructure. This study focused on developing an IoT-Based irrigation valve that can be easily integrated into existing agricultural infrastructure without additional construction. The research was carried out in three main areas: Firstly, an irrigation valve was designed for quick and easy installation on existing agricultural pipes. Secondly, a power circuit was developed to connect a low-power Cat M1 communication modem with an Arduino Nano board for remote operation. Thirdly, a cloud-based platform was used to set up a server and database environment and create a web interface that users can easily access.