• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.157-164
• /
• 2015

The present work performs three-dimensional flow calculations based on Reynolds Averaged Navier-Stokes (RANS) and Delayed Detached Eddy Simulation (DDES) to investigate the flow field of a transonic rotor (NASA Rotor 37) at near-stall condition. It is found that the DES approach is likely to predict well the complex flow characteristics such as secondary vortex or turbulent flow phenomenon than RANS approach, which is useful to describe the flow mechanism of a transonic compressor. Especially, the DES results show improvement of predicting the flow field in the wake region and the model captures reasonably well separated regions compared to the RANS model. Besides, it is discovered that the three-dimensional vortical flows after the vortex breakdown from the rotor tip region are widely distributed and its vortex structures are clearly present. Near the rotor leading edge, a part of the tip leakage flows in DES solution spill over into next passage of the blade owing to the separation vortex flow and the backflow is clearly seen around the trailing edge of rotor tip. Furthermore, the DES solution shows strong turbulent eddies especially in the rotor hub, rotor tip section and the downstream of rotor trailing edge compared to the RANS solution.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.1-11
• /
• 2004

An experimental study was carried out to investigate the influence of flow conditions of a boundary layer on the near-wake of a flat plate. Various attaching positions of tripping wires were selected to change flow conditions on a boundary layer. Laminar, transitional, and turbulent boundary layer conditions at 0.98C from the leading edge are imposed to investigate the evolution of symmetric and asymmetric wake. An x-type hot-wire probe(55P61) is employed to measure at 8 stations of the near-wake region. Measured mean velocity distributions are presented in terms of similarity parameter. It is found that the symmetric wake collapses well to the universal profile in the central part of the wake. However, the universal profile is not suitable in describing an asymmetric wake.

• Publications of The Korean Astronomical Society
• /
• v.32 no.1
• /
• pp.327-329
• /
• 2017

We report a spatial fluctuation analysis of the sky brightness in the near-infrared from observations towards the north ecliptic pole (NEP) by AKARI at 2.4 and $3.2{\mu}m$. As a follow up study of our previous work on the Monitor field of AKARI, we used NEP deep survey data, which covered a circular area of about 0.4 square degrees, in order to extend fluctuation analysis at angular scales up to 1000". After pre-processing, additional correction procedures were done to correct time varying components and instrumental effects such as MUXbleed. To remove resolved objects, we applied $2{\sigma}$ clipping and point spread function (PSF) subtraction. We finally obtained mosaicked images which can be used for the study of various diffuse emissions in the near-infrared sky and found that there are spatial structures in the mosaicked images using a power spectrum analysis.

• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1424-1433
• /
• 2018

This paper presents a novel space vector pulse-width modulation (SVPWM) to synthesize an arbitrary non-sinusoidal phase voltage. The key of the proposed method is that the switching vectors used to comprise the reference vectors in the ${\alpha}_1-{\beta}_1$ frame and the ${\alpha}_3-{\beta}_3$ frame are decoupled. In the ${\alpha}_1-{\beta}_1$ frame, the reference vector is comprised by near two large vectors. The corresponding vector comprised by the two vectors in the ${\alpha}_3-{\beta}_3$ frame is considered as a disturbance, which is restrained by close-loop control. In the ${\alpha}_3-{\beta}_3$ frame, there are two methods to comprise the reference vector. Method I is a near two middle vectors method. Method II uses near four vectors (two middle and two little vectors). The proposed SVPWM using decoupled switching vectors can guarantee a maximum modulation index in the ${\alpha}_1-{\beta}_1$ frame. The effectiveness of the proposed method is verified by simulated and experimental results under various operation conditions.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.68-68
• /
• 2017

Measurements of solar wind speed near the Sun (< 0.1 AU) are important for understanding acceleration mechanism of solar wind as well as space weather predictions, but hard to directly measure them. For the first time, we provide 2D solar wind speed maps in the LASCO field of view using three consecutive days data. By applying the Fourier convolution and inverse Fourier transform, we decompose the 3D intensity data (r, PA, t) into the 4D one (r, PA, t, v). Then, we take the weighted mean along speed to determine the solar wind speeds that gives V(r, PA, t) in every 30 min. The estimated radial speeds are consistent with those given by an artificial flow and plasma blobs. We find that the estimated speeds are moderately correlated with those from slow CMEs and those from IPS observations. A comparison of yearly solar wind speed maps in 2000 and 2009 shows that they have very remarkable differences: azimuthally uniform distribution in 2000 and bi-modal distribution (high speed near the poles and low speed near the equator) in 2009.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.123-125
• /
• 2007

NGC 1333 is a nearby star forming region, and IRAS 4A and IRAS 4BI are low-mass Class 0 protostars. IRAS 4A is a protobinary system. The NGC 1333 IRAS 4 region was observed in the 22 GHz water maser with a high resolution (0.08") using the Very Large Array. Two groups of masers were detected: one near A2 and the other near BI. Most of the masers associated with A2 are located very close (< 100 AU) to the radio continuum source. They may be associated with the circumstellar disk. Since no maser was detected near AI, the A2 disk is relatively more active than the Al disk. Most of the masers in the BI region are distributed along a straight line, and they are probably related with the outflow. As in many other water maser sources, the IRAS 4 water masers seem to trace selectively either the disk or the outflow. Considering the outflow lifetimes, the disk-outflow dichotomy is probably unrelated with the evolutionary stage of protostars. A possible explanation may be that both the outflow-maser and the disk-maser are rare phenomena and that detecting both kinds of maser around a single protostar may be even rarer.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.38.2-38.2
• /
• 2017

We present the observational study toward the multiple outflows around $LkH{\alpha}$ 234 star formation region. The high-resolution, near-IR spectral mapping using the Immersion Grating Infrared Spectrograph (IGRINS) allowed us to distinguish at least four separate outflows with the molecular hydrogen ($H_2$) and forbidden iron ([Fe II]) emission lines. The outflow associated with the radio continuum source VLA 3B is detected in both H2 and [Fe II] emission, while the outflows driven by MM 1, VLA 2 sources were only detected in $H_2$, indicating the different physical conditions of outflows. We confirm the axis of VLA 3B jet, the position angle of ${\sim}240^{\circ}$. We firstly identified the redshifted, near-IR H2 outflow associated with VLA 2, which is coincident with the previous detections of $H_2O$ masers. From the $H_2$ line ratios, we interpret the gas properties of the shock excited blue- and redshifted components, and UV excited surrounding photodissociation region. We also discuss the origin of the high-velocity (|VLSR| > $150km\;s^{-1}$) $H_2$ emission.

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.181-188
• /
• 2000

DO Cas is a short period (P=0.68day) eclipsing binary star and is classified as a near-contact binary by Shaw(1990). There is no published radial velocity curve for this short period binary after Mannino(1958). Hill(1991) suspected that Mannino's radial velocity curve had some serious mistake. So, we scanned the original plates used by Mannino with PDS and the spectra were employed to IRAF packages to estimate the radial velocities. The radial velocity curve and the BVR light curves made by us in 1998 were analyzed simultaneously with Wilson-Devinney code. We found that DO Cas is a contact or near-contact binary which the primary component fills its Roche lobe and we also estimated the absolute dimensions of each components of this system.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.29.4-30
• /
• 2009

Extra-tidal feature of the globular clusters such as tidal tails and halos can be a crucial evidence of the merging scenario of the Galaxy formation in the dynamical point of view. To search for such an extra-tidal feature of globular clusters located in the Galactic bulge(RGC<3kpc), we obtained wide-field near-infrared JHKs images of 6 metal-poor ([Fe/H]<-1.0) clusters and 3 metal-rich ([Fe/H]>-1.0) clusters. Observations were carried out using IRSF 1.4m telescope and SIRIUS near-infrared camera, during 2006~2007. The obtained images have a total maximum field-of-view of ~ $21'\times 21'$. To select clusters' member stars and minimize the field star contaminations, we applied CMD masking algorithm. Smoothed surface density contour maps with selected stars for each cluster show overdensity features around the tidal radius and beyond. Also, radial surface density profiles within the tidal radius of the clusters show an overdensity feature as a change of slope of the radial profile. The results add further observational constraints of the formation of the Galactic bulge.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.143.1-143.1
• /
• 2012

We attempt to investigate the main reason of the asymmetrical light curves of contact and near-contact eclipsing binary base on the hypothesis that cool spot was produced on late type star while hot spot was produced from transferred material from their companion star hitting surface. We select 7 eclipsing binary systems which showed asymmetric light curves and mass transfer. Period variation and mass transfer rate were obtained from O-C diagram. Radial velocity curves and light curves of those 7 eclipsing binary system were adopted from available literature in order to obtain the absolute dimension. For four contact eclipsing binary system (AD Phe, EZ Hya, AG Vir and VW Boo), their component stars belonged to spectral type G to K was fitted by cool spot model. While the other two near-contact systems (RT Scl and V1010 Oph) and one contact system (SV Cen) was fitted by cool spot model. The densities of the materials are adopted from stellar model which calculate by stellar structure code. The calculated spot temperature turns out to agree with the photometric solution but there are no correlate between period variation rate and type of spot.