• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.237-248
• /
• 2020

GNSS has been evolving dramatically in recent years. There are currently 6 GNSS (4 GNSS, AND 2 RNSS) constellations, which are GPS (USA), GLONASS (Russia), BeiDou (China), Galileo (EU), QZSS (Japan), and IRNSS (India). The Number of navigation satellites is expected to be over 150 by 2020. As the number of both constellations and satellites used for the improvement of positioning performance, high accuracy, and robustness of precise positioning is more promising. However, a large amount of the correction messages is required to support the augmentation system for the available satellites of all the constellations. Since bandwidth for the correction messages is generally limited, sending or scheduling the correction messages might be a critical issue in the near future. In this study, we analyze the relationship between the size of the bandwidth and Real-Time Kinematics (RTK) performance. Multiple Signal Messages (MSM), the only Radio Technical Commission for Maritimes (RTCM) message that supports multi-constellation GNSS, has been used for this assessment. Instead of the conventional method that broadcasts all the messages at the same time, we assign the MSM broadcasting interval for each constellation in 5 seconds. An open sky static and dynamic test for this study was conducted on the roof of Sejong University. Our results show that the RTK fixed position accuracy is not affected by the 5-second interval corrections, but the ambiguity fixing rate is degraded for poor DOP cases when RTK correction are transmitted intermittently.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.43-50
• /
• 2020

In this paper a low power Spreading Code Authentication (SCA) sequence with a BPSK(1) modulation at a frequency offset of +7.161 MHz is tested for authentication purposes, the Galileo E1OS is used as base signal. The tested signals comprise a Galileo constellation with 5 satellites including the Galileo OS Navigation Message Authentication (OSNMA) and a low power offset BPSK (OBPSK(7,1)) as SCA component. The signals are generated with the software based MuSNAT-Signal-Generator. The generated signals were transmitted Over-The-Air (OTA) using a Software-Defined-Radio (SDR) as pseudolite. With a real-environment-testbed the performance of the SCA in real channel conditions (fading and multipath) was tested. A new SCA evaluation scheme is proposed and was implemented. Under real channel conditions we derive experimental threshold values for the new SCA evaluation scheme which allow a robust authentication. A Security Code Estimation and Replay (SCER) spoofing attack was mimicked on the real-environment-testbed and analyzed with the SCA evaluation scheme. It was shown that the usage of an OBPSK is feasible as an authentication method and can be used in combination with the OSNMA to improve the authentication robustness against Security SCER attacks.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.71-77
• /
• 2020

KRS which is subsystem of Korea Augmentation Satellite System (KASS) performs a role of collecting and monitoring GPS signals. In order to generate the accurate correction message, the site which meets the requirements should be selected and verification to meet each requirement should be accompanied. When the sites are selected, the environmental considerations are EMI, clear horizon (CH) and multipath. Of these, EMI and CH can be checked for satisfaction by instrumentation, but multipath error is difficult to predict. Therefore, multipath error analysis for the installation position of actual antenna at each KRS site should be preceded, and multipath scenario should be generated for each location to analyze the effects of the resulting system performance. In this paper, based on satellite signals collected from each KRS sites, the method for analyzing multipath error in each KRS sites is described, and the multipath error is analyzed. Also to perform an analysis of the effects on system performance due to multipath error, multipath error modeling is performed for the generation of simulation scenarios.

• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.245-254
• /
• 2008

If the broadcast message is sent, first of all, the privileged users will decode the session key by using his or her personal key, which the user got previously. The user willget the digital information through this session key. As shown above, the user will obtain messages or session keys using the keys transmitted from a broadcaster, which process requires effective ways for the broadcaster to generate and distribute keys. In addition, when a user wants to withdraw or sign up, an effective process to renew a key is required. It is also necessary to chase and check users' malicious activities or attacking others. This paper presents a method called Traitor Tracing to solve all these problems. Traitor tracing can check attackers and trace them. It also utilizes a proactive way for each user to have effective renewal cycle to generate keys.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.167-174
• /
• 2016

Runway and taxiway is base facilities for aircraft take off and landing and runway capacity is one of major factor for airport capacity. Runway occupancy time is affect on the runway capacity. The identification of aircraft using taxiway by analysis of airport ground surveillance data and the measurement of pass time on the points is general method for the confirmation of the runway occupancy time. This study is runway occupancy time analysis of landing airplane using ADS-B message, in this study we surveyed landing aircraft runway occupancy time and analysis of serviced record using taxiway include rapid exit taxiway. The result of analysis is to confirm the different of landing direction and aircraft category on the same runway caused by structure of airport. Also the result of runway occupancy time analyzed data, it is base input data for the air transportation simulation.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.567-572
• /
• 2005

Trade between nations has been globalized since establishing the WTO(World Trade Organization). By lowering trading barriers under the WTO's system, trade in goods has been gradually increased It requires global logistic system that transports goods in between nations. To save cost of product, cargo of product is containerized and container ships to carry container cargo is going to be bigger: In the market, there are many vendors to provide artificial intelligent modules to operate container terminal. In order to integrate automated container terminal system easily and successfully, this thesis proposes high-level XML/ JMS( eXtensive Markup Language/Java Message Service) communication model and multi-agent based system architecture to share knowledges, solve problems, and active objectives by cooperating between autonomous and intelligent agents that are developed by 3rd party companies in the market. This thesis analyzed current situation of advanced automated container terminal with case studies on implemented systems and difficulties to develop automated container terminal system, reviewed technologies of intelligent agent, communication and automation that unmaned automated container terminal is required.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.309-314
• /
• 2006

In general DGPS system, the correction message is transferred to users by wireless modem. To cover wide area, many DGPS station should be needed. And DGPS users must have a wireless modem that is not necessary in standalone GPS. But SBAS users don't need a wireless modem to receive DGPS corrections because SBAS correction message is transmitted from the GEO satellite by L1 frequency band. SBAS signal is generated in the GUS(Geo Uplink Subsystem) and uplink to the GEO satellite. This uplink transmission process causes two problems that are not existed in GPS. The one is a time delay in the uplink signal. The other is an ionospheric problem on uplink signal, code delay and carrier phase advance. These two problems cause ranging error to user. Another critical ranging error factor is clock synchronization. SBAS reference clock must be synchronized with GPS clock for an accurate ranging service. The time delay can be removed by close loop control. We propose uplink ionospheric error correcting algorithm for C/A code and carrier. As a result, the ranging accuracy increased high. To synchronize SBAS reference clock with GPS clock, I reviewed synchronization algorithm. And I modified it because the algorithm didn't consider doppler that caused by satellites' dynamics. SBAS reference clock synchronized with GPS clock in high accuracy by modified algorithm. We think that this paper will contribute to basic research for constructing satellite based DGPS system.

• Journal of Advanced Navigation Technology
• /
• v.14 no.6
• /
• pp.824-830
• /
• 2010

PLC_Zigbee system, implemented in a previous study, uses ZigBee Node based on PLC (Power Line Communication). The weak point of the system is that the long distance powerline communication and PLC is impossible to use in the areas where the powerline is not installed. In this paper, we added CDMA (Code Division Multiple Access) module using a data transfer method of SMS (Short Message Service) and XBee of WSN (Wireless Sensor Network) module to the previous system, and got around the restriction of place and environment of PLC system through the interfacing of each communication media. We, thus, implemented a wide range of real monitoring system.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.401-409
• /
• 2023

This study compared and analyzed the performance of a distributed area search algorithm and a distributed probability search algorithm based on information exchange between ships. The distributed algorithm is a method that can search for an optimal avoidance route based on information exchange between ships. In the distributed area search algorithm, only a ship with the maximum cost reduction among neighboring ships has priority, so the next expected location can be changed. The distributed stochastic search algorithm allows a non-optimal value to be searched with a certain probability so that a new value can be searched. A circular-based ship collision avoidance model was used for the ship-to-ship collision avoidance experiment. The experimental method simulated the distributed area search algorithm and the distributed stochastic search algorithm while increasing the number of ships from 2 to 50 that were the same distance from the center of the circle. The calculation time required for each algorithm, sailing distance, and number of message exchanges were compared and analyzed. As a result of the experiment, the DSSA(Distributed Stochastic Search Algorithm) recorded a 25%calculation time, 88% navigation distance, and 84% of number of message exchange rate compared to DLSA.

• Journal of Navigation and Port Research
• /
• v.41 no.3
• /
• pp.87-92
• /
• 2017

To enhance the reliability and/or resilience of the PNT service included in the e-Navigation strategy of the IMO, the evaluation of the AIS-TWR method for the asynchronous R-mode for maritime service, which is available even in the absence of the GNSS, is described. For the AIS-TWR, which is capable of ranging through message exchange even without high precision synchronization, the operation scenario and the error factors according to the AIS system specifications are proposed and analyzed. Cramer-Rao Lower Bound is presented for the performance evaluation of the AIS-TWR algorithm. A simulation by AIS-TWR method of two AIS systems in a 3 km static environment shows estimation error of about 41m compared to the real value..