• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.565-581
• /
• 2003

Statement of problem : A scientific examination and understanding of overall aspects of the natural dentition is the first step involved in making a satisfactory selection in the shade of an aesthetic prosthesis. Proper natural shade selection of the prosthetic restoration that is in harmony with the remaining dentition is as important aesthetically, as harmony of form and function in the anterior dentition. Clinically, the most commonly applied method of shade selection has been visual, but because of the subjective nature inherent to this method, shade selection results are variable and can be influenced by such factors as the technician, the type of shade guide used, and the type and intensity of the lighting. Purpose : The purpose of this study was to develop a more objective and scientific approach to examining and understanding the shade of teeth, which has in turn lead to the development of a number of shade analysis devices that present a more objective method of shade analysis. Material and Method : In this study, the shades of healthy anterior teeth were examined and analyzed using the recently developed digital shade analysis of the $ShadeScan^{TM}$ System. The study examined 80 individuals in their twenties, 40 males and 40 females, presenting 6 healthy, unrestored maxillary anterior teeth. Tooth brushing and oral prophylaxis were performed prior to evaluation. The ShadeScan handpiece was used to acquire images of the 6 maxillary anterior teeth. These images were analyzed using the Vita/Classical mode of the $ShadeScan^{TM}$ Software, and shade maps of each tooth were acquired and divided into cervical, middle, and incisal thirds. The shade distribution of each third, left and right symmetry, and gender differences were investigated and analyzed. Results : The results of the study are as follows : 1. An overwhelming majority of the examined teeth were found to possess shades belong to Group A, with the greatest variations occurring at the middle and cervical thirds of the maxillary central and lateral incisors, in both male and female subjects. 2. Canines of both male and female subjects showed left and right symmetry with uniform shade distribution of A4 and C4, while the lateral and central incisors showed left-right symmetry of the incisal 1/3 with a uniform shade distribution of A2 and A3 shades 3. No significant differences in shade distribution were seen between genders in maxillary canines, whereas maxillary central and lateral incisors showed differences at the middle and cervical thirds between male and female subjects The results of this study show that with the exception of maxillary canines, maxillary anterior teeth display a diverse shade distribution as well as gender differences. Conclusion : Clinically, when making a shade selection using the existing shade guide, one must consider the fact that even a single tooth consists of a variety of shades. The results of this study show that when selecting a shade from a number of groups is difficult, shades from A group are the most consistent with the natural shade or maxillary anterior teeth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.29 no.2
• /
• pp.147-160
• /
• 1991

The purpose of this study was to examine, by the method of finite element analysis, how implant geometry with or without connection between natural tooth and osseointegrated abutments affected the stress distribution in surrounding bone and osseointegrated prosthesis. The mandibular first and second molars were removed and the two osseointegrated implants were placed in the first and second molar sites. Stress analysis induced by prostheses with connection(Model A)or without connection(Model B) between natural tooth(second bicuspid) and two osseointegrated abutments(first molar and second molar) was performed under vertical point load(Load P1) or distributed point load(Load P2). The results were as follows; 1. Under vertical point load, mesial tilting was shown in both Model A and Model B and inferior displacement of Model A was greater than that of Model B in the second bicuspid. 2. Under vortical point load, the first and second molars showed mesial tilting in both Model A and Model B, and inferior displacement of them was similar in Model A and Model B and was less than that of the second bicuspid. 3. Under distributed point load, mesial displacement was shown in Model A and Model B and inferior displacement of Model A was less than that of Model B in the second bicuspid. 4. Under distributed point load, mesial tilting was shown and inferior displacement of Model A was similar to that of Model B in the first and second molars. 5. In Model A under vertical point load, high stress was concentrated in the corneal portion of first molar and distributed throughout the second molar and the second bicuspid, and the stress distribution of the second molar was greater than that of the second bicuspid. 6. In Model B under vertical point load, high stress was concentrated in the coronal and mesio-cervical portion of the first molar. 7. In Model A under distributed point load, high stress was concentrated in the mesio-cervical portion of the first molar and evenly distributed throughout the second molar and the second bicuspid. 8. In Model B under distributed point load, high stress was concentrated in the disto-cervical portion of the second bicuspid and evenly distributed throughout the first and second molars.

• The korean journal of orthodontics
• /
• v.33 no.3 s.98
• /
• pp.157-167
• /
• 2003

The purpose of this study was to find whether there is a correlation between tooth size and jaw size. Dental stone models and cephalometric radiographic films of 87 untreated individuals were evaluated. Repeated measurements of the maximum mesiodistal width of the teeth were taken by means of a digital vernier caliper. Linear measurements of jaw size were assessed by means of a digitizer and Visual C++ program. All measurements were taken separately according to the subject's gender. To determine the relationship between jaw and tooth size, the Pearson correlation was used. The results were as follows: 1. Male and female subjects showed a statistical difference in regard to tooth size and jaw size 2. In contrast to the results of the male subjects, there were no statistically significant correlations between maxillary size and maxillary teeth size in female subjects 3. In male subjects, the two maxillary sizes of PTM vert-ANS vert (FH plane) and PTM vert-A yen (palatal plane) were significantly correlated with themaxillary teeth size. Especially, the size of the upper central incisor showed significant correlation with all maxillary sizes. 4. In both male and female subjects, mandibular size B vert- Point J vert (mandibular plane) showed significant correlation with mandibular teeth size. As gleaned kom the results of this study, the relationship between jaw size and tooth size was fair or little in natural occurring good occlusion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.1
• /
• pp.10-20
• /
• 2012

Purpose: The purpose of this study was to investigate the stress distribution in mandibular implant-supported overdentures and tooth-supported overdentures with telescopic crowns. Materials and methods: The assumption of this study was that there were 2, 3, 4 natural teeth and implants which are located in the second premolar and canine regions in various distributed conditions. The mandible, teeth (or implants and abutments), and connectors are modeled, and analyzed with the commercial software, ANSYS Version 10.1. Stress distribution was evaluated under 150 N vertical load bilaterally on 3 experimental conditions - between canine areas, canine and $2^{nd}$ premolars, 10 mm posterior to $2^{nd}$ premolars. Results: Overall, the case of the implant group showed more stress than the case of the teeth group in stress distribution to bone. In stress distribution to superstructures of tooth and implants, there was no significant difference between TH group and IM group and the highest stress appeared in TH-IV and IM-IV. The stress caused from bar was much higher than those of implant and tooth. TH group showed less stress than IM group in stress distribution to abutment teeth and implant. Conclusion: The results shows that it is crucial to make sure that distance between impact loading point and abutment tooth does not get too far apart, and if it does, it is at best to set abutment tooth on premolar tooth region. It will be necessary to conduct more experiments on effects on implants, natural teeth and bone, in order to apply these results to a clinical treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.64-75
• /
• 2019

The purpose of this study was to obtain instructions for size selection of prefabricated crown and tooth reduction by 3-dimensional analysis of the size and shape of the maxillary primary central and lateral incisors and prefabricated crowns (celluloid strip, resin veneered stainless steel, and zirconia crowns). The maxillary primary central and lateral incisors of 300 Korean children was scanned with three types of prefabricated crown to create standard three-dimensional tooth models and prefabricated crowns. The shapes of the prefabricated crowns and natural teeth were compared according to four parameters (mesio-distal width, height, labio-palatal width, and labial surface curvature coefficient) and calculated the amount of tooth reduction required for each prefabricated crown. The size 2 resin veneered stainless steel crown, size 1 zirconia crown, and size 2 celluloid strip crown were most similar in shape to the primary central incisor. The size 3 rein veneered stainless steel crown, size 2 zirconia crown, and size 3 celluloid strip crown were most similar to the primary lateral incisor. The amount of tooth reduction was similar in both maxillary primary central and lateral incisors. The incisal reduction was greatest for the zirconia crown. At the proximal surface, the zirconia and celluloid strip crowns required a similar amount of tooth reduction, but more than the resin veneered stainless steel crown. The labial surface reduction was greatest for the zirconia crown. The degree of lingual surface reduction was not significant among the three prefabricated crowns. Among the assessment parameters, mesio-distal crown width was the most important for choosing a prefabricated crown closest to the actual size of the natural crown.

• Journal of Technologic Dentistry
• /
• v.2 no.1
• /
• pp.35-38
• /
• 1980

이 기술은 레진(acrylic resin) 또는 의과용 도재(dental porcelain)에 의한 치아 색깔의 전장부위를 갖고 있는 금속구치 block(metal posterior tooth block)의 개조에 대한 기술의 일면이다. 이 기술은 모든 가철식 보철물(removable dental restoration)에 적용할 수 있으며 특히 자연치열(natural dentition) 대합치에 가철식 국부의치(removable partial denture)를 갖고 있는 만성 이갈음 환자(chronic bruxing patient)에 적용할 수 있다.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1842-1850
• /
• 2017

Reducing the noise and vibration of the BLDC motors is very essential for some special applications. In this paper, a new structural design is introduced to increase the natural frequencies of the stator in BLDC motors as increasing the natural frequencies can reduce the severe effects of the structural resonances, including high levels of noise and vibration. The design is based on placing a single hole on definite regions at the stator cross sectional area (each region contains one tooth and its upper parts in the stator yoke) in an optimum way by which the natural frequencies at different modes are shifted to the higher values. The optimum diameter and locations for the holes are extracted by the Response Surface Methodology (RSM) and the modal analyses in the iterative process are done by Finite Element Method (FEM). Moreover, the motor performance by the optimum stator structure is analyzed by FEM and compared with the prototype motor. Preventing the stator magnetic saturation and the motor cogging torque enhancement are the two constraints of the optimization problem. The optimal structural design method is applied experimentally and the validity of the design method is confirmed by the simulated and experimental results.

• Korean Journal of Veterinary Service
• /
• v.30 no.3
• /
• pp.459-466
• /
• 2007

The Korean Musk deer (Moschus Moschiferus) is endangered due to heavy hunting and Massive destructions of natural habitat. They are included in CITES appendix II. In addition they are designated as a precious natural product in 1968 and listed as endangered species by the Government and Cultural Heritage Administration. At present, the number of musk deer in Korea is smaller than minimum viable population. Without increment of the population size, natural restoration is impossible. It is necessary to develop the artificial growth and re-enforcement methods in order to conservation Korean musk deer. Furthermore, It is necessary to ensure that we have an adequate individual group for artificial growth and re-enforcement. To ensure that we have an adequate individual group, it is necessary to know ecology of musk deer. This study is conducted to confirm and investigate of habitat of musk deer in order to capture individual musk deer. we investigated, confirmed habitats, found traces and captured using trap and decoy. Captured musk deer is male and 5.5 kg, this have canine tooth of 1.5cm, is estimated 15 months old. After capture, we measured each parts of body and tested to research of parasite infection. Strongyloides papillous was founded in the feces. It is essential to get healthy individual and establish of artificial growth technique.

• Molecules and Cells
• /
• v.20 no.3
• /
• pp.325-330
• /
• 2005

Ancient cattle bones were excavated from archaeological sites in Jeju, Korea. We used molecular genetic techniques to identify the species and establish its relationship to extant cattle breeds. Ancient DNA was extracted from four sources: a humerus (Gonae site, A.D. 700-800), two fragments of radius, and a tooth (Kwakji site, A.D. 0-900). The mitochondrial DNA (mtDNA) D-loop regions were cloned, sequenced, and compared with previously reported sequences of various cattle breeds (9 Asian, 8 European, and 3 African). The results revealed that these bones were of the breed, Bos taurus, and a phylogenetic tree indicated that the four cattle bones formed a monophyletic group with Jeju native black cattle. However, the patterns of sequence variation and reports from archaeological sites suggest that a few wild cattle, with a different maternal lineage, may have existed on Jeju Island. Our results will contribute to further studies of the origin of Jeju native cattle and the possible existence of local wild cattle.

• The Journal of the Korean dental association
• /
• v.58 no.1
• /
• pp.45-49
• /
• 2019

Korean society is experiencing a very rapid change in population aging. Oral diseases, including dental caries and periodontal disease, are usually cumulative and make oral health worse with age. Preventing tooth loss through the prevention and treatment of caries and periodontal diseases are essential for retaining oral function later in life. This study aimed to identify the trend in oral health status among elderlies over 65 years old, using major oral health indicators of Health Plan 2020. The fifth, sixth, and seventh Korea National Health and Nutrition Examination Survey (KNHANES V, VI, VII) were used in the present study to estimate the number of remaining natural teeth, the rate of 20 or more natural teeth, the rate of chewing difficulty, and the rate of oral health check-up of elderly. The number of remaining natural teeth increased from 15.6 in 2010 to 17.1 in 2015, and the rate of 20 or more natural teeth also increased from 45.8% in 2010 to 53.7% in 2015. The rate of chewing difficulty was similar but declined a little from 44.3% in 2010 to 42.9% in 2017. Finally, the rate of oral health check-ups of the elderly increased significantly from 12.2% in 2010 to 21.1% in 2017.