• 대한의용생체공학회:의공학회지
• /
• 제10권2호
• /
• pp.94-96
• /
• 1989

Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained.

• 대한치과보철학회지
• /
• 제49권3호
• /
• pp.214-221
• /
• 2011

연구 목적: 기존 대부분의 유한요소 연구에서는 100%의 골-임플란트 접촉을 가정하여 왔으나 인간사체연구(human retrieval study)에서는 골-임플란트 부착비율이 20-80%라고 보고되었다. 본 연구에서는 비선형 삼차원 유한요소법을 이용하여 실제적인 골-임플란트 접촉을 재현하기 위해 무작위 골접촉 양상을 비교연구하고자 하였다. 연구 재료 및 방법: 컴퓨터단층촬영에서 얻은 영상을 근거로 하여 제작한 골모형에 두 가지 디자인의 임플란트(MK III Br${\aa}$nemark$^{(R)}$, Inplant$^{(R)})$를 상악제2소구치에 해당하는 위치에 식립한 모형을 만들었다. 골질은 골형 2로서 Lekholm과 Zarb의 분류를 따랐다. 각 임플란트 디자인마다 두 가지(40%, 70%)의골-임플란트 접촉비율을 가정하였다. 각디자인과 골접촉율마다 5개의 모형을 제작하여 총 40 개의 모형을 만들었다. 이골-임플란트 접촉을 무작위 섞기방식(random shuffle method)으로 하였고 피질골과 해면골을 다 포함하여 골유착을 시킨 군(wholly randomized osseointegration; W)과 피질골과 해면골을 분리하여 골접촉시키기 위해서 각 0.75 mm마다 무작위 골접촉을 시킨 군(segmentally randomized osseointegration; S)을 비교연구하였다. 결과: 골-임플란트 접촉율이나 임플란트 디자인에 상관없이 W군과 S군 간 maximum von Mises strain의 평균에 있어서 유의성 있는 차이가 없었다(P=.939). 골-임플란트 접촉율이40%보다70%가 von Mises strain이 유의하게 낮았다(P=.007). 골-임플란트 접촉율이 40%일때는 Inplant$^{(R)}$과 MK III Br${\aa}$nemark$^{(R)}$의 변형율 간에는 유의성 있는 차이가 없었으나(P=.116), 골-임플란트 접촉율이 70%일때 Inplant$^{(R)}$에서는 $4886{\pm}1034\;{\mu}m/m$, MK III Br${\aa}$nemark$^{(R)}$에서는 $7134{\pm}1232\;{\mu}m/m$로서 Inplant$^{(R)}$의 von Mises strain이MK III Br${\aa}$nemark$^{(R)}$의 것보다 유의하게 낮았다(P<.0001). 결론: 골-임플란트 접촉을 가정함에 있어서 무작위 섞기방식(random shuffle method)을 이용하여 임플란트 전체에 대해서나 피질골과 해면골을 분리하여 무작위 골-임플란트 접촉을 시키든 간에 통계적으로 유의한 차이가 없어서 표본의 크기에 상관없이 둘 다 유효한 방법이라 할 수 있었다.

• 한국안전학회지
• /
• 제7권2호
• /
• pp.63-70
• /
• 1992

흡수식 열펌프에서 폭 넓게 사용되고 있는 대표적인 냉매/흡수용액은 $H_2O$ / LiBr 계이다 그러나, LiBr 수용액의 점성계수는 LiBr의 농도가 커짐에 따라 증가하기 때문에, LiBr수용액의 농용액 영역에서 물질확산계수가 감소한다. 이 결점을 보완하기 위해 흡수용액에 계면활성제를 첨가시키므로서 흡수를 촉진시키는 방식을 이용하고 있다. 계면활성제의 첨가에 의한 흡수용액의 열 및 물질이동 촉진에 관한 연구는 계면활성제 첨가농도에 의해 흡수용액의 표면상에서 게면활성제가 액적으로 존재하는 계면활성제 포화용해도 이상의 조건에서 발생하는 마랑고니대류가 효과적이다. 이 흡수촉진효과는 냉매증기의 흡수시 흡수용액표면상의 분포한 계면활성제와 흡수용액사이의 표면장력차에 기인하는 계면교한 현상에 기인한다. 그러나, 이흡수촉지효과는 냉매증기의 흡수가 일어나는 흡수기 내부의 不안정상태, 즉, 불응축성가스(공기)가 존재하지 않는 조건하에서 이루어지며, 불응축성가스가 흡수촉진저하(열 및 물질이동의 저하)에 기인하는 연구는 보고된 바 없다. 이러한 불응축성가스가 흡수기 내부에 존재할 때 계면교한의 거동 및 열 및 물질이동저하현상을 파악하기 위하여 계면활성제 농도변화(포화용해도 이상 및 이하의 두 조건)에 따른 증기흡수 실험 및 계면교한가시화 실험을 행하였다. 결과적으로 본실험을 통하여 불응축성가스가 수증기흡수에 끼치는 영향을 파악(계면교란의 악화) 첨가시의 흡수량과 不安定상태(불응축성가스가 존재시)의 증기흡수량의 비교에 의해 급격한 증기흡수저하가 不安定상태하에서 발생함으로서 불응축성가스가 흡수촉진효과(계면교한현상)을 저해시키는 결론을 얻었다.es and facts obtained by the expenence in this area, respectively. Both depth-first search and backward chaining schemes are used in reasoning process. This expert system is written in an artificial intelligence language "PROLOG", and its availability is demonstrated through the case study.e함량은 감소되었으며 sulfhydryl기가 증가됨에 따라서 disulfide groups은 감소되는 경향을 보였고 ascorbic acid는 열처리 온도뿐만 아니라 시간과도 관련이 있음을 알 수 있었다. 저온 살균유와 초고온 살균유 사이에서는 지표물질들의 함량이 다소 차이가 있음을 볼 수 있었다.담시간이 구체적으로 기술되지 않았으며, 고유한 언어를 통역하는 과정에서 의미론적 문제에 대한 고려가 부족하였다. 면접과 기록과정에서 보면 자료의 기록과정과 분류 및 분석과정이 명시되어 있지 않았다. 참여관찰과 면접방법을 사용시 이에 대한 자세한 기술이 되어 있지 않았다. 5. 연구결과의 적용 및 이에 대한 논의는 상당히 제한되어 있었는데, 수편의 연구만이 방법론 문제점과 앞으로의 연구분야에 대한 전망을 제시하였으며, 특이한 것은 어 떤 연구자도 이른 개발을 위한 적용 및 임상실무적 차원에서 간호에 대한 제언을 하지 않았다.유모델변수들은 유입-유출 자료들로부터 평가할 수 있으며, 이를 위해서 본 논문에서는 Gauss-Newton 방법을 이용한 Bard

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권6호
• /
• pp.575-579
• /
• 2006

Purpose : The purpose of this study was to evaluate peri-implant bone loss and implant success on anterior maxillary alveolar ridges and Compare Class III and Class IV ridges in the aspect of peri-implant bone loss. Material and Methods : 14 patients (aged 21 to 68, 6males and 8females), who lacked maxillary anterior teeth and were installed from January 2000 to April 2003 at Samsung Medical Center, were selected. The type of implant used included 30 $Br\ddot{a}nemark$ implant. They were taken with digital tomographic and conventional intraoral radiographic examinmation, and were treated with implant installaion without bone augmentation. The peri-implant bone resorption was measured at the mesial and distal aspect of implant on the conventional intraoral radiographs. Results : The study classified the anterior maxillary alveolar ridge and measured peri-implant bone resorption from the period of implant installation to the 2nd year after functional loading radiographically. The study revealed no statistically significant difference between two groups, which was classified by its morphology. The average bone resorption on healing period before loading was 0.18mm and 0.18mm, the 1st year of loading period, 0.77 mm and 0.84mm, and on the 2nd year of loading period, 0.07mm and 0.06mm, respectively on both Class III and class IV. Conclusion : In the knife edge form of anterior maxillary residual ridges(Class IV), implant placement without ridge augmentation does not have significant difference with that of Class III alveolar ridge in the concern of Implant success after 2 year functional loading period in the aspect of peri-implant bone resorption radiographically.

• 분석과학
• /
• 제13권5호
• /
• pp.565-572
• /
• 2000

파장분산형 엑스선분광분석기에 의한 Xe의 전자탐침미세분석시 표준물질에 대해 기술하였다. 실험결과 순수금속 표준시편을 사용할 수 없는 Cs, I, Ba의 표준물질로는 Csl와 $BaCO_3$가 가장 적당한 것으로 나타났다. 빔전류량 10-30 nA에서 Csl, CsBr로부터 측정한 Cs의 엑스선 세기는 빔전류량에 비례하였다. PET 결정 사용시 In-Nd 원소들의 원자번호 대 엑스선 세기간의 직선성은 가속전압 25-30 kV 범위에서 직선회귀 계수 R=0.99 이상의 좋은 상관성을 보였다. 직선회귀식으로 구한 Xe의 엑스선 세기 표준값은 가속전압 25 kV에서 Te의 엑스선 세기 표준값 보다 1.095배 높게 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2384-2389
• /
• 2007

The 2nd order response surface method (RSM) has been carried out to get optimum thermal design for enhanced heat transfer on square channel with bleed holes. The RSM was used as an optimization technique with Reynolds-averaged navier-stokes equation. Turbulence model for heat transfer analysis used RNG k-epsilon model. The wall function used enhanced wall function. Numerical local heat transfer coefficients were similar to the experimental tendency. Two design variables such as attack angle of rib (${\alpha}$), rib pitch-to-rib height ratio (p/e) were chosen. Operation condition considered bleeding ratio per bleed hole ($BR_{hole}$). A response surface were constructed by the design variables and operation condition. As a result, adjusted $R^2$ was more than 0.9. Optimization results of various objective function were similar to heat transfer in channel with and without bleed flow. But friction factor was lower than channel without bleed flow.

• Bulletin of the Korean Chemical Society
• /
• 제32권12호
• /
• pp.4304-4308
• /
• 2011

Kinetic studies of the reactions of O,O-dimethyl Z-S-aryl phosphorothioates with X-benzylamines have been carried out in dimethyl sulfoxide at $85.0^{\circ}C$. The Hammett (log $k_2$ vs ${\sigma}_X$) and Br$\ddot{o}$nsted [log $k_2$ vs $pK_a$(X)] plots for substituent X variations in the nucleophiles are discrete with a break region between 4-Me and H, while the Hammett plots (log $k_2$ vs ${\sigma}_Z$) for substituent Z variations in the leaving groups are linear. The sign of the cross-interaction constant (${\rho}_{XZ}$) is positive for both the strongly and weakly basic nucleophiles. Greater magnitude of ${\rho}_{XZ}$ (= 2.54) value is observed with the weakly basic nucleophiles compared to with the strongly basic nucleophiles (${\rho}_{XZ}$ = 0.17). The deuterium kinetic isotope effects ($k_H/k_D$) involving deuterated benzylamines [$XC_6H_4CH_2ND_2$] are primary normal ($k_H/k_D$ > 1). The proposed mechanism is a stepwise with a rate-limiting leaving group expulsion from the intermediate involving a frontside nucleophilic attack with a hydrogen bonded, four-center-type transition state for both the strongly and weakly basic nucleophiles.

• 한국연초학회지
• /
• 제20권1호
• /
• pp.33-39
• /
• 1998

Survival, growth and reproduction of the cigarette beetle, Lasiodema sewicome F., were studied on flue-cured (NC82), air-cured (Br.21), aromatic (Izmir) tobacco and artificial diet (wheat feed 95% + yeast 5%). Cigarette beetle adults occurred from first generation in the flue-cured and aromatic tobacco, but no adults emerged in air-cured tobacco after the 2nd generations. The head capsule widths of larvae of the cigarette beetles L sewicome F.1 reared on different diets at 2$0^{\circ}C$, $25^{\circ}C$ and 3$0^{\circ}C$ were measured. The head capsule development was slower at 2$0^{\circ}C$ on the same diets than $25^{\circ}C$ and 3$0^{\circ}C$, and slower in the flue-cured and aromatic tobacco than the artificial diet at 2$0^{\circ}C$ and 2S$^{\circ}C$, At $25^{\circ}C$ the larval head capsule developed more rapidly in the aromatic tobacco than the flue-cured tobacco. However, no larval head development was noticed in the air-cured tobacco. The correlation between population densities of cigarette beetle,1 sewicome F., and sugar content of tobacco leaves was positive, but negative in nicotine contents. The regression between densities and sugar content was Y : 22.79 X + 57.29 (r=0.891**), and between nicotine content was Y : -141.31X + 321.40(r=-0.917**).

• 대한간호학회지
• /
• 제42권3호
• /
• pp.385-395
• /
• 2012

Purpose: This purpose of this study was to develop and validate a Self-Efficacy Scale for Self-Management of Breast Cancer (SESSM-B). Methods: The SESSM-B was developed and validated as follows: Item generation, pilot study, and tests of validity and reliability. Twenty-one items were developed through evaluation by 10 experts and 13 items were finally confirmed through item analysis and factor analysis. Psychometric testing was performed with a convenience sample of 303 women with breast cancer. Data were analyzed using factor analysis, Pearson correlation coefficients, and Cronbach's alpha. Results: Five factors evolved from the factor analysis, which explained 69.8% of the total variance. The first factor 'coping with psycho-informational demand' explained 17.2%, 2nd factor 'maintenance of healthy lifestyle' 14.5%. 3rd factor 'management of side-effects' 13.3%, 4th factor 'therapeutic compliance' 12.8%, and 5th factor 'sexual life' 11.9%. SESSM-B also demonstrated a concurrent validity with health-related quality of life scale, EORTC QLQ-C30 & BR23. The internal consistency, Cronbach's alpha, was .78, and reliability of the subscales ranged from .61 to .79. Conclusion: The results of this study suggest that the SESSM-B is an easy, reliable, and valid instrument to measure self-efficacy for self-management of breast cancer.

• 여성건강간호학회지
• /
• 제16권1호
• /
• pp.10-19
• /
• 2010

Purpose: The purpose of this study was to investigate the relationship among family support, stress and quality of life according to the phases of illness in breast cancer patients. Methods: A descriptive correlational study was employed with 121 breast cancer patients. The data was collected by using self reported questionnaire. Self reported data was collected by using the Family support scale, Perceived Stress Scale (PSS), and EORTC QLQ-BR23. Phases of illness consisted 1st phase, 2nd phase, 3rd phase. Results: The score of family supporting, stress and quality of life showed a statically differences according to the phase of illness. Family supporting and stress had negative relation in the first, second and third phase. Family supporting and quality of life in function area had positive relation in the first, second phase. There was no relation between family supporting and quality of life in symptom area. Stress, quality of life in symptom area and quality of life in function area had correlation in the first, third phase. Conclusion: This study suggest that the new nursing implementation should be considered according to the phase of illness in order to improve the family supporting and quality of life and reduce the stress in breast cancer patients through this study results.