• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.80-87
• /
• 2006

Seals are usually made from elastomer, a kind of rubber, and it has the non-linearity and hyper-elasticity. U-type seals are used to prevent the leakage of internal fluid sealed in hydraulic actuator because they have more excellent performance than O-rings or rectangular seals. As a core part of hydraulic actuator, U-type seal gives much effect on performance and reliability of actuator. This study considers an NBR U-type seal under high pressure of a hydraulic actuator, and provides its deformation, stress-strain characteristic and contact force using the non-linear finite element analysis. Analysis results are compared with the experimental ones performed by the self-developed testing equipment. Verification result shows that this study presents a good application process for the effective design of U-type seals under high operation pressure.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2003년도 춘계 학술논문발표회 논문집
• /
• pp.434-439
• /
• 2003

원전 계통에서는 gas circulator, fuel handling system 등에 수 천여 개의 봉합(seal) 부위가 존재하며, 그 형상 또한 5 mm 에서부터 600 mm로 다양하다. 이러한 sealing 재료는 사용온도가 유리전이온도 이상인 열가소성 수지이며, 유연성 있는 segment의 조합으로 자유운동을 가지게 되는데 이러한 구조는 비교적 낮은 방사선 선량에 대해 취약하며, 원전계통에서는 NBR 및 ethylene-propylene 계열의 높은 내방사선 특성을 가지는 O-ring이 주로 사용되어지며, 10년을 교체시기로 주기적으로 교체하는 실정이다[2]. 이러한 seal 부위는 공정 전체에 걸쳐 다양한 열화요인에 노출되며, 최대 20$0^{\circ}C$의 온도, 압력 40 bar, 연간 1Gy~1MGy의 방사선에 노출된다.(중략)

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.241-247
• /
• 2003

The sealing performance of O-ring is effected in environments of the O-ring seal, like that applied pressure, working temperature, pre-compressed ratio and materials. In this paper, design of composite O-ring under pressurized, compressed was optimized based on Taguchi experimental design method. and it analysed numerically using non-linear finite element method. Ogden model in which is developed based on the experimental data is used for simulating the contact stress and strain in NBR and PTFE materials. Sensitivity analysis was performed with FEM results, which are contact stress, strain and temperature as variable.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.43-48
• /
• 2016

Multi-Surface (MS) treatment is a new technique of surface treatment to reduce the static friction factor on the surface of rubber. MS treatments include 4 methods which names are MS-V (UV-irradiation on the rubber surface), MS-M (doing the chemical reaction with double bond of rubber), MS-Q (dilution of rubber surface by silicone surfactant), and MS-P (coating and heating of rubber surface). The experiment and test of every MS-treatment had been carried out using acrylonitrile-butadiene rubber (NBR), ethylene-propylene-diene rubber (EPDM), and chlorosulphonated rubber (CSM) as rubber materials. It had introduced the steps of every MS-treatment process and the result of the properties test. From the research, it was found that the best method was MS-V treatment because it suited all the samples and the effect was obviously.

• Elastomers and Composites
• /
• 제27권4호
• /
• pp.247-254
• /
• 1992

The purpose of this dissertation is to study the vulcanization characteristics, compression set and other physical properties of NBR vulcanizates according to the various plasticizer and its content. Vulcanization characteristics were investigated by using cure that has obtained by means of rheometer and Mooney viscometer. The result of physical properties, vulcanization characteristics are as fellows. 1. The results of test for optimum cure time in vulcanization characteristics of NBR compounds indicated the rapidity of scorch time according to the increase of amounts of plasticizer. 2. In the test of compression set property, LCR was the best effect. 3. In the test of oil resistance, LCR was the best effect.

• 대한화학회지
• /
• 제57권5호
• /
• pp.606-611
• /
• 2013

A facile one-pot syhthesis of 3-substituted triazolopyridazine and thieno-triazolopyridazine derivatives is described. This protocol involves the preparation of heteroaryl hydrazone from the aldehyde and pyridazinohydrazine derivative followed by subjecting the intermediate directly to oxidative cyclization to assemble the desired 1,2,4-triazloe moiety by employing the mixture of Me4NBr and oxone. This condition is efficient and is able to tolerate wide range of functional groups.

• Elastomers and Composites
• /
• 제30권1호
• /
• pp.9-19
• /
• 1995

To make filler loaded conducting rubber which has the excellent electronical and physical properties, CR and NBR were mixed with magnetite$(Fe_3O_4)$. From the result of the study, vulcanization characteristics shows the upgrading curve as increase in filler concentration and CR has more torque than NBR. When elongation be higher, modulus comes to decreases. Tear strength gradually decrease after showing of the maximum point when is in the 100phr in all. Resilience is not good to cause the increase in filler concentration. In the electrical properties, conductivity becomes smaller when filler concentration is increased. The increase of voltage makes an conductivity grown, but the changed rate is weak. The influence of temperature hardly changes on increasing temperature. The morphology and the distribution for a conductivity filler through SEM were better, the more filler concentration increase, the shorter the particle interval is.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.392-400
• /
• 2001

The sealing performance of an elastomeric O-ring seal using bi-materials has been analyzed for the contact stress behaviors that develop between the O-ring seal and the surfaces with which it comes into contact. The leakage of an O-ring seal will occur when the pressure differential across the seal just exceeds the initial (or static) peak contact stress. The contact stress behaviors that develop in compressed O-rings, in common case of restrained geometry(grooved), are investigated using the finite element method. The analysis includes material hyperelasticity and axisymmetry. The computed FEM results show that the contact stress behaviors are related to a ratio of length between NBR and FFKM and temperature of vaccum chamber.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.114-114
• /
• 2001

The thermal and friction characteristics of phenolic resin and model friction materials were investigated with the content of acrylonitrilebutadienerubber(NBR). The thermal characteristics of material was performed by dynamic mechanical thermal analysis and differential scanning calorimetry. The friction and wear characteristics of the material were determined by using friction material testing machine. The results show that with the more content of rubber, the loss modulus of friction material was increased. The friction coefficient and the specific wear rate with various NBR contents were reported.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.91-96
• /
• 2019

The purpose of this study was to examine the effect of different yarn twisting methods on physical properties. Plain single jersey structured fabrics were knitted from Kevlar yarn, and from Kevlar/HPPE, and from Kevlar/Basalt fiber, and from Kevlar/Glass fiber and Kevlar/Stainless steel fiber blended and core-spun yarns. and then, The fabrics were coated NBR Latex. The physical properties, including tear strength, modulus, degree of penetration, heat resistance, and cut resistance of the knitted fabrics were investigated and compared. Kevlar/HPPE blended yarn fabrics recorded the highest heat resistance (13 Sec.). and Kevlar/HPPE blended yarn fabrics had good cut resistance (Cut Level 4).