• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.389-394
• /
• 2017

In a conventional ship structure, stiffeners with an asymmetric section, such as inverted angles, are used widely despite the disadvantage of strength compared to the stiffeners with a symmetric section, such as a built-up T. On the other hand, T-type built-up members are attracting more attention than L-type inverted angles due to the increased size of ships. The purpose of this study was to develop an optimal design program for a built-up T, and apply an evolution strategy as an optimization technique. In the optimization process, the gross thickness concept was adopted for the design variables and objective function, and the constraints are set up based on HCSR (Harmonized Common Structural Rules). Using the developed program in this study, the optimal stiffener design was carried out for 300K VLCC and 158K COT of which the orders were obtained lately. The optimal results revealed the weight reduction effect of 144 tons and 60 tons, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.138-143
• /
• 2011

Growing attention of a society to protecting weak people leads an increase of various social welfare facilities. Therefore, safety of the occupants at emergency situations, such as fire, must be considered as an important factor during the design and operation of those facilities. In this paper an exploratory study is carried out on a method quantitatively assessing the human evacuation safety of social welfare facilities. A evacuation simulation method, being routinely used in the evacuation analysis of passenger ships deriving 'Evacuability' as a quantity of safety, is applied to assess the human safety of a facility for single-moms. Based on the simulation results, the main factors that must be considered while carrying out the evacuation simulation for the human safety assessment of the facility are investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6440-6445
• /
• 2014

In steel structures, including ships and offshore structures, defects induced during construction or in use causes cracks and damages. Calculation of the stress intensity factor (SIF) K is one method for crack analysis by fracture mechanics approach. In this paper, an evaluation of K was carried out using the J integral. In particular, in this study, a CT specimen was used to calculate the J integral. In the evaluation, 859 nodes and 1618 elements were used for the J integral calculation of the CT specimen by the in-house FEM program. A comparison of the result with the ASTM formula showed that the results from the current research of the J integral was in the 99% coincidence interval. Overall, cracks in this study can be studied satisfactorily by the J integral from the above mesh size.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.883-888
• /
• 2012

Recently, the logistics industry in Asia is growing rapidly mostly with Chinese economic development. A variety of studies have been carried out to reduce the logistic cost under the situation that the global freight traffic continues to increasing. The Short Sea Shipping(SSS) system, a multi modal transport system centered around coastal shipping to realize high value-added logistics, achieved considerable success in EU. To implement the SSS system in Korea, it is necessary to develop the various essential technologies related to development of efficient ships and port facilities, including equipment for loading and unloading containers, operating and managing systems for freight terminals and technologies for tracking and securing containers. The present paper focuses on the survey of the current essential technologies available for implementation of the SSS system and suggests the direction of future development in the technologies.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.3
• /
• pp.150-157
• /
• 2016

When blocks are supported on a dock, huge reaction forces concentrated at the supports cause structural damage owing to local stress concentrations. Thus, the supports should be arranged to avoid local failure from the reaction forces by redistributing those forces. Docking analyses to determine the proper blocks and their support arrangements are introduced so that the local stresses are minimized to warrant the safety of the docking supports. Local stresses enforced by the support arrangement should be evaluated by finite element analysis (FEA). However, it is difficult to consider an accurate 3D geometry of the blocks in the finite element model because the structural design information is too complicated to determine within several days using the FEA model. This paper presents a simplified FE model to evaluate the safety of the arrangement of supports using a simplified grillage element. The grillage element can be efficiently used to obrain the reaction forces in docking analysis becasuse the reaction forces at the supports are enough to assess the safety of block. Since a simplified grillage model of the entire ship cannot accurately calculate the local stresses, an optimized modeling method based on the grillage element was introduced. The local reaction forces obtained by the proposed approach and three-dimensional FEA were discussed for typical types of ships. It is shown that the reaction forces obtained by the present grillage model are in reasonably good agreement with the FEA model.

• Strategy21
• /
• s.41
• /
• pp.153-173
• /
• 2017

On 15 December 2015, China seized an underwater drone belonging to the U.S. in the South China Sea. The underwater drone was then about to be retrieved by the Bowditch, a U.S. naval ship.Although China returned the underwater drone to the U.S. on 20 December 2016, the incident resulted in the considerable controversy involving the use of underwater drones. The reason for this is that the seizure of the underwater drone happened in the exclusive economic zone (hereafter referred to as "EEZ") of the Philippines. Part XIII of the United Nations Convention on the Law of the Sea (hereafter referred to as "UNCLOS") governs the matters of marine scientific research (hereafter referred to as "MSR"). If a State intends to use an underwater drone in the EEZ of another coastal State for the purpose of MSR, the former has to obtain the consent of the latter in accordance with relevant provisions included in Part XIII of the UNCLOS. However, it is not obvious whether the consent of a coastal State should be required to launch an underwater drone in the EEZ of the State for the purpose of hydrographic surveying or military surveying. Maritime powers such as the U.S. regard hydrographic surveying or military surveying as part of "other internationally lawful uses of the sea related to these freedoms, such as those associated with the operation of ships, aircraft and submarine cables and pipelines" found in Article 58(1) of the UNCLOS, or part of the freedom of the high seas. This interpretation is not incompatible with the implications that the UNCLOS has. Nevertheless, Korea cannot accept this kind of interpretation that is supported by maritime powers. The freedom of hydrographic surveying or military surveying could imply that the EEZ of Korea would be full of underwater drones launched by China, Japan or even Russia. Hence, Korea should claim that the data collected for the purpose of MSR cannot be distinguished from that collected for the purpose of hydrographic surveying or military surveying. This means that hydrographic surveying or military surveying without the consent of a coastal State in the EEZ of the State should not be permitted.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.201-210
• /
• 2020

Navy submarines are developed into complex weapons systems with various equipment, which directly leads to difficulties in submarine maintenance. In addition, the method of establishing a maintenance plan for submarines is limited in efficient maintenance because it relies on statistical access to the number of people, number of target ships, and consumption time. For efficient maintenance, it is necessary to derive and maintain major maintenance factors based on an understanding of the target. In this paper, the maintenance loads rate is defined as a key maintenance factor. the submarine maintenance data is analyzed using the SNA scheme to identify phenomena by focusing on the relationship between the analysis targets. Through this, maintenance loads characteristics that have not been previously revealed in quantitative analysis are derived to identify areas that the maintenance manager should focus on.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.9
• /
• pp.967-972
• /
• 2015

Because of recent interests in energy conservation and prevention of environmental pollution, research related to these topics is increasing. The U.S. Navy has started to study the HED (hybrid electric drive) system in order to improve the COGAG propulsion system's fuel efficiency in AEGIS destroyers. (This ship's fuel consumption is 40% of the total fuel consumption of the U.S. Navy.) In addition, the Korean Navy is considering applications of the HED system in AEGIS destroyers. The purpose of this study is to analyze the U.S.A.'s HED system and to simulate its generating mode energy saving rate using LabVIEW. The results confirmed that the fuel savings are about 700 kg/h.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.569-574
• /
• 2020

A floating dock is the main facility for launching ships. In the early 2000s, ship-launching technology using floating docks was developed in Korea. Therefore, the opportunity to participate in new construction projects without investment in dry docks has expanded. In this paper, a basic calculation for the safe mooring of a floating dock was performed, and a mooring system was designed based on this. This study was conducted considering the typhoon situation, which is the most serious environmental requirements of Daebul Pier, a site to be installed and operated, for a floating dock. The design load was calculated by wind load, tidal load, and wave-induced load in accordance with the internationally accepted standards. After performing the initial arrangement of the mooring line of the floating dock using the existing mooring facilities of Daebul Pier, the minimum breaking load for each mooring line was calculated for the given load. Based on the calculation, the mooring arrangement was modified to minimize the breaking load, and a final specification of each mooring line was selected.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.315-321
• /
• 2011

The CRT monitor display system for SONAR signal that are commonly used in ships or naval vessels uses vector scanning method. Therefore the processing circuits of the system is complex. Also because production had been shut down, the supply of parts is difficult as well as high-cost. FPGA -based embedded processor system is flexible to adapting to various applications because it makes simple processing circuits and its core is easily reconfigurable, and provides high speed performance in low-cost. In this paper, we describe an implementation of SONAR signal LCD display system using the FPGA embedded processor system to overcome some weakness of existing CRT system. By changing X-Y Deflection and CRT control blocks of current system into FPGA embedded processor system, our system provides the simplicity, flexibility and low-cost of system configuration, and also real-time acquisition and display of SONAR signal.