• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.10a
• /
• pp.63-70
• /
• 2003

This study investigates the seismic responses of two structures connected by sky-bridges equipped with viscoelastic dampers (VED) in the bridge-building connections. The applicability of the method is verified first by computing RMS responses of two-degrees-of-freedom systems subjected to white noise ground excitation. Then model structures with various number of stories are analyzed using EL CENTRO earthquake excitation to observe the effect of the varying size of VED on reduction of responses. According to the analysis results, there exists a proper size of VED which minimizes the structural responses. It is also observed that the effectiveness of VED increases as the difference of natural frequencies between the two connected structures increases.

• Structural Engineering and Mechanics
• /
• v.23 no.1
• /
• pp.1-13
• /
• 2006

Structural cracks may cause variations in structural stiffness and thus produce bilinear vibrations to structures. This study examines the dynamic behavior of structures with breathing cracks. A generalized algorithm based on the finite element method and bilinear theory was developed to study the influence of a breathing crack on the vibration characteristic. All the formulae derived in the time domain were applied to estimate the period of the overall bilinear motion cycle, and the contact effect was considered in the calculations by introducing the penetration of the crack surface. Changes in the dynamic characteristics of cracked structures are investigated by assessing the variation of natural frequencies under different crack status in either the open or closed modes. Results in estimation with vibrational behavior variation are significant compared with the experimental results available in the literature as well as other numerical calculations.

• Structural Engineering and Mechanics
• /
• v.57 no.2
• /
• pp.221-238
• /
• 2016

One of the objectives of this study is to implement the direct calculation of the torsional moment of inertia for non-circular cross-sections, which is based on the St. Venant torsion formulation and the finite element method. Recently the proposed method provides a unique calculation of the torsional rigidity of simply and multiply connected cross-sections. Next, free vibration analyses of cylindrical and non-cylindrical helices with non-circular cross-sections are solved by a curved two-nodded mixed finite element based on the Timoshenko beam theory. Some thin-thick closed or open sections are handled and the natural frequencies of cylindrical and non-cylindrical helices are compared with the literature and the commercial finite element program SAP2000.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.519-527
• /
• 1987

Simple procedures have been formulated to compute approximate natural frequency of nonlinear systems by the use of variational principle. These procedures are applicable to motion of large amplitudes, even to systems which are not linearizable. The results obtained by these procedures have been found to have good agreements with computer solutions and exact solutions for systems having piece-wise linear springs and polynomial springs.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.340-347
• /
• 1999

The acoustic performance of reactive type single expansion chamber can be calculated theoretically by plane wave theory. But higher order model should be considered to widen the frequency range. Mode matching method has been developed to consider higher order modes, but very complicated algebra should be used. Munjal suggested a numerical collocation method, which can overcome the shortcomings of mode matching method, using the compatibility conditions for acoustic pressure and particle velocity at the junctions of area discontinuities. But the restriction of Munjal's method is that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In this paper, the new method was suggested to overcome the shortcomings of Munjal's method. The predictions by this method was also compared with those by the finite element method and Munjal's method in order to demonstrate the accuracy of the modified method presented here.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.2
• /
• pp.29-37
• /
• 1994

In this paper the modelling procedure and analysis technique for the prediction of accurate critical speeds of marine propeller shafts are suggested. As a solution method the transfer matrix method is employed to calculate the critical speeds, which are correspond to natural frequencies of the shaft in lateral vibration, and whirling responses. Furthermore, in order to check the validity of the simple prediction formulae, such as Jasper's formula and Panagopulos's formula, numerical calculations were performed. From the numerical results it was found that the critical speed of the propeller shaft is sensitive to the position and the supporting conditions of journal bearings.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.1
• /
• pp.37-44
• /
• 2019

Yangjindang house, which is located in Sang-ju province of South Korea, is one of the special Hanok structures dated back to Joseon dynasty. This study aims to examine structural safety of the Yangjindang wood frame building considering dynamic parameters such as the natural frequency and damping ratio. The numerical model of the wood frame building is implemented using Midas Gen, especially the wood joint where column and beam were connected. The behavior of the actual frame building was compared with the modeling results. In addition, structure responses such as shear force, axial force, flexural moment and deflections were calculated and compared with the allowable limits. Numerical results show that, generally, despite of some local members shear failure, Yangjindang's structural response does not exceed the limitation according to current standards.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.10
• /
• pp.16-23
• /
• 2020

Vehicle seats provide a comfortable ride for passengers by properly absorbing vibrations and shocks transmitted during driving. Vibration analyses on three models with different shapes were carried with the same material properties and constraint conditions. By varying the height of the seat-back, models 1, 2, and 3 were designed according to the inclined angle of the seat-back frame. Models 1, 2, and 3 were modeled with relatively simple designs using CATIA. The areas touching the buttocks of passengers show the most deformation. This work shows that seat durability and stability can vary depending on the shape of the seat design.

• Advances in concrete construction
• /
• v.14 no.5
• /
• pp.309-315
• /
• 2022

This paper depicts the diagram of cylindrical shells as an essential idea. It centers around an outline of exploration and use of cylindrical shell in expansive current circumstance. In view of investigation of the current and prospect of model as a piece of present exploration work, a straightforward contextual analysis is examined with Love's shell theory based on Galerkin's method. The cylindrical shells are attached from one end of the cylindrical shells. The frequencies of ring support shells are investigated against the half axial wave mode. The frequencies increase on increasing the half axial wave mode. Also, the frequencies are downsized with ring supports. The software MATLAB is preferred to others because in this software computing coding is very easy to do. Just single command 'eig' furnishes shell frequencies and mode shapes by calculating eigenvalues and eigenvectors respectively. The shell vibration frequencies for cylindrical shells are compared with those results found in the open literature.

• Computers and Concrete
• /
• v.32 no.2
• /
• pp.165-172
• /
• 2023

The vibration analysis of armchair, zigzag and chiral double-walled carbon nanotubes has been developed by inserting the nonlocal theory of elasticity into thin shell theory. First Donnell shell theory is employed while exercising wave propagation approach. Scale effects are realized by using different values of nonlocal parameters under certain boundary conditions. The natural frequencies have been investigated and displayed for various non-local parameters. It is noticed that on increasing nonlocal parameter, the frequency curve tends to decrease. The frequency estimates of clamped-free boundary condition are less than those of clamped-clamped and simply supported computations. The frequency comparisons are presented for armchair, zigzag and chiral nanotubes. The software MATLAB is used to extract the frequencies of double walled carbon nanotubes.