• 한국광학회지
• /
• 제15권3호
• /
• pp.263-267
• /
• 2004

Ti:sapphire 레이저로 펌핑하는 연속발진 Nd:YAG 레이저의 출력 특성과 Cr$^{4+}$:YAG 결정을 포화 흡수체로 이용하는 수동형 Q-switching된 Nd:YAG 레이저의 평균 출력, 펄스폭 및 반복률 등의 특성을 조사하였다. 그 결과 Nd:YAG 결정에 입사되는 Ti:sapphire 레이저의 펌핑 출력이 850 ㎽일 때, 연속 발진 Nd:YAG 레이저의 출력이 450 ㎽로 측정되어 출력 기울기 효율이 약 56%로 계산되었다. 또한, 초기 투과율이 90%인 Cr$^{4+}$:YAG 결정을 이용하여 수동형 Q-switching된 Nd:YAG 레이저 출력이 200㎽로 측정되었고, 이때의 펄스 반복률 및 펄스폭은 각각 23.8 KHz 및 17.0 ns로 측정되었다.되었다.

• 대한치과보철학회지
• /
• 제27권2호
• /
• pp.155-172
• /
• 1989

The purpose of this study is to measure the bonding strength at the enamel and dentin of extracted bovine incisors when they are irradiated by W Nd: YAG, EoQ Nd: YAG, and CW $CO_2$ laser, etched and then attached by composite resin. The laser-irradiated surface, the etched surface after the laser-irradiation and the interface of the treated surface and resin are observed by using scanning electron microscope. The NP Nd:YAG laser is used at the peam power of 207 KW. The EOQ Nd: YAG laser is used at the peak power of 1.15Mk. The CW $CO_2$ laser is used at the energy output of 5W and 10W in enamel; in dentin, at the energy output of 2W. The obtained results were as follows: 1. The shear bond strength of enamel decreased in the following order: EOQ Nd:YAG laser group, NP Nd:YAG laser group, CW $CO_2$ laser groups, unlased group. The unlased group showed a significant difference from EOQ Nd:YAG laser group (P<0.01), NP Nd:YAG laser group (P<0.05), but no significant difference from CW $CO_2$ laser group (P>0.05). 2. The shear bond strength of dentin decreased in the following order: CW $CO_2$ laser group, NP Nd:YAG laser group, unlased group, EOQ Nd:YAG laser group. The unlased group showed a significant difference from CW $CO_2$ laser group (P<0.01), but no significant difference from Nd:YAG laser groups (P>0.05). 3. The scanning electron microscope of enamel revealed irregular microcrack and pore at the surface in the NP Nd:YAG laser group and CW $CO_2$ laser group, but the crackless flat surface in the EOQ Nd:YAG laser group. 4. The scanning electron microscope of dentin revealed obstruction of in most of dentinal tubule and decrease of diameter. 5. The scanning electron microscope of the interface of resin and enamel revealed prominent penetration of resin tag in the EOQ Nd:YAG laser group.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1898-1904
• /
• 2003

Laser heat treatment is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power $CO_{2}$ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of matrensitic structure. In this investigation, the microstructrual features occurring in Nd:YAG laser hardening SM45C and $STD_{11}$ steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimisation of the processing parameters for maximum hardened depth of SM45C and $STD_{11}$ steel specimens of 10mm thickness by using CW Nd:YAG laser.

• 한국광학회지
• /
• 제19권4호
• /
• pp.320-326
• /
• 2008

광섬유 연결 반도체레이저 여기 세라믹 Nd:YAG 레이저의 전기광학 Q-스위칭 출력 특성에 대해 연구하였다. 세라믹 Nd:YAG 레이저의 Q-스위칭은 여기원의 펄스폭 $1,000\;{\mu}s$, 출력 거울의 반사율 77% 및 지연시간 $985\;{\mu}s$에서 최적화되었다. 여기 에너지 17.9 mJ에서 0.35 mJ의 Q-스위칭된 출력 에너지와 약 4 ns의 펄스폭이 측정되어 1.9%의 출력 효율과 87.5 kW의 첨두 출력을 나타내었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1302-1308
• /
• 2003

Welding characteristics of austienite 304 stainless steel and SM45C using a continuous wave Nd:YAG laser are experimentally investigated. Laser beam welding is increasingly being used in welding of structural steels. The laser welding process is one of the most advanced manufacturing technologies owing to its high speed and deep penetration. This paper describes the weld ability of SM45C carbon steel and austienite 304 stainless steel for machine structural use by Nd:YAG laser.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.223-224
• /
• 2006

In this study, we have investigated the micromachining of PZT to fabricate interdigitated electrodes of electro active material actuator using Nd:YAG laser We have observed groove shapes of PZT with changing beam power, scanning speed, gas, and so on to find optimum conditions of the laser processing for PZT grooves. As a result, this method has been applied to the laser micromachining for grooves in PZT surface, and we could have optimum parameters of Nd:YAG laser Finally it was shown that the laser micromachining of PZT can substitute fer bonding, etching and deposition processes in fabricating electro active material actuator embedded with interdigitated electrodes.

• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.491-498
• /
• 1996

The development of a compact two-wavelength Nd:YAG laser for dental and ENT applications is presented. The Nd:YAG resonator generates either 1.06$\mu$m or 1.32$\mu$m. The wavelength selection is made at the control panel. The Nd:YAG laser parameters at 1.06$\mu$m are ; the maximum pulse duration of 150$\mu$s, repetition rates of I-100Hz, and the maximum average power of 25W. At 1.32$\mu$m, the pulse duration is the same where the repetition rates and the maximum average power are I-30Hz and lOW respectively. High voltage power supply consists of a simmer module and two identical high voltage DC converters. In order to make a complete medical laser system, an optical fiber delivery unit, foot pedal and water spray handpiece are also developed. The wavelength selection is reliable since no movement of optical or mechanical components is required. The high voltage power supply is compact, easy to be maintained and applicable for other laser systems due to its modular design.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2000년도 춘계학술발표대회 논문개요집
• /
• pp.55-60
• /
• 2000

Laser welding is an important technology in the assembly of automotive. In this paper, Nd:YAG laser welding of applications for auto body assembly will be introduced. This paper will describe characteristics of the CW Nd:YAG laser lap-joint welding, and laser welding of specific configurations for a Zinc-coated steel. Experimental results indicated that the weld quality of auto body assembly using the CW Nd:YAG laser welding technology.

• 대한치과교정학회지
• /
• 제27권1호
• /
• pp.141-155
• /
• 1997

교정장치의 직접접착으로 인한 프라켓 주위의 탈석회화 개선 및 산부식시 야기되는 법랑질의 목적 부위 이상으로의 산의 유출방지와 시술시 시간소요 개선을 목적으로 레이저를 조사한 치면의주사전자현미경 소견을 관찰하고 브라켓과 치면 사이의 전단접착강도 및 적합한 조사에너지량을 측정, 평가하기 위하여 실험을 시행하였다. 실험재료로 189개의 소구치를 사용하여 산부식 및 Nd:YAG 레이저로 100mj 10pps, 100mj 20pps, 150mj 20pps, 200mj 20pps를, Er:YAG 레이저로 60mj 5pps, 60mj 10pps, 100mj 10pps, 200mj 10pps, 200mj 15pps, 400mj 10pps를 조사한 각 15개 총 165개의 치 아를 교정용 접착제로 접착한후 24시간, 1주, 3주 후로 나누어 전단 접착강도를 측정하였으며, 나머지 24개의 치아에서 산부식군과 각 레이저 조사군 및 정상치아인 비처치대조군을 주사전자현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. Nd:YAG 레이저 및 Er:YAG 레이저의 각 조사에너지량에 따른 평균 및 표준편차를 얻었다. 2. 같은 에너지 밀도를 조사한 경우 Er:YAG 레이저 조사군의 전단접착강도가 Nd:YAG 레이저 조사군보다 높았다. 3. Nd:YAG 레이저 조사군에서는 150mj 20pps에서, Er:YAG 레이저 조사군에서는 200mj 15pps에서 가장 높은 전단접착강도를 보였다. 4. 전단접착강도 및 주사전자현미경 관찰 결과 브라켓 접착시 Nd:YAG 레이저 조사군에서는 150mj 20pps, Er:YAG 레이저 조사군에서는 60mj 10pps 조사가 적합하다고 인정되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 광학 및 양자전자학 워크샵
• /
• pp.107-115
• /
• 1989

A 200 W industrial Nd:YAG laser was developed and its weding applications were investigated. The important factors in designing of an industrial Nd:YAG laser were analyzed and special sedign features were explained. Also, the performance of laser weldings of Zircaloy-4, stainless steel and fine thermocouples was presented.