• Journal of Astronomy and Space Sciences
• /
• v.16 no.2
• /
• pp.209-216
• /
• 1999

Light curves of two near-contact binaries DO Cas and SW Lyn are analyzed to investigate their Roche configurations. We made new BVR observations for DO Cas and employed the published observation data for SW Lyn. Our four night observations for DO Cas were secured over 8 days so that the contamination by the intrinsic light variation is minimized. Based on the WD model, we found that DO Cas could be classified as a near-contact binary, while SW Lyn is better described by semi-detached configuration. Furthermore it is also possible to classify DO Cas as a contact binary. It appears that there are ambiguities in the class of near-contact configuration, and further observations and re-analysis are required to establish the near-contact nature of binary systems.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.406-410
• /
• 2003

B. M. Schein([1]) considered systems of the form (${\Phi}$; ${\circ}$,-), where ${\Phi}$ is a set of functions closed under the composition "${\circ}$" of functions and the set theoretic subtraction "-". In this structure, (${\Phi}$; ${\circ}$) is a function semigroup and (${\Phi}$;-) is a subtraction algebra in the sense of [1]. He proved that every subtraction semigroup is isomorphic to a difference semigroup of invertible functions. Also this structure is closely related to the mathematical logic, Boolean algebra, Bck-algera, etc. In this paper, we define the near subtraction semigroup as a generalization of the subtraction semigroup, and define the notions of strong for it, and then we will search the general properties of this structure, the properties of ideals, and the application of it.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.746-750
• /
• 2003

Using the Czochralski method, Er$_2$O$_3$ doped near stoichiometric LiNbO$_3$ single crystals were grown 15~20 mm in diameter and 30-35 mm in length for Z-axis. Lattice constants were inspected by the X-Ray Diffractometer (XRD) and through Fourier Transform-Infrared Spectrophotometer (FT-IR), it observed absorption band. Also, the distributions of Er concentration were confirmed by the Electron Probe Micro Analysis (EPMA).

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.510-513
• /
• 2018

Recently, EMC (electromagnetic compatibility) becomes very important, which demands the measurement of EMI (electromagnetic interference) in the chip level. NFS (near-field scanning) systems defined in IEC 61967 and IEC 62508 are typical methods to analyze EMI in the chip level. As chips becomes faster, frequency measurement of NFS system should become wideband, but it degrades SNR (singal-to-noise ratio) of the NFP (near-field probe). This paper surveys SNR enhancement technologies of the NFS while maintaining wideband characteristics.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.320-325
• /
• 2010

A multiphase CFD analysis is performed to investigate the effect of near-wall grid for simulating a subcooled boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and vapor(steam) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit ($y_{w}^{+}$) was examined from 64 to 172 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y_{w}^{+}$ > 100.

• Journal of computational fluids engineering
• /
• v.15 no.3
• /
• pp.24-31
• /
• 2010

boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and gas(vapour) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit for lqiuid phase ($y^+_{w,l}$) was examined from 101 to 313 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y^+_{w,l}$ > 300 at the tube exit.

• Journal of Mechanical Science and Technology
• /
• v.15 no.12
• /
• pp.1784-1793
• /
• 2001

The flow fields around an elliptic cylinder of axis ratio AR=2 adjacent to a free surface were investigated experimentally using a water channel. The main objective is to understand the effect of the free surface on the flow structure in the near-wake. The flow fields were measured by varying the depth of cylinder submergence, for each experimental condition, 350 velocity fields were measured using a single-frame PIV system and ensemble-averaged to obtain the spatial distribution of turbulent statics. For small submergence depths a large-scale eddy structure was observed in the near-wake, causing a reverse flow near the free surface, downstream of the cylinder. As the depth of cylinder submergence was increased, the flow speed in the gap region between the upper surface of the cylinder and the free surface increased and formed a substantial jet flow. The general flow structure of the elliptic cylinder is similar to previous results for a circular cylinder submerged near to a free surface. However, the width of the wake and the angle of downward deflection of the shear layer developed from the lower surface of the elliptic cylinder are smaller tan those for a circular cylinder.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.11
• /
• pp.2732-2741
• /
• 2000

Combination of magnetic recording technology and optical recording technology such as Near Field Optical Recording is watched recently. In order to accomplish this technology, the development of an electromagnetic driven mm-sized mirror shifting laser beam in track direction have to needed. In Near Field Optical Recording System, shifting laser beam in track direction mean as fine tracking and means as coarse tracking. Therefore in Near Field Optical Recording, 2-stage actuator is composed of servo controller in reading or recording information on disc layer. In our research, through design and simulation process of driven mm-sized mirror, we arrange systematically design process of driven mm-sized mirror having good frequency transfer characteristics. Design and simulation processes included modal analysis of spring, calculation of magnetic moment according to the number of turns and geometric configuration of coil and magnetic circuit analysis meaning that calculation of magnetic flux density in air gap of magnetic circuit. After that we design and make parts of driven mm-sized mirror, assemble and evaluate our electriomagnetic driven mm-sized mirror. we compared design values with actual characteristic values and present solution scheme. Through these processes we performed manufacturing of an electromagnetic driven mm-sized mirror having good frequency-domain characteristics and high sensitivity characteristics.

• 한국해양학회지
• /
• v.16 no.1
• /
• pp.12-23
• /
• 1981

A numerical experiment is made in order to clarify the mechanism of the upwelling phenomenon along the coast near the poleward edge of the western boundary current. The possibility of the upwelling is suggested from the analysis of the observational data in the east of Honshu, Japan, and in the south eastern coast of Korean Peninsula. This upwelling phenomenon is very deep and can be traced to the bottom layer. The upwelling phenomenon seems to be a general oceanic feature which characterizes the region along the west coast near the poleward edge of the western boundary current. This experiment is simulating the oceanic condition of the transition region between Kuroshio front and the Oyashio front in the east of Honshu, Japan. The possible explanations of the causes of the upwelling are as follows;In the interior of the modeled ocean the cold heavy water supplied from the north and the warm light water from the south make the north-south gradient of the pressure field and accelerate the eastward current to produce the h-orizontal divergence feld near the west coast. The divergence is compensated by the upwelling near the separation region. Another one is that the upwell-ed cold water strengthen constantly the pressure gradient which is balanced by the northward current and is weakened by the horizontal diffusion.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.366-372
• /
• 2020

Using several accessible published data sets, we analyzed the temporal change of ¹³⁷Cs radioactivity (per unit mass of sample) in marine sediments and investigated the effect of the water content of sediment on the ¹³⁷Cs radioactivity, to understand the behavior of ¹³⁷Cs present in marine environments. The ¹³⁷Cs radioactivity in sediments decreased more slowly in the Baltic Sea (near the Chernobyl nuclear power plant) than in the ocean near the Fukushima Daiichi nuclear power plant (FDNPP). The ¹³⁷Cs radioactivity in the sediment near the FDNPP tended to increase as the water content increased, and the water content decreased at certain sampling sites near the FDNPP for several years. Additionally, the decrease in the water content contributed to 51.2% of the average ¹³⁷Cs radioactivity decrease rate for the same period. Thus, it may be necessary to monitor both the ¹³⁷Cs radioactivity and the water content for marine sediments to track the ¹³⁷Cs that was discharged from the sites of Chernobyl and Fukushima nuclear power plants where severe accidents occurred.