• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.125-134
• /
• 2009

Recently, as IT technology and the ubiquitous environment have diffused, the application of these techniques are being attempted in the field of traffic operations and management. Therefore, it is necessary to develop data collection systems and signal control strategies that are suitable in the ubiquitous environment and that will improve efficiency and safety of signalized intersections. The authors conducted a study on the Wireless Sensor Network (WSN) signal control strategy using a wireless communication network between individual vehicles and a signal-control system and full actuated signal control technique to propose a new signal control strategy in the ubiquitous environment. The WSN was defined to evaluate the algorithm used with PARAMICS API simulation. The simulation produced results that the WSN signal control is more effective than other signal control methods. The WSN signal control could reduce vehicle delay time to a maximum of 64% in comparison with other signal control methods in low and near saturation flow conditions.

• KIISE Transactions on Computing Practices
• /
• v.21 no.4
• /
• pp.283-289
• /
• 2015

We propose a low cost attendance checking system using NFC (Near Field Communication) and show a case study of an actual operation of the system in a higher education institute. The system offers a direct attendance check service when a student touches NFC tag on a classroom desk with his/her own smartphone. Our service was first developed and operated in 2012, and then additional functions like massive real time processing were reinforced. In the fall semester, 58 courses use the service and 96% of the class attendance was checked with mobile devices. The only hardware requirement of the system was NFC tag on the classroom desk, which reduced hardware cost dramatically. However, it also minimized attendance checking time into 1 minute regardless of enrolled student number.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1615-1622
• /
• 2008

We have fabricated the poly-silicon thin film transistor(TFT) which has the LDD-region with graded spacer. The devices of n-channel poly-si TFT's hydrogenated by $H_2$ and $H_2$/plasma processes were fabricated for the devices reliability. We have biased the devices under the gate voltage stress conditions of maximum leakage current. The parametric characteristics caused by gate voltage stress conditions in hydrogenated devices are investigated by measuring/analyzing the drain current, leakage current, threshold voltage($V_{th}$), sub-threshold slope(S) and transconductance($G_m$) values. As a analyzed results of characteristics parameters, the degradation characteristics in hydrogenated n-channel polysilicon TFT's are mainly caused by the enhancement of dangling bonds at the poly-Si/$SiO_2$ interface and the poly-Si grain boundary due to dissolution of Si-H bonds. The structure of novel proposed poly-Si TFT's are the simplicities of the fabrication process steps and the decrease of leakage current by reduced lateral electric field near the drain region.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.790-791
• /
• 2016

The system used in the laboratory of chemistry and medical is management only by measuring the temperature inside the reagent management within and recording in handwriting. When you hold the reagent, it can not recognize in real time the problems that occur in the interior, an accident occurs. you can not find a use record reagent storage, a problem with the management of an efficient reagent can be generated. In this paper, we propose a reagent management system that leverages the embedded boards and sensors in the laboratory reagents effectively manage to resolve it. As a result, Converting the information of the reagent to the data using the NFC, the administrator can identify the reagent user to register and manage hazardous reagents. Converted by using the NFC information of the reagent to the data, the administrator can identify the reagent user to register and manage hazardous reagents, temperature, humidity, so that it can be controlled by utilizing the VOC sensor to. Also it is passes the message to the administrator in the event of a particular risk situation. This is believed to enable the effective administration in a laboratory reagent.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.40.1-40.1
• /
• 2017

The NISS (Near-infrared Imaging Spectrometer for Star formation history) is the near-infrared spectro-photometric instrument optimized to the Next Generation of small satellite series (NEXTSat). To achieve the major scientific objectives for the study of the cosmic star formation in local and distant universe, the spectro-photometric survey covering more than 100 square degree will be performed. The main observational targets will be nearby galaxies, galaxy clusters, star-forming regions and low background regions. The off-axis optics was developed to cover a wide field of view ($2deg.{\times}2deg.$) as well as the wide wavelength range from 0.95 to $2.5{\mu}m$, which were revised based upon the recent test and evaluation of the NISS instrument. The mechanical structure were tested under the launching condition as well as the space environment. The signal processing from infrared sensor and the communication with the satellite were evaluated after the integration into the satellite. The flight model of the NSS was assembled and integrated into the satellite. To verify operations of the satellite in space, the space environment tests such as the vibration, shock and thermal-vacuum test were performed. The accurate calibration data were obtained in our test facilities. Here, we report the test results of the flight model of the NISS.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.293-294
• /
• 2011

It is known that semiconductor quantum-dot (QD) heterostructures have superior zero-dimensional quantum confinement, and they have been successfully applied to semiconductor laser diodes (QDLDs) for optical communication and infrared photodetectors (QDIPs) for thermal images [1]. The self-assembled QDs are normally formed at Stranski-Krastanov (S-K) growth mode utilizing the accumulated strain due to lattice-mismatch existing at heterointerfaces between QDs and cap layers. In order to increase the areal density and the number of stacks of QDs, recently, sub-monolayer (SML)-thick QDs (SQDs) with reduced strain were tried by equivalent thicknesses thinner than a wetting layer (WL) existing in conventional QDs (CQDs) by S-K mode. Despite that it is very different from CQDs with a well-defined WL, the SQD structure has been successfully applied to QDIP[2]. In this study, optical characteristics are investigated by using photoluminescence (PL) spectra taken from self-assembled InAs/GaAs QDs whose coverage are changing from submonolayer to a few monolayers. The QD structures were grown by using molecular beam epitaxy (MBE) on semi-insulating GaAs (100) substrates, and formed at a substrate temperature of 480$^{\circ}C$ followed by covering GaAs cap layer at 590$^{\circ}C$. We prepared six 10-period-stacked QD samples with different InAs coverages and thicknesses of GaAs spacer layers. In the QD coverage below WL thickness (~1.7 ML), the majority of SQDs with no WL coexisted with a small amount of CQDs with a WL, and multi-peak spectra changed to a single peak profile. A transition from SQDs to CQDs was found before and after a WL formation, and the sublevel of SQDs peaking at (1.32${\pm}$0.1) eV was much closer to the GaAs bandedge than that of CQDs (~1.2 eV). These revealed that QDs with no WL could be formed by near-ML coverage in InAs/GaAs system, and single-mode SQDs could be achieved by 1.5 ML just below WL that a strain field was entirely uniform.

• Publications of The Korean Astronomical Society
• /
• v.21 no.2
• /
• pp.67-74
• /
• 2006

We have developed a control electronics system for an infrared detector array of KASINICS (KASI Near Infrared Camera System), which is a new ground-based instrument of the Korea Astronomy and Space science Institute (KASI). Equipped with a $512{\times}512$ InSb array (ALADDIN III Quadrant, manufactured by Raytheon) sensitive from 1 to $5{\mu}m$, KASINICS will be used at J, H, Ks, and L-bands. The controller consists of DSP(Digital Signal Processor), Bias, Clock, and Video boards which are installed on a single VME-bus backplane. TMS320C6713DSP, FPGA(Field Programmable Gate Array), and 384-MB SDRAM(Synchronous Dynamic Random Access Memory) are included in the DSP board. DSP board manages entire electronics system, generates digital clock patterns and communicates with a PC using USB 2.0 interface. The clock patterns are downloaded from a PC and stored on the FPGA. UART is used for the communication with peripherals. Video board has 4 channel ADC which converts video signal into 16-bit digital numbers. Two video boards are installed on the controller for ALADDIN array. The Bias board provides 16 dc bias voltages and the Clock board has 15 clock channels. We have also coded a DSP firmware and a test version of control software in C-language. The controller is flexible enough to operate a wide range of IR array and CCD. Operational tests of the controller have been successfully finished using a test ROIC (Read-Out Integrated Circuit).

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1022-1027
• /
• 2003

The Motion controllers provide the sophisticated performance and enhanced capabilities we can see in the movements of robotic systems. Several types of motion controllers are available, some based on the kind of overall control system in use. PLC (Programmable Logic Controller)-based motion controllers still predominate. The many peoples use MCU (Micro Controller Unit)-based board level motion controllers and will continue to in the near-term future. These motion controllers control a variety motor system like robotic systems. Generally, They consist of large and complex circuits. PLC-based motion controller consists of high performance PLC, development tool, and application specific software. It can be cause to generate several problems that are large size and space, much cabling, and additional high coasts. MCU-based motion controller consists of memories like ROM and RAM, I/O interface ports, and decoder in order to operate MCU. Additionally, it needs DPRAM to communicate with host PC, counter to get position information of motor by using encoder signal, additional circuits to control servo, and application specific software to generate a various velocity profiles. It can be causes to generate several problems that are overall system complexity, large size and space, much cabling, large power consumption and additional high costs. Also, it needs much times to calculate velocity profile because of generating by software method and don't generate various velocity profiles like arbitrary velocity profile. Therefore, It is hard to generate expected various velocity profiles. And further, to embed real-time OS (Operating System) is considered for more reliable motion control. In this paper, the structure of chip-based precision motion controller is proposed to solve above-mentioned problems of control systems. This proposed motion controller is designed with a FPGA (Field Programmable Gate Arrays) by using the VHDL (Very high speed integrated circuit Hardware Description Language) and Handel-C that is program language for deign hardware. This motion controller consists of Velocity Profile Generator (VPG) part to generate expected various velocity profiles, PCI Interface part to communicate with host PC, Feedback Counter part to get position information by using encoder signal, Clock Generator to generate expected various clock signal, Controller part to control position of motor with generated velocity profile and position information, and Data Converter part to convert and transmit compatible data to D/A converter.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.19
• /
• pp.191-223
• /
• 2003

Electronic commerce and the Internet offer unprecedented opportunities. The explosive expansion of the use of the Internet makes it possible for businesses to expand their markets and render services. Global transaction costs are easy to cut off using Internet and transaction speed is faster than before. Where cyberspace is not free from claims, Offline transaction can lead to problems and disputes the same is for cyberspace transactions. However ADR is not meet for the online transaction for speed, cost and open network system, ODR methods to resolve electronic commerce conflicts is crucial for building confidence and permitting access to justice in an online business environment. The use of the Internet and the network in dispute resolution has an impact on the types of communication implied in the relevant processes such as automated negotiation, online mediation and online arbitration and involves new technological issues such as the integrity and confidentiality of data and communication used to transmit and store data. Among the ODR systems Online Arbitration is currently binding both parties disputed and can achieve the aim of dispute award the same as the traditional arbitration. Arbitration is based on the New York Convention 1958, Arbitration Model law 1985 and national Arbitration Act that are founded on territorial area and rested on arbitration agreement, constitution of the arbitral tribunal, due process, final and binding award and enforcement of the arbitration award. To compare with this issues Online arbitration has unnecessarily legal unstability and risk. ODR is the burgeoning field and has created a new issues. All such issues which have been debated in the ADR are composed with ODR. But these are not limited Some of issues are further complicated by the nature of the online environment such as confidentiality and principle of parties. It is true that online arbitration should comply with legal provisions, but which is impossible to adhere of the law. Flexible translation and functional equivalence of legal provisions are needed for acceptance of electronic commerce disputes. Finally electronic commerce now takes place on the Internet, it is inevitable that the commercial world wants access to dispute resolution process that best suits the new commercial environment. ODR methods are processing for development and legal issues are considered by both national and international authorities. Introduction of new Conventions or amend Convention and Model law of ODR comes near.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.375-384
• /
• 2021

The development of the European Railway Traffic Management System (ERTMS) began in 1989 as part of the European Union policy to establish a unified and interoperable railway route in Europe. It is a trend that ERTMS/ETCS(European Train Control System) is becoming an international standard in the railway signaling system. As the solution to this situation, the domestic railway signaling field is also at a time when it is more necessary to develop the technology of the train control system considering interoperability. The European Railway Agency (ERA) has proposed B3R2 (Baseline 3 Release 2) for new ETCS-equipped trains after 2020.12.31. In Korea, Baseline 2.2.0 to 2.3.0d on Gyeongbu Line, Honam Line, Jeolla Line, and Gyeongchun Line was installed and now is under operating. As the Baseline upgrade continues, technical considerations and economic considerations are an occurring trend. In this paper, we analyzed the main functions and compatibility of the currently distributed European standard ERTMS/ETCS Baseline 3 and presented a plan to apply the domestic KTCS(Korean Train Control System) Baseline in the near future.