• 한국자기학회지
• /
• 제21권4호
• /
• pp.147-150
• /
• 2011

1980년대 초 희토류 자석이 발견된 이래 지난 30년간 희토류 본드 자석은 지속적으로 성장해 왔으며, 그 적용 분야도 보다 다양해 지고 있다. 현재 희토류 본드 자석은 컴퓨터 주변기기, 자동차, 소비 가전, 사무 자동화 분야 등 우리의 일상 생활과 주변에서 광범위하게 사용되고 있다. 하지만, 2010년 하반기부터 시작된 희토류 원료 가격의 급등은 2011년 2사분기 들어 수직 상승에 가까운 전대미문의 폭등세를 보이며 관련 산업에 적지 않은 충격을 가져오고 있다. 이로 인해 그 동안 성능 대비 가격 경쟁력을 바탕으로 페라이트 자석 시장을 꾸준히 잠식하며 양적인 성장과 응용 분야를 확대해 왔던 희토류 본드 자석 업계의 성장방향에 근본적인 변화가 불가피할 것이 분명하며, 향 후 지속 가능한 성장을 위하여 새로운 패러다임 또는 비즈니스 모델의 도입이 반드시 필요하다. 본 글에서는 희토류 본드 자석에 주로 사용되는 희토류 원료의 최근 가격 동향을 간략하게 알아 보고, 희토류 본드 자석의 주요 응용 분야와 희토류 본드 자석용 분말의 개발 동향에 대해서 알아 보았다.

• 청정기술
• /
• 제28권2호
• /
• pp.103-109
• /
• 2022

Nd-Fe-B 폐영구자석 스크랩에는 희토류가 약 20~30% 함유되어 있고 철이 약 60~70% 함유되어 있으며, 황산침출 및 분별결정법을 통하여 희토류 및 철 성분을 회수하고자 하였다. 희토류와 철을 분리·회수하기 위하여 산화배소를 하지 않고 황산농도 및 광액농도비를 변수로 하여 침출특성을 확인하였다. 황산침출은 농도별로 3시간 동안 침출을 진행하였고 침출된 고상을 X-ray diffraction (XRD) 및 XRF (X-ray florescence spectrometry) 분석으로 결정상 및 조성 및 정량적 성분을 확인하였으며, 여액은 ICP 분석을 시행하였다. 3M 황산농도에서 침출했을 경우 네오디뮴 황산화물로 형성되었고 철 성분이 가장 적으며 회수율이 높았다. 남은 여액은 증발농축을 통하여 분별결정법을 하였으며 네오디뮴 성분은 7.0배 농축되었고 철 성분은 2.8배 농축되었다. 본 논문에서 폐영구자석의 산화배소 공정단계 없이 황산침출 및 분별결정법을 통한 희토류 성분의 회수율은 약 99.4%로 확인되었다.

• 한국전기전자재료학회논문지
• /
• 제36권1호
• /
• pp.70-73
• /
• 2023

To improve superconductor properties, the size of the crystal grains of the superconductor should be adjusted, the amount of electricity flowing through the superconductor should be increased, and the superconductor should be designed to withstand external magnetic fields. It is necessary to control the microstructure so that many flux pinning centers are developed inside the superconductor so that defects are generated physically or chemically, and the micro secondary phase for trapped magnetic flux must be dispersed inside the superconductor. In order to measure the superconducting magnetic force of the superconducting bulk in a simplified manner, the superconducting magnetic force was analyzed using an Nd-Fe-B permanent magnet of 3.80 kG. In particular, by delaying the growth of partially melted Y₂BaCuO₅ particles, we devised a plan to refine Y₂BaCuO₅ particles to effectively improve superconducting magnetic force, and analyzed superconducting magnetic force in a single crystal YBa₂Cu₃O_7-y superconducting bulk using a gauss meter. The melted superconducting bulk traps 80% or more of the applied magnetic field, and can be used as a bulk magnet of high magnetic field magnetization applicable to electric power equipment.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.8-15
• /
• 2018

Nd-Fe-B 폐 영구자석으로부터 회수한 염화희토류용액을 PC88A에 의한 경희토류(Pr, Nd)/중희토류(Tb, Dy) 분리정제에 대한 용매추출 연구를 진행하였다. 회분식 실험 단계에서 추출제(PC88A) 농도 0.5 M, 추출 후 평형 pH는 0.8~1.0(feed의 초기 pH 1.3), 세정액(HCl)의 농도는 0.1 M, 탈거액(HCl)의 농도는 2 M 이상일 때 분리 효율이 좋은 것을 확인하였다. 이 결과값을 혼합침강조에 적용하여 초기 조건에서 운용 조건을 변화시키면서 180시간 운용하여 3N급의 경희토류(Pr, Nd)/중희토류(Tb, Dy)금속 이온으로 분리정제 후 회수하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.140-142
• /
• 2006

Cogging torque is often a principal source of vibration, noise and difficulty of control in permanent-magnet brushless DC motors. Cogging torque can be minimized by sinusoidal air-gap flux density waveform because it is produced by the interaction of the rotor magnetic flux and angular variation in the stator magnetic reluctance. Therefore, this paper will present a design method of magnetization system of bonded isotropic neodynium-iron-boron(Nd-Fe-B) magnets in ring type with sinusoidal air-gap flux density distribution and low manufacturing cost. An analytical technique of magnetization makes use of two-dimensional finite element method(2D FEM) and Preisach model that expresses the hysteresis phenomenon of magnetic materials in order for accurate calculation.

• 센서학회지
• /
• 제21권4호
• /
• pp.298-302
• /
• 2012

This paper describes the design and fabrication of a low frequency vibration driven high-efficiency electromagnetic energy harvester based on FR(Flame Resistance)-4 spring which converts mechanical energy into useful electrical power. The fabricated generator consists of a vertically polarized NdFeB permanent magnet attached to the center of spring and a planar type copper coil which has higher efficiency compare with cylindrical type coil. ANSYS finite analysis and Matlab were used to determine the resonance frequency and output power. The generator is capable of producing up to 1.36 $V_{pp}$ at 9 Hz, which has the maximum power of 639 ${\mu}W$ with a load resistance of $3.25k{\Omega}$.

• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.143-147
• /
• 2013

This paper describes a low frequency driven electromagnetic energy harvester (EMEH) which consists of a thin flame resistant (FR-4) planar spring, NdFeB permanent magnets, and a copper coil. The FR-4 spring was fabricated using a desk computer numerical control (CNC) 3D modeling machine. Mathematical modeling and ANSYS finite element analysis (FEA) were used totheoretically investigate the mechanical properties of the spring mass system. The proposed EMEH generates a maximum power of 65.33 ${\mu}W$ at a resonance frequency of 8 Hz with an acceleration of 0.2 g (1 g = 9.8 $m/s^2$) and a superior normalized power density (NPD) of 77 ${\mu}W/cm^3{\cdot}g^2$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.879_880
• /
• 2009

this paper studies the influence of permanent magnet on the vibration of synchronous motor two PM motors with NdFeB and Ferrite magents which have same Back-EMF and output power have been desined. First, the dynamic simulation is performed with these two motors' parameters. The current waveforms can be evaluated. And then based on the equivalent magnetization current principle, the magnetic force density and force including the tangential and radial direction components can be calculated. According to the relationship between the vibration and radial force, the vibration of these two motors can be predicted. This result will give meaningful advice to the motor design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.565-569
• /
• 2002

To improve the driving sensitivity of an optical pickup actuator for high density and high speed drive, we present a new actuator design using multipolar flux-density distribution by magnetic materials and Nd-Fe-B sintered magnets. We expect this actuator to use in 3-axis actuator for tilt compensation as well as conventional 2-axis actuator. The electromagnetic field analysis applying 3-D FEM was performed and several samples were actually tested. From comparing simulated data with experimental results, we verified the accuracy of the simulation and the superiority of the presented method.

• 한국농공학회논문집
• /
• 제49권6호
• /
• pp.87-92
• /
• 2007

Strain-stress behavior of soil is of importance in dealing with geo-techniques which relate to bearing capacity, slope stability, earth pressure and many geo-technical problems. So understanding mechanism of the behavior and reinforcing soil to the required state has been an issue for many years. This paper presents the possibility of magnetic force in enhancing shear strength. To analyze the reinforcing effect, triaxial compression tests were performed on two sets of steel-sand mixtures, one of which is influenced by permanent magnet, NdFeB. With magnetic force under 50 kPa confining pressure, maximum shear strengths increased according to steel percentages but under 100 kPa, no significant changes in maximum shear strengths occurred. Therefore the analysis by Mohr's circles indicates that magnetic force converts the shearing characteristics of sand into those of clay.