• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2569-2574
• /
• 2012

HMS(Hull Mount Sonar) equipment mounted on PCC(Patrol Combat Corvette) is suitably designed for active mode, and the specific character of sensor or system is not appropriate for the frequency range to detect a torpedo. In this article, in order to implement the function of detecting torpedoes with HMS of existing PCC, I will analyze the feature of input signals each PCCs and design a circuit to compensate reversely for the input signal in certain frequency. And also, I will suggest the most adequate torpedo defense system suitable for the special operating environment and the characteristic of naval vessels, implementing functions such as AGC of input signal and fixing the frequency range of different input signals per different warships.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.51-58
• /
• 2013

Recently, there has been an increase in the demand for natural gas as a source of clean energy, which has increased the demand for LNG carriers. However, LNG carriers require a capital investment to obtain equipment for the regasification process, which prevents fires and explosions. Thus, on account of NIMBY, a CNG carrier is suggested that eliminates the need for regasification equipment. Meanwhile, carbon dioxide emissions are more and more regulated by international conventions such as the Kyoto Protocol. Because of this, $CO_2$ carriers have also received international attention as a methodology to transport and store $CO_2$ cargoes. Several vessels or tanks to transport and store $CO_2$ gas have been studied in various countries. This paper proposes a conceptual design for a 20ft container shaped tank to effectively transport small cargoes of $CO_2$ and CNG. The proposed pressure vessel or tank will be carried by a conventional containership or special cargo ship. The influences of the design parameters for proposed pressure vessel or tank. Including the materials, scantlings, and shape of the pressure vessel, are studied theoretically and computationally.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.51-61
• /
• 2018

In this study, the operability of an FLBT (floating LNG bunkering terminal) was evaluated experimentally. Model tests were conducted in the KRISO (Korea Research Institute of Ships and Ocean Engineering) ocean engineering basin. An FLBT, an LNG carrier, and two LNG bunkering shuttles were moored side by side with mooring ropes and fenders. Two white-noise wave cases, one irregular wave case, and various regular wave cases were generated. The relative local motions between each LNG loading arm and its corresponding manifold in the initial design configuration were calculated from measured 6-DOF motions at the center of gravity of each of the four vessels. Furthermore, the locations of the LNG loading arms and manifolds were varied to minimize the relative local motions.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.5
• /
• pp.9-14
• /
• 2009

The green water on deck has many harmful effects on the vessel in rough seas such as damages to hull structures, damages to cargos, increase of the downtime, decrease of the stability, and so on. Floating Production Storage and Offloading vessels (FPSOs) are operated in a specific location and are normally positioned to meet mostly head or bow waves in order to reduce the roll motions. But this makes FPSOs more vulnerable to green water around the bow region therefore the bow shape should be properly designed to mitigate the green water damage. In this paper, experimental results in regular head waves for three kinds of bow shapes are compared and some design considerations are proposed, with the building a database for computational fluid dynamics (CFD) validation in mind.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.211-221
• /
• 2011

Tugboats are widely used near harbors to assist with various operations such as the berthing and deberthing of very large vessels and the towing of barges. Capsizing accidents involving tugboats occasionally take place when the tugboat makes rapid turns in harsh weather conditions. When there is little evidence suggesting how the accident occurred and when the crew members are missing, it is necessary to predict the time history of the towing vessel’s attitude and trajectory from its departure point to when and where it capsized, depending on various input parameters using a numerical simulation. In this paper, the dynamics of a tugboat and a towed barge in conjunction with the external force and moment were established, and the possible input parameters and operational scenarios which might influence the large roll motion of the tugboat were identified. As a result of analyzing the simulated time history of the excessive roll motion of the tugboat, it was found that roll motion can take place when the tugboat is situated on the crest of a wave and when it is pulled by a towed barge through a towing line. The main cause of the accident would be the parameters that primarily influence such situations. These are the wave parameters, course changing scenario, and the amount of tension.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.173-178
• /
• 2011

Marine TEMA heat exchanger is the equipment to transfer the heat energy through both fluids that are enclosed separately by applying conduction and convection phenomena for a large vessels, Especially for heat exchanger working under the high temperature and high pressure, the expansion ratio should be taken into account other than under the low temperature and low pressure. This study was tried to find out the ideal expansion ratio through analyzing the elasto-plastic stress behavior of deformation while tubes are expanded with the finite element methods.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.274-282
• /
• 2008

Ships' hull is typically protected by a combination of protective coating system and electrical cathodic protection system, which has been an economical and effective measure for ship's hull to date. However, ships' rudder and adjacent hull areas are known to be subjected to premature corrosion damages, which require more frequent coating repair than other hull areas. Conventional organic coating system for ship's hull has been known only to remain intact just for 2~3 months on the rudder and adjacent area, especially for the fast-going ships such as container carriers or naval vessels. In this study, special organic/inorganic coating materials, which are commercially available, were tested in terms of cavitation resistance as an alternative to existing rudder & hull protection system. Both standard ultrasonic tester and in-house developed ultra water jet test method were employed as a means to evaluate their performance against cavitation induced damages. Additionally, the overall cost evaluation and workability at actual shipyard were discussed.

• Journal of Power System Engineering
• /
• v.22 no.1
• /
• pp.72-78
• /
• 2018

With growing concerns over air pollutions attributed to shipping activities, the international maritime organization has enacted a series of stringent regulations. In particular, MARPOL Annex IV Reg. 16 requires sulfur contents from exhaust gases of marine engines to be progressively reduced. To comply with this regulation, three feasible options have been introduced: using LNG as a marine fuel, using heavy fuel oil with the scrubber system, and using the marine gas oil (a type of low sulfur fuel oil). For the objectives of this paper, the holistic environmental impacts pertinent to these options were investigated and compared in ways that the flows of energy and emission were tracked and quantified through the life cycle of the ship. Research findings obtained from a case study with a large bulk carrier showed that the use of the scrubber system to purify heavy fuel oil would produce relatively fewer amounts of emissions attributing to global warming than other two options. On the other than, the use of LNG would be the way to operate the ship in a cleaner way in terms of reducing the acidification, eutrophication, and photochemical effects. Throughout the analysis, the excellence of life cycle assessment was proven to shift the environmental impact of marine systems from the short-term view to the long-term one.

• Journal of Fisheries and Marine Sciences Education
• /
• v.16 no.1
• /
• pp.110-123
• /
• 2004

Five Islands in the West Sea of Korea (Baekryeong-do, Daecheong-do, Socheong-do, Yeonpyeong-do, and Woo-do) are located very close to the North Korea's coast and all of them are under the jurisdiction of South Korea. The North and South Korean naval vessels clashed twice in the West Sea of Korea on June 15, 1999 and on June 29, 2002. These incidents were resulted from conflicts over the validity of the Northern Limit Line(NLL) and the appropriate maritime boundary between the two Koreas. From the viewpoint of South Korea, the North Limit Line is a lawful Maritime Military Demarcation Line under the Korean Military Armistice Agreement and it must be maintained as a maritime boundary between two Koreas until being substituted by a peace treaty. In conclusion, the maritime boundary between two Koreas cannot be settled easily by the principles of the International Law of the Sea at present.

• Journal of Ship and Ocean Technology
• /
• v.9 no.2
• /
• pp.21-28
• /
• 2005

Recently moored offshore vessels like as FPSO(Floating Production Storage Offloading) are frequently deployed in seas for a long time. For successful operation, the motion behavior of such a vessel in waves must be clarified in advance either theoretically or experimentally. It is of particular interest to examine the behavior, when swells are superposed to seas with different incident angle. Such a situation is actually reported in some offshore oilfield. In this paper, the motion of a FPSO in irregular waves including swells is studied in time domain. Hydrodynamic coefficients and wave forces are calculated in frequency domain using three-dimensional singularity distribution method. Time memory function and added mass at infinite frequency are derived by Fourier transform utilizing hydrodynamic damping coefficients. In the process, the numerical accuracy of added mass at infinite frequency is carefully examined in association with free decay simulations. It is found from numerical simulations that swells significantly affect the vertical motion of FPSO mainly because of their longer period compared to the ordinary sea waves. In particular, the roll motion is largely amplified because the dominant period of swell is closer to the roll natural period than that of seas.