• Bulletin of the Korean Chemical Society
• /
• v.21 no.8
• /
• pp.793-796
• /
• 2000

In the neat flow vacuum pyrolysis of 2-methoxy-2-(o-N,N+dimethylaminomethyl)phenyl-3-trimethylsilyl-5,5-dime-thyl-2-silahexane (4) at $600^{\circ}C$ and its static thermolysis at $350^{\circ}C23-benzo-5-aza-1-silacyclohexane$, (5) has been obtained in97% and 46％ y ields, respectively. Product 5 might have been formed via an intramolecular rearrangement invoIving a zwitterionic species generated from the pentacoordinated silene Si-atom. From trapping experiments with an excess of MeOH, we have obtained 2-(o-N,N-dimethylaminomethyl)phenyl-5,5-dimethyl-2-trimethylsiloxy-2-silahexane (6) and 2-(o-N,N-dimethylaminomethyl)phenyl-2-methoxy-5,5-dime-thyl-2-silahexane (7) formed via an intermolecular protodesilylation reaction rather than through trapped prod-ucts of the silene.

• Journal of Adhesion and Interface
• /
• v.15 no.2
• /
• pp.69-76
• /
• 2014

Two kinds of epoxy-functionalized alkoxysilane (EAS) compounds (EAS-MS and EAS-ES) were successfully synthesized through the reaction between epoxy resin (YD-128) and aminopropyl trimethoxysilane (APTMS) or aminopropyl triethoxysilane (APTES). By the hydrolysis-polycondensation reaction of EAS compounds with 3-Glycidyloxypropyl trimethoxysilane (GPTMS) and Tetraethyl orthosilicate (TEOS), silica/epoxy nanohybrids could be prepared at various compositions of EAS to GPTMS/TEOS. Prepared nanohybrids were yellow transparent and miscible with various organic solvents. By the reaction silica/epoxy nanohybrids with curing agents (TETA or acrylic acid), cured hybrids films could be obtained. These cured films showed higher thermal stability and mechanical property compared to cured neat epoxy resin. TEM and AFM images showed formation of nano-sized silica nanoparticles within cured hybrid films.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.334-338
• /
• 2009

Trifunctional epoxy resin triglycidyl paraaminophenol (TGPAP)/$CaCO_3$ nanocomposites were prepared using the melt blending method. The effects of nano-$CaCO_3$ content on the thermal behaviors, such as cure behavior, glass transition temperature ($T_g$), thermal stability, and the coefficient of thermal extension (CTE), were investigated by several techniques. Differential scanning calorimetry (DSC) results indicated that the cure reaction of the TGPAP epoxy resin was accelerated with the addition of nano-$CaCO_3$. When the nano-$CaCO_3$ content was increased, the $T_g$ of the TGPAP/$CaCO_3$ nanocomposites did not obviously change, whereas the crosslinking density was linearly increased. The nanocomposites showed a higher thermal stability than that of the neat epoxy resin. This result could be attributed to the increased surface contact area between the nano-$CaCO_3$ particles and the epoxy matrix, as well as the high crosslinking density in the TGPAP/$CaCO_3$ nanocomposites. The CTE of the nanocomposites in the rubbery region was significantly decreased as the nano-$CaCO_3$ content was increased.

• Carbon letters
• /
• v.21
• /
• pp.1-7
• /
• 2017

The effects of ammonia-treated graphene oxide (GO) on composites based on epoxy resin were investigated. Ammonia solutions of different concentrations (14-28%) were used to modify GO. Nitrogen functional groups were introduced on the GO surfaces without significant structural changes. The ammonia-treated GO-based epoxy composites exhibited interesting changes in their mechanical properties related to the presence of nitrogen functional groups, particularly amine ($C-NH_2$) groups on the GO surfaces. The highest tensile and impact strength values were 42.1 MPa and 12.3 J/m, respectively, which were observed in an epoxy composite prepared with GO treated with a 28% ammonia solution. This improved tensile strength was 2.2 and 1.3 times higher than those of the neat epoxy and the non-treated GO-based epoxy composite, respectively. The amine groups on the GO ensure its participation in the cross-linking reaction of the epoxy resin under amine curing agent condition and enhance its interfacial bonding with the epoxy resin.

• Membrane and Water Treatment
• /
• v.6 no.4
• /
• pp.309-321
• /
• 2015

We report in this study the synthesis of mixed matrix reverse osmosis membranes by interfacial polymerization (IP) of thin film nanocomposite (TFNC) on porous polysulfone supports (PS). This paper investigates the synthesis of ZnO nanoparticles (NPs) using the sol-gel processing technique and evaluates the performance of mixed matrix membranes reached by these aerogel NPs. Aqueous m-phenyl diamine (MPD) and organic trimesoyl chloride (TMC)-NPs mixture solutions were used in the IP process. The reaction of MPD and TMC at the interface of PS substrates resulted in the formation of the thin film composite (TFC). NPs of ZnO with a size of about 25 nm were used for the fabrication of the TFNC membranes. These membranes were characterized and evaluated in comparison with neat TFC ones. Their performances were evaluated based on the water permeability and salt rejection. Experimental results indicated that the NPs improved membrane performance under optimal concentration of NPs. By changing the content of the filler, better hydrophilicity was obtained; the contact angle was decreased from $74^{\circ}$ to $32^{\circ}$. Also, the permeate water flux was increased from 26 to 49 L/m2.h when the content of NPs is 0.1 (wt.%) with the maintaining of lower salt passage of 1%.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1046-1051
• /
• 1999

Cure behavior and thermal stability of the different ratio of diglycidylether of bisphenol A(DGEBA)/trimethylolpropane triglycidylether(TMP) epoxy blends initiated by 1 wt % N-benzylpyrazinium hexafluoroantimonate (BPH) as a cationic latent catalyst were studied using DSC and TGA, respectively. Latent properties were performed by measurement of the conversion as a function of temperature using dynamic DSC. Dynamic DSC thermograms of DGEBA/TMP blends revealed that the weak peak was formed by complex formation between the hydroxyl groups in DGEBA and BPH, and between epoxides and BPH in low temperature ranges. The strong peak was considered as an exothermic reaction by the formation of three-dimensional network in high temperature ranges. Isothermal DSC revealed that the reaction rate of the blends was found to be higher than that of the neat TMP. The thermal stabilities in the cured resins were increased with increasing the DGEBA content. These results could be interpreted in terms of the stable aromatic structure, existence of hydroxyl group and high molecular weight of DGEBA.

• Polymer(Korea)
• /
• v.26 no.5
• /
• pp.599-606
• /
• 2002

In this study, 4,4'-tetraglycidyl diaminodiphenyl methane (TGDDM)/polyamideimide (PAI) blends were cured using diaminodiphenyl sulfone (DDS). And the effect of addition of different PAI contents to neat TGDDM was investigated in the thermal, mechanical, and morphological properties of the blends. The cure behavior and thermal stability of the cured specimens were monitored by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Also, the critical stress intensity factor (K$\_$IC/) was measured in UTM, and the phase separation behavior and final morphology of TGDDM/PAI blends were examined in scanning electron microscopy(SEM). As a result, the cure temperature and cure activation energy (E$\_$a/) were decreased with increasing the PAI content. The decreasing of cure temperature and cure activation energy were probably due to the presence of secondary amine group of PAI backbone used as co-initiator. But, the decomposition activation energy (E$\_$t/) and K$\_$IC/ value were increased up to 5. 10 phr of PAI content, respectively and they were decreased above the PAI contents. These results were explained on the basis of chain scission reaction by etherification. And morphology of blends observed from SEM was confirmed in co-continuous structures.

• Composites Research
• /
• v.31 no.2
• /
• pp.63-68
• /
• 2018

Thermoplastic composite has been limitedly used in high performance aerospace industry due to relatively low mechanical properties even though it has various advantages. But, thermoplastic aromatic polymer composite has recently been researched and utilized much. In this study, PEEK and PPS neat resin film as representative thermoplastic aromatic polymer were processed through continuous heating, cooling and reheating cycle. Property change such as glass transition temperature and melting temperature were identified and crystallinity variation by different cooling rate were evaluated. In the first (heating) run, polymer specimens were kept for 5 minutes at higher temperature than melting point to remove previous thermal history, and crystallization reaction was controlled by adjusting cooling rate to 2, 5, 10, 20 and $40^{\circ}C/minute$ in the second (cooling) run. In the third (heating) run, specimen crystallinity were verified by measuring the melting enthalpy. The initial specimens containing high portion of amorphous structure exhibited cold crystallization and clear glass transition in the first run whereas they did not show in the third run due to the increase of crystalline structure portion. As cooling rate decreases through the second cooling run, the crystallinity of the specimen increased. PEEK polymer had 21.9~39.3% crystallinity depending on cooling rate change whereas PPS polymer showed 29.1~31.2%.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.593-602
• /
• 2013

Biodiesel is an important new alternative transportation fuel and it can be produced by chemically reacting a fat or oil with an alcohol, in the presence of a catalyst. The product of the reaction is a mixture of methyl esters, which are known as biodiesel, and glycerol, which is a high value co-product. The process is known as transesterification. Biodiesel can be used neat and when used as a pure fuel it is known as BD100. However, it is often blended with petroleum-based diesel fuel and when this is done the blend is designated BD5 or BD20(BD20 is a blend of 20% biodiesel and 80% petroleum diesel fuel). Adherence to a quality standard is essential for proper performance of the fuel in the engine and will be necessary for widespread use of biodiesel. In this study, we analyzed 4,144 papers of biodiesel by category, country, institution, keyword etc. from 2001 to 2013 years.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.145-153
• /
• 2015

$Cr_2O_3/AP$ (ammonium perchlorate) energetic composites were prepared by a method of solvent/anti-solvent. XRD analysis revealed that the crystalline structure of AP in $Cr_2O_3/AP$ composites is the same as that of pure AP. SEM photomicrograph shows that an average size of cuboid $Cr_2O_3/AP$ composites is approximately $2.5{\mu}m$. TGA analysis shows that the addition of submicron $Cr_2O_3$ particles into AP lowers the HTD (high-temperature decomposition) compared to that of neat AP and the activation energy of the $Cr_2O_3/AP$ composites was calculated by the isoconversional Starlink method. Considering changes in the activation energy, the decomposition reaction mechanism of AP was suggested as follows; the decomposition with the formation of nucleation sites renders formation of porous structure in the composites up to conversion of about 0.25 and after further conversion of over 0.3, it seems that decomposition reaction vigorously takes place rather than sublimation of AP.