• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.66-70
• /
• 2006

Magnetite nanoparticles, which have been extensively used in many fields, were encapsulated with a natural polymer, chitosan, to improve their biocompatibility. We have synthesized magnetite $(Fe_3C_4)$ nanoparticles using chemical coprecipitation technique with sodium oleate as surfactant. Nanoparticle size can be varied from 1.2 to 7.4nm by controlling the sodium oleate concentration. Magnetite phase nanoparticles could be observed from X-ray diffraction. Magnetic colloid suspensions containing particles with sodium oleate and chitosan have been prepared. High magnetic property chitosan-microsphere particles were prepared from oleate-coated magnetite suspension using spray method. The surftce, and tile morphology of the magnetic chitosan microsphere particles were characterized using optical microscope and scanning electron microscope. Magnetic hysteresis measurement were performed using a superconducting quantum interference device (SQUID) magnetometer at room temperature to investigate the magnetic properties of the chitosan microspheres including magnetite nanoparticles. The SQUID measurements revealed superparamagnetism of nanoparticles.

• Membrane Journal
• /
• v.7 no.3
• /
• pp.131-135
• /
• 1997

Polymeric micellar enhanced ultrafiltration method using a new type of polyrmer, $\alpha$-allyl-$\omega$-methoxy polyoxyethlene and maleic anhydride copolymer (AKM-0531, Mw 15, 000), has been proposed to separate 1-naphthylamine as a weak cationic toxic organic solubilizate. Enhancement effect of polymeric micelle was identified by the ultrafiltration runs using polyacryronitrile(PAN) holow fiber membrane with molecular weight cut off 6, 000. The linear dependance of flux on the pressure difference is shown to be valid up to 0.6kg/${cm}^2$ and the rate of flux increase in response to change in the pressure is gradually reduced under the pressure difference. Rejection of 0.96 was observed for f mM of 1-naphthylamine with 2 wt.% polymer solution at the conditions of 0.4kg/${cm}^2$, natural pH. and $25^{\circ}C$ Solubilization of 1-naphthylamine into the polymeric micelle enhanced the separation efficiency.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.381-388
• /
• 2018

Various characteristics of Opuntia humifusa (O. humifusa) extract solution obtained under low temperature and reduced pressure were examined and cosmetic essences using the extract solution as a humectant were prepared. The O. humifusa extract solution represented very small surface tension (25 mN/m) and contact angle ($8^{\circ}$), compared with other humectants such as glycerine and 1% hyaluronic acid solution. Also, the viscosity and stickiness of the extract solution were very low. The O. humifusa extract solution made it possible for a small amount of oil to be dispersed stably in water without any surfactant. Unlike other humectants, the viscosity and stickiness of cosmetic essences were reduced as the extract solution content in formulation increased. These results show that the O. humifusa extract solution obtained under low temperature and reduced pressure can be used as a natural humectant that provides moisturizing property and less sticky feeling.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.147-157
• /
• 2023

Centella asiatica extract is widely used as a raw material for cosmetics due to its various effects, but it is difficult to expect penetration into the skin due to its high molecular weight and low solubility. In order to solve these problems, lipid-based liposomes of various types were developed to increase skin absorption. Therefore, in this study, we tried to increase the skin absorption rate by preparing transfersomes using surfactants as edge activators in existing liposomes. Liposome and transfersomes containing Span 80 and Tween 20, 60, 80, and 85, respectively, were prepared using a high-pressure homogenizer, and we evaluated the particle size, polydispersity index, zeta potential, and skin absorption rate. As a result, there was almost no change in the physical properties of particle size, polydispersity index and zeta potential from 25 ℃ to 60 d, and the particle size of transfersomes containing Tween 20, 60, and 80 increased after 60 d at 45 ℃. Madecassoside, main substances of the Centella asiatica extract was used as an standard and madecassoside was measured and calculated when measuring the skin absorption rate using Franz diffusion cells. As a result, formulations containing Tween 20 were the most, whereas formulations containing Span 80 were the least. According to the skin absorption coefficient (Kp) value, all formulations showed 'very fast', and the absorption rate was similar or greater than that of liposomes, except for formulations containing Span 80. Through this, it was confirmed that the larger the HLB value of the nonionic surfactant, the smaller the particle size of the transfersome, and the increased skin absorption rate due to the increased flexibility of the vesicle membrane. Through this study, transfersome using surfactant as an edge activator can be expected to solve local skin problems not only as a cosmetic raw material or product, but also by increasing skin absorption.

• The Plant Pathology Journal
• /
• v.25 no.3
• /
• pp.280-285
• /
• 2009

Powdery and downy mildews caused by Sphaerotheca fusca and Pseudoperonospora cubensis are the most common and serious diseases of cucumber worldwide. In spite of the introduction of highly effective systemic fungicides, control of these diseases remains elusive. Hence, this study aimed to develop an alternative method to chemicals in controlling the diseases by using different types of cooking oil. Egg yolk, which contains a natural emulsifier, lecithin, was selected as a surfactant to emulsify the oils. Among the different cooking oils used, soybean, canola (rape seed), safflower, sunflower, olive, and corn oils showed over 95% control values against powdery mildew of cucumber in a greenhouse test. In particular, 0.3% canola oil emulsified with 0.08% yolk (1 yolk and 60 ml canola in 20 l spray) was found to be the most effective. The treatment resulted in 98.9% and 96.3% control efficacies on powdery and downy mildews, respectively, of cucumber in the field. Canola oil exhibited direct and systemic effect, wherein powdery mildew of cucumber was suppressed only on treated leaves but not on non-treated leaves in a plant, while mycelia and conidia of the pathogen were severely distorted or destroyed by the treatment. The prospect of using the canola oil and yolk mixture as a natural fungicide is highly promising because of its effectiveness, availability, low cost, simple preparation, and safety to humans and the environment. The use of the canola oil and yolk mixture is expected to be an effective fungicide for use in organic farming and home gardening.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.61-69
• /
• 2014

Carboxymethyl-${\beta}$-cyclodextrin (${\beta}$-CMCD), as a biodegradable surfactant with hydrophobic and hydrophilic properties, has potential advantages of being applicable to the simultaneous treatment of multiple contaminated soils. In this study, the desorption behaviors of r adionuclides such as cobalt (Co), strontium (Sr), and cesium (Cs) from the soil contaminated with them were experimentally investigated and the effectiveness of CMCD as a desorbent was evaluated. The desorption equilibrium of used radionuclides could be achieved within 1~3 hr and the desorption ratio from kaolin was higher than that from natural soil. The addition of CMCD of 2 g/L increased the desorption ratio by 5~20 % and the desorption ratio of used r adionuclides was shown in the order of Co > Cs > Sr. The experimental desorption data were fitted successfully by pseudo-second order kinetic model and the desorption rate of the r adionuclides was shown in the order of Cs > Co > Sr. Hysteresis between adsorption and desorption of the r adionuclides, as shown in the order of Sr > Co > Cs, increased as the desorption rate decreased. Consequently, it could be considered that the desorption rate was one of the significant factors of the hysteresis. The addition of CMCD as desorbent increased the amount of desorbed radionuclides and decreased the hysteresis. However, the CMCD could not completely desorb the radionuclides from soils even though the excess of CMCD was added.

• Journal of the Korean Chemical Society
• /
• v.53 no.2
• /
• pp.125-132
• /
• 2009

The magnetized water is known to have a unique pattern of hydrogen bond between water molecules, thereby producing different physicochemical properties from the ordinary water. We have examined the effect of magnetized water on the change of critical micelle concentrations (CMC) of some surfactants. The CMC changes of SDS (sodium dodecyl sulfate) and CTAB (cetyltrimethylammonium bromide) dissolved in the magnetized water have been determined by the conductivity measurement at $25\;{^{\circ}C}$ and that of SDS, CTAB and Pluronic F-68 have also been examined by the surface tension method at $25\;{^{\circ}C}$. The CMC variation of SDS was examined by ITC (Isothermal Titration Calorimeter) at $25\;{^{\circ}C}$. The CMC of SDS, CTAB, and Pluronic F-68 are more decreased in the magnetized water, SDS is about $2.7{\sim}6.5$25 %, CTAB is about $2.3{\sim}3.0$%, and Pluronic F-68 is about 24.2 %, than in the control water.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.1
• /
• pp.17-27
• /
• 2023

A study was performed to increase skin permeation of tocopheryl acetate, an oil-soluble component among tocopheryl acetate, salicylic acid, and niacinamide, which are the active ingredients of the anti-hair loss toner. As a method of transparently solubilizing tocopheryl acetate while containing salicyl acid and niacinamide, we used a swollen micelle structure that increased the size of the micelle formed by the aggregation of surfactants. The prepared swollen micelle solution contains three kinds of active ingredients, and poloxamer 407 and octyldodeceth-16 were used as surfactants to increase transparent properties and stability. In addition, isostearic acid was used as a co-surfactant to increase the size of micelles. To evaluate the physical properties of the prepared swollen micelles, turbidity at room temperature (25 ℃) was measured. The Franz diffusion cell method was used to evaluate the skin permeation rate of tocopheryl acetate among the hair-loss prevention components contained in swollen micelles. After 24 h, tocopheryl acetate showed a 6-fold improvement in skin permeation compared to the control group. Therefore, it can be seen that the swollen micelles developed in this study can be applied to hair-loss prevention products or solubilized formulations of various functional cosmetics.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.97-105
• /
• 1989

This study deals with micellar effects on hydrolyses of p-nitrophenyl carboxylic esters(p-NPCE) mediated by 2-alkylbenzimidazole(R-BI) and sodium 2-alkylbenzimidazole-5-sulfonate(R-BISO$_3$Na) in aqueous and CTABr solutions. The reactions mediated by R-BI and R-BISO$_3$Na in micellar solutions are obviously slower than those by benzimidazole(BI) and sodium benzimidazole-5-sulfonate(BISO$_3$Na) respectively, and the reaction rates were decreased with increase of lengths of alkyl groups. This prestents a striking contrast to the reactions in aqueous solutions without added CTABr, of which the reaction rates are on approximately same levels. It seems due to steric effect of alkyl groups for R-BI and R-BISO$_3$Na in the Stern layer of micelle, and it is supported by measured activation parameters(${\Delta}H^{\neq},\;{\Delta}G^{\neq}\;and\;{\Delta}S^{\neq}$) of the reactions in aqueous and micellar solutions. In addition to nucleophilic ability of benzimidazole(BI) moiety of R-BISO$_3$Na on the reactions, these compounds with long alkyl groups(nonyl to pentadecyl) which form a micelle of themselves increase the reaction rates due to their micellar catalyses in aqueous solutions, not including CTABr. We measured the isotope effects to elucidate the mechanism of hydrolyses of p-nitrophenyl carboxylic esters, and the relative first order rate constant($k'_{H_2O}/k'_{D_2O}$) are on range of 2.5∼3.2. This range is too high to conclude that the hydrolyses of p-NPA mediated by various R-BISO$_3$Na proceed by nucleophilic mechanism. In other words, the reactions are assumed to proceed in part by general basic one, as compared with the reaction catalyzed by imidazole(IM) in aqueous solution.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.708-715
• /
• 2017

Recently, in order to meet the stricter emission regulations, the proportion of after-treatments for vehicles and vessels has been increasing gradually. The objective of this study is to investigate the improvement of $CH_4$ reduction ability of natural gas oxidation catalyst (NGOC), which reduces toxic gases emitted from CNG buses. Thirteen NGOCs were prepared, and the conversion performance of noxious gases according to the type of supports, the loading amount of noble metal, and surfactant and aging were determined. Support Zeolite supported on No. 3 $NGOC(1Pt-1Pd-3MgO-3CeO_2/(46TiO_2+23Al_2O_3+23Zeolite)$ is an anionic alkali metal/earth metal component that improved the oxidation reactivity between CO and NO and noble metal dispersion, and thus enhanced the $CH_4$ reduction ability. As the loading amount of Pd, a noble metal with a high selectivity to $CH_4$, was increased, the number of reaction sites was increased and the ability to reduce $CH_4$ was improved. No. 11 $NGOC(1Pt-1Pd-3MgO-3CeO_2/(Z20+Al80)$(pH=8.5), to which nitrate surfactant had been added, exhibited well dispersed catalyst particles with no agglomeration and improved the $CH_4$ reduction ability by 5-15%. The $NGOC(2Pt-2Pd-3Cr-3MgO/90Al_2O_3)$(48h aging), which was mildly thermal aged for 48h, increased the $CH_4$ reduction ability to about 10% or less as compared with No. 12 NGOC(Fresh).