• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.5
• /
• pp.67-72
• /
• 1997

The purpose of this study os to investigate how the natural gas in fuel blend influences the polutant emission of diesel engine. Four stroke cycle single cylinder engine is used for this experiment and four kind of fuel blends were made. Fuel blends show four different torque ratios between diesel oil and natural gas, which are 4 : 0. 3 : 1, 2 : 2 and 1 : 3. The constituents of exhaust gases of engine are analyzed for every fuel blend. The experimental results say that the mixing of natural gas into diesel fuel is an very effective way to reduce the amount of soot in the exhaust gas.

• Journal of Aerospace System Engineering
• /
• v.10 no.3
• /
• pp.59-62
• /
• 2016

In this study, an investigation was performed on the mechanical properties of the natural-fiber-composite structure. The specimen was manufactured using the Vacuum Assisted Resin Transfer Molding (VARTM) method. The flax-fiber materials were adopted for the natural fiber composite, and vinyl-ester resin was also adopted. After a manufactured specimen was obtained, a mechanical test was carried out. The mechanical properties of the experiment results were compared with those of the natural-composite data cited from a number of other references.

• Progress in Superconductivity and Cryogenics
• /
• v.15 no.3
• /
• pp.49-52
• /
• 2013

An experiment to investigate the natural circulation of a cryogen has been performed. The study is motivated mainly by our recent development of cryogenic cooling system for prototype superconducting cyclotron without any circulating pump. In the natural circulation loop system, a cooling channel is attached on the outer surface of the aluminium block and the liquid nitrogen passes through inside of the channel to cool the block indirectly. A cryocooler as a heat sink is located at the top to re-condense cryogenic vapor coming from the aluminium block in which electrical heater is installed as a heat source. The main dimensions are determined using the relevant analysis and the natural circulation loop is successfully fabricated. The temperature distributions in the loop are measured during initial cool-down process and in steady state, from which the modified Grashof numbers are calculated and compared with the existing correlation estimated with one-dimensional analysis for steady state flow.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.546-551
• /
• 2016

In this study, capping with recycled aggregate and natural zeolite in marine sediment was performed to investigate its inhibitory effect on pollutants released from sediment to seawater. An experiment was performed by capping with amendments for 60 days, and concentrations of organic matter (COD), nitrate, phosphate and metallic elements (Ni, Zn, Cu, Pb, Cd, As, and Cr) were measured. Two capping materials effectively suppressed pollutant release. Recycled aggregate showed better effectiveness for organic pollutant, nitrate and phosphate release. Meanwhile, natural zeolite was effective for metallic elements. As a result, recycled aggregate and natural zeolite can be considered as cost-effective/inexpensive capping material candidates. Also, the capping material can be selected according to the target pollutant.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2004.04a
• /
• pp.134-135
• /
• 2004

• Journal of the Korean Society of Visualization
• /
• v.20 no.1
• /
• pp.29-37
• /
• 2022

We carried out a laboratory experiment about the thermo-fluidic characteristics of natural convection boundary layer over a vertical heated plate under constant heat flux condition. Particle image velocimetry has been applied to observe the surface convection velocity close to the vertical plate submerged in the water chamber with the condition of Ra = 7 × 10⁹ and Pr = 8.1. The velocity distributions indicate that the distinct stripe-like structures appears in the upstream (earlier transition region) and the distinct negative-positive and Λ(λ)-shaped flow structures in the downstream (mid-transition region). In addition, the temporal variation of spanwise and streamwise velocity is also presented.

• Journal of the Korean Society of Tobacco Science
• /
• v.4 no.2
• /
• pp.37-39
• /
• 1982

This experiment was conducted to obtained basical source for gathering seeds in flue- cured (NC 2326), and to investigate some characters on the relation to gathering number of capsules per a plant; amount of gathering seeds, weight per 1000 seeds and germination rate, respectively. As a results; correlation coefficient of number of capsules and amount of gathering seeds was pros(live correlation (r =0.9771**) , Weight per 1000 seeds (0.16g) was good from 39$\pm$2 capsules and amount of gathering seeds was 4.8g. So it is considered that method of gathering seeds wise proved to be a desirable 39: 2 capsules and amount of gathering seeds was 4- 5 gram.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2001.05a
• /
• pp.220-221
• /
• 2001

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.3
• /
• pp.46-57
• /
• 1995

The aim of the present study is to provide fundamental informations for the development of magneticfluid actuator. To achieve the aim, oscillation characteristics of the magneticfluid plug are investigated by experiment for the various length and position of the magneticfluid plug and the frequency of magnetic field. The oscillation characteristics are obtained. Amplitude, natural frequency, phase shift and damping ratio, are compared with theoretical values. From the study, the following conclusive remarks can be made. The experimental equation for the magnetic field is obtained. The critical magneticfluid length exists and its value is about 70mm. The range of the damping ratio and fluid loss coefficient obtained by experiment are 0.1~0.2 and 30~100, respectively. Comparison between experimental and theoretical results of oscillation characteristics shows good agreement in the high frequency range. Meanwhile, in the low frequency range, there appears little discrepancies(5% in the frequency and amplitude and 10% in phase difference and damping ratio) with each other.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1394-1397
• /
• 2005

The object of this study was to design of micro stage, which is one of the equipments embodied in ultra precision positioning mechanism. Design factors for micro stage were decided a roundness of hinge, a thickness of hinge, a thickness of stage, a length of arms and a clearance of division. To obtain the $1^{st}$ natural frequency and equivalent stresses, FEM simulation was performed using the table of orthogonal arrays and Taguchi method was used to determine the optimal design parameters. As results of this study, the size of 1st natural frequency and equivalent stresses on micro stage was influenced significantly by a thickness of hinge and a length of arm.