• 한국가스학회지
• /
• 제23권5호
• /
• pp.35-43
• /
• 2019

플랜트시설의 핵심부품인 산업용 밸브에 대한 기존안전관리는 인력에 의해 관리되고 있으며 점검 영역이 넓고 시설물의 특성상 제한된 접근성을 가지고 있기 때문에 어려움이 있다. 플랜트 시설의 수많은 산업용 밸브에서 누출 및 고장 발생 시 생산중단, 독성물질 및 가연성 가스의 누출 및 폭발로 인한 인명피해, 사고 위치 파악 어려움 등의 문제점이 발생되기 때문에 사물인터넷(IoT) 기술을 기반으로 한 안전관리 및 제어 시스템이 필요하다. 이 연구에서는 IoT 기반 무선통신을 통한 산업용 밸브의 안전관리 및 액츄에이터 제어 시스템 개발 내용 중에서 위험요소 예측기술 개발과 관련 된 내용이다. 밸브의 구조적 특성 분석을 하고 고장데이터, 문헌 등으로 부터 주요 위험요소 분석, 위험요소 원인분석 및 사고시나리오 분석을 통해 주요 위험요소로 인한 사고를 예방하기 위해 IoT 기반 산업용 밸브의 안전관리 기법을 개발하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.178-182
• /
• 2004

Numerical analysis of a gaseous jet submerged in a liquid environment was carried out using the volume of fluid(VOF) method to simulate the kinematics of the gas-liquid interface. Two nozzle geometries were tested, one for Fanno tube and the other for converging diverging nozzle. Commercial code was used for the present calculation. Transient behavior of a gaseous jet since its start showed periodic nature of the jet, which was also observed in previous measurements.

• Environmental Analysis Health and Toxicology
• /
• 제16권2호
• /
• pp.103-114
• /
• 2001

Worldwide trend of waste treatment technology is rapidly transferring from "incineration system" to "gasification & melting system" which can derive the resources from waste and charge no more environmental burden to nature. And therefore it is necessary for our country to adopt gasification & melting system urgently to present the land pollution and lack of landfill area. Among several gasification and melting processes Daewoo-Thermoselect gasification and melting system is the representative process which can transfer waste to resources such as sin-gas, molten slag, metal hydroxide, mixed salt and sulfur through the process of compaction, degasification, gasification and melting.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.617-626
• /
• 1993

Energy saving is a very important subject for research workers nowadays. While most people are concerning with the modern methods, the authors investigated this problem from another angle- the chinese traditional methods of energy saving. The tunnel with technique and its combination with computer simulation and fuzzy compressive judgement methods are discussed. Earth heat green house, marsh gas, solar energy underground storage system, storing of nature cold sources, have been introduced in this paper.

• 천문학논총
• /
• 제8권1호
• /
• pp.199-206
• /
• 1993

We review recent systematic investigation of the X-ray spectra of early type galaxies by using the Einstein data base and present new results by the ROSAT observations. The Einstein data suggested that the galaxies with low X-ray to optical luminosity ratio may have another very soft component. ROSAT observations confirm its presence and call for further study to understand the nature of this very soft emission. The X-ray bright galaxies have emission temperature of ${\sim}\;0.8\;keV$ and show radial gradients in the sense that X-ray emission is softer and more absorbed in the inner region.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.133-138
• /
• 2005

The worldwide trend of waste treatment technology is rapidly transferring from "incineration system" to "gasification & melting system" which can derive the resources from waste and charge no more environmental burden to nature. And therefore it is necessary to adopt gasification & melting system to prevent the land pollution and to solve the problem of landfill area. Among several thermal waste treatment processes gasification and melting system is the representative process which can transfer waste to resources such as syn-gas, molten slag, metal hydroxide, mixed salt and sulfur through the process of compaction, pyrolysis, gasification and melting.

• 에너지공학
• /
• 제10권1호
• /
• pp.33-39
• /
• 2001

석탄화력발전소에 정착되는 고속분립체 이송용 곡관의 내마모성 향상에 관한 수치해석 및 실험적 연구를 수행하였다. 22.5$^{\circ}$와 90$^{\circ}$ 곡관을 모델로 하여, 분립체에 의한 곡관의 마모를 감소시키기 위해 유동방향이 전환되는 부분에 와류장이 형성되도록 곡관의 단면형상을 변화시켰다. 삼차원, 난류유동장의 지배방정식을 유한체적법으로 이산화시키고, SIMPLE 알고리즘을 이용하여 해를 구하였다. 수치해석을 통해 마모감소를 위한 새로운 형상의 곡관을 설계하였다. 새로운 형상의 곡관을 제작, 운전중인 국내 화력발전소에 장착하여 마모실험을 수행하였으며 내마모성이 매우 향상되었음을 알 수 있었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.231-237
• /
• 2004

Vacuum carburizing continues to gain acceptance as an alternative to atmosphere carburizing particularly in the car industry. The advantages of low-pressure carburization over atmospheric gas carburization is not only the creation of a surface entirely free of oxide and the environmentally friendly nature of these methods but also an improvement in deformation behaviour achieved by combining carburization with gas quenching, a reduction in batch times by increasing the carburization temperature, low gas and energy consumption and the prevention of soot to a large extent. In present study, an improved vacuum carburizing method is provided which is effective to deposit carbon in the surface of materials and to reduce cycle time. Also LPC process simulator was made to optimize to process controls parameters such as pulse/pause cycles of pressure pattern, temperature, carburizing time, diffusion time. The carburizing process was simulated by a diffusion calculation program, where as the model parameters are proposed with help the experimental results and allows the control of the carburizing process with good accordance to the practical results. Thus it can be concluded that LPC process control method based on the theoretical simulation and experimental datas appears to provide a reasonable tool for prototype LPC system.

• 대한기계학회논문집
• /
• 제11권6호
• /
• pp.982-990
• /
• 1987

본 연구에서는 참고문헌(12)에서 배제된 머플러와 플래퍼밸브의 운동을 추가 시킴으로써 앞의 모델보다 실제장치에 근접시켜 보다 정확한 열적 및 동적거동을 예측 하고, 또한 컴퓨터 시뮬레이션의 수행시 계산시간을 줄여 정상운전상태의 결과를 얻고 자 한다.

• 한국압력기기공학회 논문집
• /
• 제5권2호
• /
• pp.20-26
• /
• 2009

The dominant incidents category for onshore and offshore natural gas transmission pipelines in the world is associated with outside forces. Incidents in the outside forces category embrace acts of nature, which typically cause widespread structural damage, as well as act of man, whose effects tend to cause dents and/or gouges localized at point of contact that are referred to as mechanical damage. Therefore, these damage types must be better addressed to avoid unnecessary and costly repairs and the possibility of catastrophic events. First of all, the characterizing features of mechanical damage in gas pipelines were evaluated by using of excavator or boring machine. There is no reliable method for evaluating the safe operating pressure of pipeline affected by mechanical damage. It is especially important to evaluate the remaining strength of damaged pipelines due to outside force. Therefore, the full scale burst tests were conducted to evaluate the remaining strength of pipe with mechanical damage that combines a dent and a gouge. This paper is supposed to provide information that will assist in developing a criterion to assess serviceability in pipelines with mechanical damage.