• Transactions on Electrical and Electronic Materials
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2000

Diamond films have been achieved on Si(100) substrates using helicon plasma chemical vapor deposition(HPCVD), Gas mixtures with methane and hydrogen have been used. The growth characteristics were investigated by means of X-ray photoelectroton spectroscopy, Atomic force microscopy and X-ray diffraction. We obtained a plasma density as high as 10$\^$10/~10$\^$11/ cm$\^$-3/ by helicon source. The smooth(100) faces of submicron diamond crystallites were found to exhibit pyramidal shaped architecture, The XPS spectrum for the nucleation layer indicates the presence of diamond at 285.4 eV, close to the reported value of 285.5 eV for diamond , XRD results demonstrates the existence of polycrystalline diamond as the diamond (111) and (220) peaks.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.175-180
• /
• 2007

FTIR technique was applied to delineate spectroscopic characteristics of natural, synthetic and irradiated diamonds. All of the samples studied in this work show the absorption peaks, which are generally observed in diamond as well as the specific one related to N in diamonds. Synthetic diamond is characterized with both the peaks of 1344 and $1128 cm^{-1}$ related to HPHT synthesis and specific $1050 cm^{-1}$ peak only observed in synthetic diamond, which can be used to discriminate natural from synthetic. Type (natural blue diamond: IIb, electron beam Irradiated blue diamond: Type Ia) can be used to discriminate natural from irradiated diamond. The intensity of specific $1450 cm^{-1}$ peak observed only in irradiated diamond is related with irradiation and annealing process.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.350-356
• /
• 2014

Recently, Chemical Vapor Deposition (CVD) synthetic diamonds have been introduced to the jewelry gem market, as CVD technology has been making considerable advances. Unfortunately, CVD diamonds are not distinguishable from natural diamonds when using the conventional gemological characterization method. Therefore, we need to develop a new identification method that is non-destructive, fast, and inexpensive. In our study, we employed optical microscopy and spectroscopy techniques, including Fourier transform infra-red (FT-IR), UV-VIS-NIR, photoluminescence (PL), micro Raman, and cathodoluminescent (CL) spectroscopy, to determine the differences between a natural diamond (0.30 cts) and a CVD diamond (0.43 cts). The identification of a CVD diamond was difficult when using standard gemological techniques, UV-VIS-NIR, or micro-Raman spectroscopy. However, a CVD diamond could be identified using a FT-IR by the Type II peaks. In addition, we identified a CVD diamond conclusively with the uneven UV fluorescent local bands, additional satellite PL peaks, longer phosphorescence life time, and uneven streaks in the CL images. Our results suggest that using FT-IR combined with UV fluorescent images, PL, and CL analysis might be an appropriate method for identifying CVD diamonds.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.188-192
• /
• 2015

Gemological and spectroscopic properties of HPHT synthetic diamonds from New Diamond Technology (NDT) company in St. Petersburg (Russia) were examined. Their color (colorless, near-colorless with some boron and Fancy blue with high boron content) and clarity ($VVS-SI_1$) grades were comparable to those of top natural diamonds. NDT synthetic diamonds fluoresced and phosphoresced blue or orange under SWUV light. Photoluminescence spectra revealed H3 center with very small intensity and NV centers. The intensity of H3 in NDT synthetic diamond has very weak in comparison with natural one. Using a combination of gemological and spectroscopic tests, gem-quality synthetic diamonds from NDT can be distinguished from natural diamonds of similar quality.

• Transactions on Electrical and Electronic Materials
• /
• v.1 no.2
• /
• pp.12-17
• /
• 2000

Helicon waves were excited by a Nagoya type III antenna in magnetized plasma, and hydrogen and methane are fed through a Mass Flow Controller(MFC). We made a diagnosis of properties of helicon plasma by H$_2$gaseous discharge, and fabricated the diamond thin film. The maximum measured electron density was 1${\times}$10$\^$10/ cm$\^$-3/. Diamond films have been growo on (100) silicon substrate using the helicon plasma chemical vapor deposition. Diamond films were deposited at a pressure of 0.1 Torr, deposition time of 40~80 h, a substrate temperature of 700$^{\circ}C$ and methane concentrations of 0.5~2.5%. The growth characteristics were investigated by means of X-ray Photoelectron (XPS) and X-ray Diffraction(XRD), XRD and XPS analysis revealed that SiC was formed, and finally diamond particles were definitely deposited on it. With increasing deposition time, the thickness and crystallization of the daimond thin film increased, For this system the optimum condition of methane concentration was estimated to near to 1.5%.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.1
• /
• pp.78-83
• /
• 1996

This paper presents the characteristics of surface roughness and cutting force in ultraprecision cutting of aluminium alloy using natural diamond tools whose edge radii are smaller than those of tools made of other materials. The feed rate and depth of engagement were set to be a micrometer order. After measuring the surface roughness of machined surface and cutting force for each cutting condition, the relations between the surface quality and its condition were investigated qualitatively. If the feed rate was under a certain limit, the machined surface quality was deteriorated unexpectedly. This is supposed to have happened due to vibration leading its condition to abnormal one. In a certain situation the machined surface roughness by a natural diamond tool was inferior to that made by a carbide tool whose cutting edge radius is larger. This is supposed to be caused by not normal machining but burnishing effect.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.4
• /
• pp.149-153
• /
• 2017

Recently, significant amounts of gem-quality colorless HPHT synthetic melee diamond have produced for the jewelry industry. Consequently, there have been reports of cases of fraud in the world diamond business. For example, intentionally selling synthetic diamond as natural diamond or intentionally mixing a natural diamond parcel with a synthetic. As a result, the separation of natural from synthetic melee diamonds has become increasingly critical. At present, 10,000 cubic hinge presses are used for the production of synthetic diamond in China. From among these, reportedly 1,000 presses are used for gem-quality diamond production. One press can produce up to 10ct melee-size diamonds in 24 hours. Randomly occurring pinpoint or flux-metal inclusions are diagnostic identification clues. However, some synthetic diamonds require advanced laboratory method for identification. In order to ensure consumer confidence, it is essential to screen melees so as to distinguish all synthetic goods.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.177-180
• /
• 1996

Considerable progress in the development of CVD techniques for the deposition of diamond films has been achieved recently. Despite the polycrystalline structure of this material, its physical properties are now approaching those of natural type IIa diamond crystals. This paper will given some insight into the current status of CVD diamond thechnology with emphasis on optical and thermal applications. The role of process gas impurities like nitrogen will be discussed.

• Analytical Science and Technology
• /
• v.10 no.4
• /
• pp.1073-1080
• /
• 1997

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3540-3545
• /
• 2009

Due to recent development of high temperature high pressure(HTHP) diamond synthetic and treatment technology, we need to identify the natural diamonds fast, reliable, and economically. We proposed using new method of UV fluorescence and X-ray Lang topography imaging for distinguishing one synthetic diamond from four natural colored diamonds. We observe unique local stress field uneven image in synthetic diamond using UV fluorescence and Lang topography characterization, while uniform images in natural diamonds. Especially, X-ray Lang method offered the better identification power with better high resolution on stress field images.