• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.4
• /
• pp.281-285
• /
• 2003

For storage periods of tubers in Chinese yam, the levels of $\textrm{GA}_{44}$ and $\textrm{GA}_{20}$ was constant, meanwhile both $\textrm{GA}_{53}$ and $\textrm{GA}_{19}$ level were always higher than that of $\textrm{GA}_{44}$ and $\textrm{GA}_{20}$ㆍ $\textrm{GA}_9$ content as precursor of $\textrm{GA}_4$ was not changed during storage. $\textrm{GA}_{24}$ content was low to below 0.2 ng for 90 days after storage, $\textrm{GA}_{36}$ content as precursor of $\textrm{GA}_4$ like $\textrm{GA}_9$ was about 6-8 fold higher than that of $\textrm{GA}_9$ during storage. GA contents of the two gibberellin biosynthetic pathways were gradually increased when storage periods were progressed. Bioactive GA$_1$ content as the GA members of an early C-13 hydroxylation was always constant, and its content was very low as below 0.1ng per dry weight, meanwhile, bioactive $\textrm{GA}_4$ content as the GA members of non C-13 hydroxylation was drastically increased, also, its content was highest at 90 days after storage, and then decreased at 120 days after storage. Consequently, we suggest that $\textrm{GA}_4$ may be involved in controlling tuber sprouting in Chinese yam.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.1
• /
• pp.77-87
• /
• 2014

In this study, an experimental approach to measure a suite of low weight hydrocarbons was investigated with an emphasis on ethylene (EL) along with many others (ethane (EA), propane (PA), propylene (PL), n-butane (BA), acetylene (AL), methyl acetylene (ML)). Their concentrations were quantified using GC-FID system equipped with thermal desorption (TD) system. The TD-based analysis was conducted using both Link Tube/Thermal Desorber (LT/TD) method and Modified Injection through a Thermal Desorption (MITD) method. The results of these analyses were evaluated in a number of respects. The system allowed the detection of all compounds except methane with the mean response factor (RF) of 10.28 (EA) to 11.94 (PL). The method detection limits of target compounds were seen in the range of 0.027 (ML) to 0.146 ng (BA). The emission flux of some environmental samples (fruits), when measured using a small flux chamber system, fell in the range of 0.14 (AL: Kiwi) to $181ng{\cdot}g^{-1}{\cdot}hr^{-1}$ (EL: Apple Peel). The results of this study confirm that the experimental approach developed in this study allows to accurately measure emissions of low weight hydrocarbons (LWHC) like ethylene from various natural and man-made source processes.

• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.661-668
• /
• 2018

Geosmin is volatile metabolites produced by a range of filamentous cyanobacteria which causes taste and odor problems in drinking water. Molecular ecological methods which target biosynthetic genes (geoA) are widely adopted to detect geosmin-producing cyanobacteria. The aim of this study was to investigate the potential production capability of 8 strains isolated from the Nakdong River. Ultimately, a suggestion for a genetical monitoring tool for the identification of geosmin producers in domestic waters was to be made. Geosmin was detected using solid phase microextraction gas chromatography mass spectrometry (SPME GC-MS) in two strains of Dolichospermum plactonicum (DGUC006, DGUC012) that were cultured for 28 day. The highest concentrations during the experiment period was $17,535ngL^{-1}$ and $14,311ngL^{-1}$ respectively. Additionally, geoA genes were amplified using two primers (geo78F/971R and geo78F/982R) from strains shown to produce geosmin, while amplification products were not detected in any of non-producing strains. PCR product (766 bp) was slightly shorter than the expected size for geosmin producers. According to the BLAST analysis, amplified genes were at nucleotide level with Anabaena ucrainica (HQ404996, HQ404997), Dolichospermum planctonicum (KM13400) and Dolichospermum ucrainicum (MF996872) between 99 ~ 100 %. Both strains were thus confirmed as potential geosmin-producing species. We concluded that the molecular method of analysis was a useful tool for monitoring potential cyanobacterial producers of geosmin.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.7 s.262
• /
• pp.581-587
• /
• 2007

At present time, LNG demand of the world is increasing and the piping line for NG transportation has been already installed in Korea. The air fm vaporizer is, however, required because of the transportation for remotely local areas. This paper numerically investigates on the heat transfer characteristics of relevant geometric variations of air-fin vaporizer which is heated by air not by sea water. This vaporizer must be designed in consideration of both efficiency and economics because air is relatively a little heat source. In this study, the pipe and the longitudinal fins are fundamental geometric considerations. Main parameters of geometry are the number, the thickness, and the length of the fins. Finally, the results of heat transfer effects are investigated with the characteristics of each parameter variation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.29 no.3
• /
• pp.235-242
• /
• 2018

Hydrogen can be produced by reforming reaction of natural gas (NG) and biogas, or by water electrolysis. In this study, hydrogen production through water-electrolysis needs superheated steam above $700^{\circ}C$ for high efficiency. The production method of hydrogen like this was recommended for the 4-type processes for superheated steam ($700^{\circ}C$, 3 atm) by Bio-SRF combustion furnace. The 4-type processes to produce superheated steam at $700^{\circ}C$ from the heat source of SRF combustion furnace was simulated using PRO II. The optimum process was selected through exergy analysis. The difference of process 1 and 2 is to the order of depressure and heating process to change $180^{\circ}C$ and 7 atm to $700^{\circ}C$ and 3 atm. Process 3 and 4 is to utilize 25% of steam to generate superheated steam and remaining to use for the power generation by steam generator.

• Environmental Engineering Research
• /
• v.10 no.6
• /
• pp.306-315
• /
• 2005

Total gas phase mercury (TGM) concentrations and event wet-only precipitation for Hg were collected for nine months (from April, 2002 to Dec., 2002) at Sterling, NY on the shoreline of Lake Ontario. TGM concentrations measured in this study ($3.02{\pm}2.14\;ng/m^3$) were in somewhat high range compared to other background sites. Using simplified quantitative transport bias analysis (SQTBA) possible sources affecting high Hg concentration in Sterling was identified, and they are coal-fired power plants located in southern NY and Pennsylvania. Wet deposition measured at Mercury Deposition Network (MDN) sites including Pt. Petre and Egbert, ON were compared with data obtained at the Sterling to estimate the total mercury wet deposition flux to Lake Ontario. The wet deposition flux was calculated to be the highest at the Sterling site ($7.94\;{\mu}g/m^2$ from April, 2002 to Dec. 2002) and the lowest at the Egbert ($3.92\;{\mu}g/m^2$), due to the both the difference in precipitation depth and Hg concentration in the precipitation. The deposition measured at the Sterling site is similar to Lake Michigan deposition of $6-14\;{\mu}g/m^2$ (converted for ninth months) measured for Lake Michigan Mass Balance Study (LMMBS).

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.745-751
• /
• 2021

The International Maritime Organization(IMO) has established Emission Control Areas(ECA) in the Baltic Sea, North Sea, and sea areas in the United States since 2012, and encourages the use of clean fuels such as Natural Gas(NG). To keep pace with the increase in international demand for LNG bunkering vessels, research for the localization of key equipment for LNG bunkering must also be performed in Korea. For research and development of core bunkering equipment and systems, in this study, heat transfer analysis and structural analysis were performed by modeling the saddle, which must first be secured structurally by directly receiving the load of the hose. As a result, the suitability of the model was reviewed by analyzing the temperature distribution and stress level through the analysis results of this study.

• Journal of Power System Engineering
• /
• v.11 no.2
• /
• pp.5-11
• /
• 2007

액화천연가스(LNG : Liquified Natural Gas)는 연료로 사용하기 위하여 기화하는 과정을 거치게 되는데 기화하는 방식에는 해수에 의한 기화와 공기에 의한 기화의 두 가지 방식으로 나뉘게 된다. 해수에 의한 기화는 LNG 인수기지에서 대량의 LNG를 NG로 기화하기 위하여 사용하며, 공기에 의한 기화는 LNG 위성기지에서 사용처에 적합한 온도를 얻기 위해서 일반적으로 많이 사용하고 있는 공기식 기화기를 이용하여 기화를 하는 방식을 취하고 있다. LNG가 NG로 기화하는 과정에서 1kg당 200kcal의 냉열을 외부로 방출하고 있으며, 이러한 냉열의 방출로 인하여 공기식 기화기의 표면에 결빙현상을 발생시킨다. 또한 현재 사용하고 있는 기화기는 $2{\sim}3$개의 기화기를 연결하여 사용하고 있어 그 비용의 손실이 크다고 할 수 있다. 그리하여 본 연구는 최근 사용빈도가 증가하고 있는 공기식 기화기에 관한 것으로 작동유체는 실제 LNG와 특성이 비슷한 초저온 액화가스인 $LN_2$를 사용하였다. 이번 연구에 사용된 변수는 다음과 같다. 첫째, 각각의 기화기의 길이를 4000mm, 6000mm, 8000mm으로 하였고 핀의 type을 finless, 4fin, 8fin으로 하여 적용하였다. 두 번째는 봄, 여름, 가을, 겨울철에 따른 기화기의 성능을 알고자 각각의 계절별 온도와 습도를 적용하였다. 마지막으로 계절별 풍속과 실험을 하는 시간 동안의 유량을 알고자 압력을 1 bar로 적용하였다. 그리하여 이번 연구의 목적으로는 각각의 변수를 통하여 실험을 진행 한 후 vaporizer type과 길이에 대한 최적의 성능을 가지는 기화기에 대한 자료를 제시하고자 한다.기성분은 균주에 따른 약간의 차이가 있었으나 경향은 비슷하게 나타났다. 이상의 결과 알코올 발효 균주에 따른 참다래 와인의 이화학적 품질특성에는 큰 차이가 없었으나 고급알코올함량을 비교하였을 때 Sacch. cerevisiae Wine 3이 와인제조에 가장 적합한 것으로 평가되었다.장 낮은 값을 나타내었으며, 홍국의 함유량이 증가할수록 유의적으로 증가하였다. b값은 CSB가 가장 낮은 값을 나타내었으며, 홍국의 함유량이 증가할수록 유의적으로 증가하였다. 물성측정 결과 경도와 응집성은 각 시료들 간의 유의적인 차이가 나타나지 않았다. 탄력성과 부서짐성은 CSB가 가장 낮았으며, 홍국의 함유량이 증가할수록 증가하였다. 점착성은 SDB1이 가장 낮았으며, 홍국의 함유량이 증가할수록 증가하였다. 관능검사 결과 기공의 균일성은 SDB1이 가장 균일한 것으로 나타났으며, 색은 홍국의 함유량이 증가할수록 높게 나타났다. 경도, 탄력성, 단맛 및 신맛 등은 홍국 함유량이 증가할수록 증가하는 것으로 나타났다. 이취는 SDB1이 가장 적게 나는 것으로 나타났으며, 전반적인 기호도는 SDB1이 가장 높았다. 따라서 홍국을 10% 첨가한 sourdough starter를 3일 동안 발효한 후 반죽에 첨가하여 sourdough bread를 제조할 때 품질이 가장 우수한 제품을 얻을 수 있었다.생수와 여러 물질의 혼합용액의 온도가 장에 끼치는 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.2
• /
• pp.179-189
• /
• 2006

Ambient gas phase mercury concentrations including elemental mercury ($Hg^0$) were measured at the Potsdam, Stockton, and Sterling sites in NY from 2000 to 2003. Also, concentrations of ambient reactive gaseous mercury (RGM; $Hg^{2+}$) were measured at the Potsdam site during one year. The contribution of RGM($4.2{\pm}6.4pg/m^3$) was about $0.2{\sim}3%$ of the total gas phase mercury concentration measured (TGM: $1.84{\pm}1.24,\;1.83{\pm}0.32,\;3.02{\pm}2.14ng/m^3$ in Potsdam. Stockton, and Sterling, respectively) at the receptor sites. Potential Source Contribution Function (PSCF), a hybrid receptor modeling incorporating backward trajectories was performed to identify source areas of TGM. Using PSCF, southern New York, North Carolina, and eastern Massachusetts were identified as important source areas in the United States, while the copper smelters and waste incinerators located in eastern Quebec and Ontario were determined to be significant sources in Canada. The Atlantic Ocean was suggested to be a possible mercury source. PSCF incorporating back-dispersion and deposition was applied for RGM , as well as PSCF based on 2-days back-trajectories. Two different approaches yielded considerably different results, primarily due to the consideration of dispersion rather than deposition. Using back-trajectory based PSCF, eastern Ohio, southern New York, and southern Pennsylvania where large coal -fired power plants area located were identified as the large sources in US. Metallurgical industry located in eastern Quebec was resolved as well. From the result of back-dispersion and deposition based PSCF, Pennsylvania, mining facilities around Lake Superior, Toronto, Boston, MA, Quebec, and coal power plants in NY were identified to be the significant source areas for Potsdam site.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.4
• /
• pp.401-406
• /
• 2017

When Liquified Natural Gas (LNG) is vaporized into NG for industrial and household usage, tremendous cold energy was transferred from LNG to seawater during phase-changing process. This heat exchanger loop is not only a waste of huge cold energy, but will cause thermal pollution to the coastal fishery area also when cold water was re-injected into the sea. In this study, an innovation design has been performed to reclaim the cold energy for -35 to $62^{\circ}C$ refrigerated warehouse. Conventionally, this was done by installing mechanical refrigeration systems, necessitating tremendous electrical power to drive temperature. A closed loop LNG heat exchangers in series was designed to replace the mechanical or vapor-compression refrigeration cycle by process simulator. The process simulation software of PRO II with provision has been used to simulate this process for various conditions, what to effect on cold energy and used energy for re-liquefaction and evaporation process. In addition, through analysis the effect of the change of LNG supply pressure on sensible and latent heat, optimum operational conditions was suggested for LNG cold energy warehouse.