• Journal of Biosystems Engineering
• /
• v.15 no.1
• /
• pp.44-51
• /
• 1990

Four models in current use for cereal grain drying, equilibrium model, Morey model, partial differential equation model and simplified partial differential equation model, were modified to be suitable for natural air drying of barley. The predicted by the four models and experimental results were compared. Three models except equilibrium model predicted moisture comtent and grain temperature very well. But equilibrium model overpredicted moisture content and grain temperature of bottom layer. The degree of prediction of the four models for relative humidities of exhaust air didn't differ much from one another and equally the four models predicted relative humidity statisfatorily. Morey model took much shorter computing time than any other models. Therefore, considering the degree of prediction and computing time Morey model was the most suitable for natural air drying of barley.

• The Journal of Korean Medicine
• /
• v.40 no.1
• /
• pp.34-45
• /
• 2019

Objectives : To maintain a healthy skin condition, the role of moisture in the stratum corneum is important. We use soap in our daily life, so we wanted to observe the changes of the skin moisture using herbal CP soap. Four kinds of herbal CP soaps were prepared and their effects on skin moisture were compared. Methods: We surveyed 39 students at A University to determine their subjective skin condition, lifestyle and washing habits. Then, a facial analysis test was performed. We made herbal CP soaps using Kyungohkgo, Hwangryunhaedoktang, Seosiokyongsan and Baeksoooh and distributed them to experiment participants. Prior to the experiment, their skin condition was checked and skin condition was assessed using Facial Diagnosis System three times in total. After the experiment, the change of skin was measured and analyzed. Results: As a result of examining the skin moisture according to the using of the herbal CP soap by the participants, the skin moisture was gradually increased compared with before use. The moisture content increased after 6 weeks of use compared to before using Seosiokyongsan, Hwangryunhaedoktang, Kyungohkgo CP soap compared to before use. But there was no significant difference between 3 weeks and 6 weeks of use compared to before use. As a result of using Baeksoo-oh CP soap, the skin moisture of the experimental participants was continuously increased. Conclusion: Natural CP soaps are believed to have a beneficial effect in increasing the moisture content of facial skin.

• The Korean Journal of Food And Nutrition
• /
• v.8 no.3
• /
• pp.239-252
• /
• 1995

The results which were examined changes In contents of constitutive lipid and fatty acid during the natural drying of Pacific Saury were as follows. During the natural drying of Pacific Saury, offal lipid and moisture contents gradually decreased. In the survey of rancidity degree extracted lipid of Pacific Saury, peroxide value was gradually Increased, TBA and acid value were radically increased thereafter 9 days of drying. Neutral lipid, phospholipid and glycolipid contents of total lipid were 95%, 4% and 2%, respectively, and in the neutral lipid, content of TG was more than 90%, and in the phospholipid, contents of PC and PE were 45∼85%, 27∼34%, respectively. Fatty acid composition of total lipid was substantially higher in C18:0 and C20:1, C22:1, C22:6 contents and fatty acid composition of neutral lipid was higher In C22:1, C22:1, contents and fatty acid composition of phospholipid was the highest in C22:6 content. In the fatty acid composition of glycolipid, monounsaturated fatty acid content has substantially higher, C16:0 content was gradually Increased In saturated fatty acid and C22:1 content was gradually decreased in monounsaturated fatty acid. It showed that fatty acid composition of triglyceride has higher in monounsaturated fatty acid content and contents of C20:1, C22:1 was gradually decreased.

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.5-7
• /
• 1974

1. This study indicates that above the fiber saturation point the drying rate can be increased with increasing the velocity of the air circutation, i.e., the drying rate of sample boards is proportional to the air velocity, but below the fiber saturation point, the effect of the velocity of air circulation is very low as shown in Figs. 1 and 2. 2. Under the controlled temperature and humidity in the kiln, the more the sample boards have moisture, the higher drying rate of it can be obtained. In other words, this means that even though in the case of drying various moisture content of wood, at the final drying stage, approximately the same percentage of moisture content of wood can be secured by employing the higher velocity of air circulation. 3. This study shows that the rate of drying in kiln changes distinctly at the fiber saturation point, i, e., above the fiber saturation point, the drying curve shows concave aginst the X axsis, but below the fiber saturation point, in the range from 30 percent of moisture content to 20 percent of moisture content, the curve shows convex as shown in Fig. 3. As the drying progresses, however, the drying curve shows concave again below 20 percent of moisture content. This means that inflection point of drying curve may be located clearly at the fiber saturation point, i.e., 30 percent of moisture content. As mentioned above, the 30 percent of moisture content of wood at which the inflectional point appears can be recognized as a critical point, i. e., the fiber saturation point at which all free water was removed from wood. The existence of inflectional point indicates that the evaporation of hygroscopic water in a cell wall is more difficult than the evaporation of free water in a cell cavity and the minor space of cell wall. The convex curve in the range of moisture content from 30 percent to 20 percent means that the evaporation of capillary condensed water has a tendency of the same rates of drying approximately, but as approaching to the 20 percent of moisture, the transfusion of moisture from wood becomes difficult because of having less moisture in cell wall. Below 20 percent of moisture content, the drying curve shows concave again, which means that it is difficult to remove the moisture located nearer to the surface of cellulose molecules and the surface bound water. These relations were revealed in Fig. 4. In comparison AC curve which does not have the two inflection points with BD curve which has two inflection points, i.e., Band D, they are mentioned already, by existence of the inflection points, the curve BD shows that the change of drying rate in the interval from 20 percent of moisture content to 30 percent of moisture content is not greater than in the case of the curve AC in the same interval. At the inflection point of 30 percent of moisture content, it can be noticed that the changing of the drying rate is very conspicuous. This phenomenon also can be recognized, as it is noticed by the Fig. 3, the drying rate from green to 30 percent of moisture content is very great. But the inclination of the curve is very slow from 30 percent of moisture content to 20 percent of moisture content, i.e., the inclination of the curve becomes almost horizontal lines. Acknowledgments Gratitude is expressed to Fred E. Dickinson, Professor of 'Wood Technology, School of Natural Resources, University of Michigan, USA for his suggestion to carry out this study.

• Journal of the Korea Furniture Society
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2006

Movement behavior, shrinkage and equilibrium moisture content (EMC), in this experiment reflected a change of hygroscopicity mainly affected by continuously compressive load during radio-frequency/vacuum (RF/V) drying and humidity changes during equilibrating. As a result of interaction of the compressive load and moisture content changing under the RF/V condition, the shrinkages in loading direction were significantly increased while those perpendicular to loading direction were decreased. The shrinkages were affected most in tangential, and least in longitudinal direction. The shrinkages showed higher values in continuous drying than in intermittent drying. In the direction of increased shrinkage, all the movements were also increased, for example, the tangential movement for the loaded-RS and the radial movement for loaded-TS; in the direction of decreased shrinkage, all the movements except the tangential movement for the loaded-TS were decreased such as the tangential and radial movements for the loaded-ES, and the radial movement for the loaded-RS, comparing with those of the load-free. EMCs of the loaded specimens were all higher than that of the load-free specimen, and the highest for the loaded-TS, the lowest for the loaded-ES. The transverse hygroscopicity of specimen was reduced for the loaded-ES, but increased for the loaded-TS.

• Journal of Biosystems Engineering
• /
• v.23 no.6
• /
• pp.583-590
• /
• 1998

This study was performed to determine the kinetic friction coefficient bulk density, dynamic and static angle of repose, and terminal velocity of the chopped rice straw in the moisture range of 8~23%, which could be used for better design and operation of the processing machinery and handling facilities. Friction coefficient was determined from the horizontal traction force measured by pulling the container holding the mass of rice straw on the various plate materials. Bulk density was measured with an apparatus consisting of a filling funnel and a receiving vessel. Dynamic angle of repose was calculated from the photos of bulk samples piled by gravity flow on a circular platform. Static angle of repose was determined by measuring the side angle of the bulk material which was left in the cylindrical container after natural discharge of the bulk sample through a circular hole in the bottom plate. Kinetic friction coefficients of rice straw on the PVC, mild steel, stainless steel, and galvanized steel were in the range of 0.303~0.434, 0.222~0.439, 0.204~0.448, and 0.206~0.407, respectively. and indicated linear increase with moisture content. The effects of moisture change on the friction coefficients were in the order of PVC, mild steel, galvanized steel, and stainless steel. Bulk density, dynamic and static angle of repose, and terminal velocity were in the range of 56.8~60.3 kg/m$^3$, 41.4~45.9$^{\circ}$, 94.4~100.8$^{\circ}$, and 1.07~4.48 m/s, respectively, and were increased linearly with the moisture content.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.3
• /
• pp.231-238
• /
• 2009

Red pine (Pinus densiflora) has been used for structural wood members of Korean traditional residence (HANOK) and historic wooden structures. For these constructions, generally, natural drying has conducted for long time; however, unless drying is conducted sufficiently, it could cause several drying defects such as check or warping. Shrinkage changes of red pine species for small clear specimens and big-size specimens according to the conditions of moisture contents, were examined. For the estimation of volumetric shrinkage at a special moisture content, it was more precise to divide the range of moisture contents into two groups, green to air-dry and air-dry to oven-dry. The volumetric shrinkage had no difference with specimen sizes in sapwood, but decreased as specimen size increased in heartwood.

• Journal of Applied Biological Chemistry
• /
• v.59 no.1
• /
• pp.57-62
• /
• 2016

In this study, we optimized fermentation conditions for the solid state fermentation of rice bran with Monascus pilosus KCCM60084, and the antioxidant activities were investigated. Optimal fermentation conditions were determined by the production of Monacolin K, a functional secondary metabolites with cholesterol lowering activity. The highest Monacolin K production were 2.88 mg/g observed on day 10 with 45% moisture content in the substrate when inoculated with 5% inoculum (w/w). Reducing power, iron chelating activity and $ABTS^+$ radical scavenging activity were significantly enhanced after fermentation by 60, 80, and 38% respectively. Furthermore, the content of total flavonoid were found to be increased by 4.58 fold. Based on these results, Monascus-fermented rice bran showed strong possibility to be used as a natural antioxidant agent due to its enhanced antioxidant activity.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.73-86
• /
• 2012

In this research, the possible applicability of mixture blended with natural, crushed, and recycled fine aggregate are discussed. The fresh and hardened properties of mortar using blended fine aggregates are monitored depending on various blending ratio of fine aggregates. Newly developed ternary diagram was also utilized for better interpretation of the data. It was found that air content increased and unit weight decreased as recycled fine aggregate content increased. With moisture type processing of recycled fine aggregate, the mortar flow was not negatively affected by increase in the recycled fine aggregate content. The ternary diagram is found to be an effective graphical presentation tool that can be used for the quality evaluation of mortar using blended fine aggregate.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.9
• /
• pp.55-66
• /
• 2011

The compulsory replacement method for soft ground treatment is simple but excellent in economic feasibility. However, the accurate replacement depth is not easy to properly predicted since an theoretical algorithm has not presently been established so far. In this research a prediction equation is proposed in a new form based on the liquid limit and natural moisture content rather than on the bearing capacity of the soft soil layer. The equation is based on the monitoring as well as the confirmatory boring at the site. In addition, the equation has been derived from the data obtained from the analysis of the characteristics of silt/clay of Sihwa region. The final prediction equation has been drawn by applying the regression analysis method.