• 한국수자원학회논문집
• /
• 제51권3호
• /
• pp.207-219
• /
• 2018

본 연구에서는 확률밀도함수의 서식처 적합도 지수를 사용하여 도심하천구간과 자연하천구간에서 유량점증방법론(Instream flow Incremental Methodology, IFIM)을 토대로 피라미 서식처의 생태유량을 모의하였다. 이와 같은 방법을 적용하기 위하여 본 연구에서는 PHABSIM 모형을 사용하였다. 본 연구에서는 서식처 적합도 지수(Kang, 2010)를 기초로 확률밀도함수의 매개변수를 조정하여 확률밀도함수의 서식처 적합도 지수를 개발하여 생태유량을 분석하였다. 그 결과, 도심하천구간에서는 정규분포가 자연하천구간에서는 2변수 log-pearson 분포가 Kang (2010)의 생태유량에 가장 근접하는 경향을 보였다. 확률밀도함수에 의한 서식처 적합도 지수와 하천구간별로 생태유량을 모의하여 확률론적 방법을 적용한 생태유량 산정기법을 제안하였다.

• Spatial Information Research
• /
• 제16권3호
• /
• pp.373-383
• /
• 2008

지표면에 대한 정보를 취득하는 기법 중 지금까지 주로 사용되어온 기법은 항공사진 및 위성영상과 같이 평면적인 정보 수집에 중점을 두고 있는 반면, 본 논문에서 다루는 LiDAR(Light Detection And Ranging)는 레이저 측량기술을 이용하여 지표면에 대한 고해상도의 비정규분포 Point 형태의 3차원 정보의 획득이 가능하다. GPS(Global Positioning System) 수신기와 INS(Inertial Navigation System)의 결합을 통해 좌표 값을 제공하게 된다. 이러한 LiDAR의 3차원 Point 정보와 좌표 값을 활용하여 보다 정밀한 3차원 모델링 수행이 가능하다. 본 연구에서는 LiDAR의 반사강도와 기하/지형 자료를 이용하여 도시지역을 대상으로 정밀한 3차원 공간정보자료를 취득하고, 그 자료를 분석하여 도시지역을 높이와 밀도를 기반으로 하여 3차원으로 분류하였다. LiDAR를 통해 획득된 원시자료로부터 지표면에서 반사되는 Point Data의 개수를 지면과 비지면 요소의 비율로 추정하여 지형과 공간적 특성을 파악하고 이에 따라 3차원 토지피복분류도를 작성하였다. 신호의 강약을 구분하는 기준은 통계적 방법(Jenk's Natural Break)을 통해 추정된 값을 사용하였으며, 지표면 반사비율에 따라 세부지역으로 구분하여 크게 고밀도 저밀도 식생지역과 비식생지역으로 구분하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권7호
• /
• pp.2358-2368
• /
• 2011

Density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations, employing the B3LYP method and the LANL2DZ, 6-31G$^*$(LANL2DZ for Tc), 6-31G$^*$(cc-pVDZ-pp for Tc) and DGDZVP basis sets, have been performed to investigate the electronic structures and absorption spectra of the technetium-99m-labeled methylenediphosphonate ($^{99m}Tc$-MDP) complex of the simplest diphosphonate ligand. The bonding situations and natural bond orbital compositions were studied by the Mulliken population analysis (MPA) and natural bond orbital (NBO) analysis. The results indicate that the ${\sigma}$ and ${\pi}$ contributions to the Tc-O bonds are strongly polarized towards the oxygen atoms and the ionic contribution to the Tc-O bonding is larger than the covalent contribution. The electronic transitions investigated by TDDFT calculations and molecular orbital analyses show that the origin of all absorption bands is ascribed to the ligand-to-metal charge transfer (LMCT) character. The solvent effect on the electronic structures and absorption spectra has also been studied by performing DFT and TDDFT calculations at the B3LYP/6-31G$^*$(cc-pVDZ-pp for Tc) level with the integral equation formalism polarized continuum model (IEFPCM) in different media. It is found that the absorption spectra display blue shift in different extents with the increase of solvent polarity.

• 한국산림과학회지
• /
• 제90권5호
• /
• pp.650-662
• /
• 2001

이 연구는 중국 동북부 활엽수-잣나무 천연림의 다섯 가지 임형에 대하여 임분의 생장 모델과 수확 모델을 개발하기 위하여 수행되었다. 연구 자료는 43년생부터 364년생 범위에 이르는 임분에서 0.06ha에서 1.0ha 크기의 359개 임시 표본구와 58I개의 영구 표본구에서 수집되었다. 입지조건을 평가하기 위하여 지위급지수(Site Class Index; SCI)플 도입하였고, 천연혼효림의 임분밀도를 측정하기 위하여 수관경쟁지수(Crown Competition Factor; CCF)를 채택하였다. SCI 공식과 수고-직경 곡선 모델은 Chapman-Richards 함수를 이용하였고, 흉고직경, 흉고단면적, 및 임분재적 모델의 개발은 Schumacher의 생장함수를 기본 모델로 선정하였다. 평균 흉고직경과 흉고단면적 생장 모델에서 Schumacher 함수의 점근매개변수 A는 입지조건(SCI)과 임분밀도(CCF)와 상관관계가 있는 것으로 나타났으며, 비율매개변델수 k는 임분밀도와 관계가 있었고 입지조건과는 무관한 것으로 나타났다. 개발된 생장 모델과 수확 모델로써 예측된 임분 제원들을 평가하기 위하여 별개의 임분 자료를 이용하여 유효성 검정을 실시하였다. 검정 결과, 예측치의 상대평균오차(RME)는 ${\pm}5%$ 미만으로 산출되었고 임분 변수들의 정확도는 모두 95% 이상인 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.311-315
• /
• 2000

A numerical investigation is made of time-dependent buoyant convection in a square of a non-Boussinesq fluid. The density-temperature$({\rho}-T)$ relation is modeled by a quadratic function, with the maximum density ${\rho}_M$ at temperature $T_M$. The horizontal walls of the square are insulated, and a pulsating temperature $T_H=T_M+{\Delta}T'\;sin({\omega}{\tau})$ is imposed on the hot vertical sidewall. The temperature at the cold wall $T_c$ is constant. Extensive numerical solutions to the governing Navier-Stokes equations are portrayed. Resonance is identified by monitoring the amplitude of the mid-plane Nusselt number, $A(Nu^*)$. The primary resonance frequency is found by matching ${\omega}$ to the nondimensional basic mode $N_1$ of internal gravity oscillations. Due to the quadratic$({\rho}-T)$ relationship, the effective pulsation frequency for density, $2{\omega}$, is meaningful, which brings forth the secondary resonance frequency, i.e., $2{\omega}=N_1$

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.9-17
• /
• 1990

When manufacturing beam by laminating particleboards, the mechanical properties of particleboad-laminated beam would be also improved if the properties, especially mechanical properties of particleboad be reinforced. In this study, steel wires were used to reinforce particleboard. This study was carried out to obtain the basic mechanical properties of the board composed of wood particle and steel wires, focusing on bending strength which is the important factors in laminated beam and it was tried to estimate the relationship between the properties of the particleboard-laminated beam. and the proportion of steel wires to wood particles in particleboards. The result obtained can be summarized as follows: 1. The more steel wires used in boards, the higher value of modulus of rupture in bending was obtained, For example. the density 5 board composed of 14 numbers of steel wires showing 55% improved value than control board. 2. The board with lower density was also made better in higher value of elasticity, the density 0.5 board with 14 numbers of steel wires improved by 170%, the density 0.6 board by 86%, the 0.7 board by 37% and the 0.8 board by 26%. 3. The work to maximum load was improved with more steel wires. for example, the density 0.8 board with 14 numbers of steel wires improved by 31%.

• 설비공학논문집
• /
• 제8권3호
• /
• pp.338-350
• /
• 1996

A numerical analysis is carried out to study the two-dimensional steady state natural convection from vertical wires immersed in cold pure water. The surface of the wire is $0^{\circ}C$ unifrom temperature. Results of the analysis are presented for free stream temperature from $0^{\circ}C$ to $25^{\circ}C$ and the aspect ratio N from $5.26{\times}10^{-3}$ to $1.0{\times}10^{-3}$. The effects of the density extremum and aspect ratio on the flow pattern and the heat transfer characteristics are discussed As the aspect ratio N becomes larger, in the range of $1.0^{\circ}C{\leq}T_{\infty}{\leq}4.4^{\circ}C$ and $6{^{\circ}C}{\leq}T_{\infty}{\leq}17^{\circ}C$, the effect of Pr number on the heat transfer is shown to be more significant than the aspect ratio. Investigating into the effect of the density extremum on the heat transfer from wires, the new heat transfer correlations are suggested with the relation of average Nu mumber vs. modified Ra number. Here, the coefficient values C of correlations are presented as the function of density extremum parameter $R^*$. The effects of the density extremum parameter are also discussed.

• 대한조선학회논문집
• /
• 제56권4호
• /
• pp.291-297
• /
• 2019

Polyurethane foam is the most efficient, high-performance insulation material, used for liquefied natural gas carrier (LNGC) insulation. Because LNGC is exposed to sloshing impact load due to ship motion of 6 degrees of freedom, polyurethane foam should be sufficient dynamic properties. The dynamic properties of these polyurethane foam depends on temperature and density. Therefore, this study investigates the dynamic response of polyurethane foam for various temperature($25^{\circ}C$, $-70^{\circ}C$, $-163^{\circ}C$) and density($90kg/m^3$, $113kg/m^3$, $134kg/m^3$, $150kg/m^3$) under drop impact test with impact energy of 20J, 50J, and 80J. For dynamic response was evaluated in terms of peak force, peak displacement, absorb energy, and the mechanical property with minimized density effects. The results show the effect of temperature and density on the polyurethane foam material for the dynamic response.

• 한국표면공학회지
• /
• 제52권1호
• /
• pp.23-29
• /
• 2019

Electrolytic corrosion of the ship's hull can be occurred due to stray current during welding work using shore power and electrical leakage using shore power supply. The electrolytic corrosion characteristics were investigated for Al5083-H321 through potentiodynamic polarization and galvanostatic corrosion test in natural seawater. Experiments of electrolytic corrosion were tested at various current densities ranging from $0.01mA/cm^2$ to $10mA/cm^2$ for 30 minutes, and at various applied time ranging from 60 to 240 minutes. Evaluation of electrolytic corrosion was carried out by Tafel extrapolation, weight loss, surface analysis after the experiment. In the electrolytic corrosion characteristics of Al5083-H321 as the current density increased, the surface damage tended to proportionally increase. In the current density of $0.01mA/cm^2$ for a applied long time, the damage tended to grow on the surface. In the case of $10mA/cm^2$ current density for a applied long time, the damage progressed to the depth direction of the surface, and the amount of weight loss per hour increased to 4 mg/hr.

• Natural Product Sciences
• /
• 제6권4호
• /
• pp.155-160
• /
• 2000

Testosterone deficiency increased bone resorption, giving rise to osteoporosis. Testosterone deficiency also increased lipid peroxidation and free radical formation. Free radicals have been shown to be toxic to osteoblasts as well as to activate osteoclasts. In this study, the effects of giving an antioxidant, i.e. vitamin E-rich extract from palm oil on bone mineral density and calcium content was studied. Palm vitamin E prevented the loss in bone mineral density due to orchidectomy, seen in the whole femur, proximal amd midshaft regions, as well as L4 vertebra. Similar observations were seen in bone calcium content of the L5 vertebra. Giving palm olein also prevented the loss in bone mineral density in the femoral midshaft and L4 vertebra; and bone calcium content in the L5 vertebra. In conclusion, vitamin E-rich extract from palm oil was effective in preventing the loss in bone mineral density and calcium content of orchidectomized male rats. This action is probably due to its role as an antioxidant.