• Title/Summary/Keyword: Natural Element Method

검색결과 1,153건 처리시간 0.031초

연속체 암반비탈면의 강도정수 산정 연구 (A Study on Estimating Shear Strength of Continuum Rock Slope)

  • 김형민;이수곤;이벽규;우재경;허익;이준기
    • 한국지반공학회논문집
    • /
    • 제35권5호
    • /
    • pp.5-19
    • /
    • 2019
  • 암반으로 구성되어 있는 급경사($65^{\circ}{\sim}85^{\circ}$)비탈면이 장기간 안정한 상태로 유지되고 있는 자연현상을 고려할 때, 설계 및 초기 시공 단계에서 위와 유사한 지반 상태로 이루어진 깎기 암반비탈면에 대해 1:0.5(발파암 경사 기준)보다 급한 경사를 적용할 수 있을 것이다. 급경사로 설계 가능한 양호한 연속체 암반비탈면의 안정성을 검토하는 과정에서, 설계실무 측면에서 범용적인 암반강도정수 산정방법이 필요하게 되었다. Hoek 등(2002)이 수정 보완하여 발표한 Hoek-Brown 파괴기준과 GSI분류는 불연속구조의 영향을 충분히 고려한 암반특성화 시스템으로 평가되었으며, 응력변화에 따라 등가 Mohr-Coulomb 강도정수(등면적법)를 산출하는 방법을 제안하였다. 비탈면에서는 등가 M-C 강도정수가 최대구속응력(${{\sigma}^{\prime}}_{3max}$ 또는 수직응력)변화에 따라 민감하게 변화하므로 실무적으로 활용하기에 어려운 점이 있다. 이 연구에서는 양호한 연속체 암반비탈면에 대해 최대구속응력 범위이내에서 범용적으로 적용할 수 있는 강도정수산정방법(등각분할법)을 H-B 파괴기준을 응용하여 제안한다. 등각분할법 강도정수(A)의 타당성 및 적용성을 평가하기 위해, 연구대상 암반비탈면을 기존 실시설계 현장 인근에 있는 급경사 비탈면에서 암석종류별(화성암, 변성암, 퇴적암)로 선정하고, Hoek이 제시한 등가 M-C 강도정수(등면적법)들과 비교 분석하였다. 등면적법 및 등각분할법 등가 M-C 강도정수는 기본적인 자료인 기존 실시설계 현장의 실내 암석 삼축압축시험과 연구대상 암반비탈면의 불연속구조의 특성조사(Face Mapping)를 통해 RocLab 프로그램(H-B 파괴기준을 기본으로 전산화된 지반정수 산정 소프트웨어)을 활용하여 산정하였다. 산정된 등면적법 등가 M-C 강도정수는 상호 연동되어 점착력과 내부마찰각이 아주 크거나($45^{\circ}$ 이상) 작게 나타났다. 등각분할법 등가 M-C 강도정수는 등면적법 등가 M-C 강도정수의 중간 정도이며, 내부마찰각은 $30^{\circ}{\sim}42^{\circ}$의 범위를 보인다. 연구대상 암반비탈면의 등각분할법 강도정수(A)와 기존 실시 설계 현장에서 연구대상 암반비탈면과 유사한 암반상태(동일 등급 RMR)에 적용한 강도정수(B)와 비교 분석하고, 이 지반정수들로 적용한 비탈면 안정해석(한계평형해석과 유한요소해석) 결과를 통해 제안한 등각분할법의 적용성을 간접적으로 평가하였다. A와 B의 강도정수 차이는 10% 정도이다. 한계평형해석 결과(우기 기준), A적용 안전율(Fs)=14.08~58.22(평균 32.9), B적용 안전율(Fs)=18.39~60.04(평균 32.2)이며, 각 동일한 암석종류에 따라 상호 유사하게 나타났다. 유한요소 해석 결과, A적용 변위=0.13~0.65mm(평균 0.27mm), B적용 변위=0.14~1.07mm(평균 0.37mm)으로 매우 유사하다. H-B 파괴기준을 응용하여 등각분할법으로 산출한 지반 정수를 실무적인 전단강도로 적용할 수 있는 적용성 평가에서 유의미한 결과를 확인할 수 있었다.

생물개스 발생시스템을 위한 지하매설콘크리트 다이제스터의 열전달에 관한 연구 (Study on the Heat Transfer Phenomenon around Underground Concrete Digesters for Bigas Production Systems)

  • 김윤기;고재균
    • 한국농공학회지
    • /
    • 제22권1호
    • /
    • pp.53-66
    • /
    • 1980
  • The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

  • PDF

변형물체 시뮬레이션을 활용한 비 마커기반 증강현실 시스템 구현 (Implementation of Markerless Augmented Reality with Deformable Object Simulation)

  • 성낙준;최유주;홍민
    • 인터넷정보학회논문지
    • /
    • 제17권4호
    • /
    • pp.35-42
    • /
    • 2016
  • 최근 제한적인 마커기반 증강현실의 여러 가지 단점들을 보완하기 위해 사용자의 얼굴, 발, 손 등을 활용한 비 마커기반 증강현실 시스템에 관한 연구들이 활발하게 진행되고 있는 추세이다. 또한 대부분의 기존 증강현실 시스템들은 사용자에게 보여주는 것과 기본적인 상호작용에 목표를 두고 강체를 증강하여 수행되는 경우가 많았다. 본 논문에서는 단지 보여주는 것에 국한되는 것이 아니라 여러 분야에서 활용이 가능한 변형물체를 사용자와의 상호작용을 바탕으로 시뮬레이션을 제공하는 비 마커기반의 증강현실 시스템을 설계 및 구현하였다. 변형물체는 질량-스프링 모델, 유한 요소 모델 두 가지 방법을 주로 사용하여 구현한다. 질량-스프링 모델은 실시간 시뮬레이션에 장점이 있으며 유한 요소 모델은 변형물체의 정밀함을 나타낼 때 장점을 가진다. 본 논문에서는 실시간으로 시뮬레이션을 목표로 하고 있기 때문에 질량-스프링 모델을 기반으로 하는 테트라헤드론 구조를 이용하여 변형물체를 구현하였다. 변형물체의 자연스러운 움직임을 실시간으로 시뮬레이션하기 위해 키넥트 SDK를 통해 사용자의 손의 위치를 추적 하고, 손의 위치 변화량을 바탕으로 힘을 계산한다. 이를 바탕으로 $4^{th}$ order Runge-Kutta Integration 수치적분법을 이용하여 물체의 다음 위치를 계산하여 시뮬레이션 하도록 하였다. 그리고 자연스러운 동작을 표현하기 위해서 사용자의 손을 통해 물체에 작용하는 힘이 너무 많이 작용하지 않기 위해 제스처에 임계값을 정하였으며 해당 임계값을 넘는 힘이 작용할 경우 임계값으로만 적용되도록 설정하였다. 각 실험을 5회씩 반복하였으며 실험에 따른 시뮬레이션 연산속도를 분석하였다. 본 논문을 통해 구현한 변형물체를 활용한 비 마커기반 증강현실 시스템을 바탕으로 기존의 강체 기반의 증강현실에서 활용하기 힘들었던 의료, 교육 및 다양한 방면으로 시뮬레이션이 가능할 것으로 기대한다.

텔레스코픽 크라운 임플란트 지지 피개의치와 치아 지지 피개의치의 하악골내 응력분포에 관한 유한요소분석 (A FEM study on stress distribution of tooth-supported and implant-supported overdentures retained by telescopic crowns)

  • 백장현;이창규;김태훈;김민정;김형섭;권긍록;우이형
    • 대한치과보철학회지
    • /
    • 제50권1호
    • /
    • pp.10-20
    • /
    • 2012
  • 연구 목적: 이 연구의 목적은 텔레스코픽 크라운 하악 임플란트 지지 피개의치와 치아 지지 피개의치에서 지대치의 수와 위치에 따른 응력 분산을 비교하기 위함이다. 연구 재료 및 방법: 본 연구에서는 임플란트를 4개 식립하고 임플란트 지지 피개의치로 설계하였고, 식립 위치를 견치와 소구치 부위에 위치 별로 3개 또는 2개존재시를 실험군으로 설정하였다. 자연치아를 갖는 경우도 견치와 제2소구치 4개를 가진 경우를 대조군으로 설정하고 부위별로 3개 또는 2개를 가지는 경우를 실험군으로 설정하였다. ANSYS Version 10.1(Swanson, Inc., USA)로 분석하였다. 결과: 악골내 응력의 경우, 전반적으로 임플란트(IM)로만 구성된 경우가 치아(TH)로만 구성된 경우에 비해 응력이 크게 발생하였다. 상부구조의 경우, 치아군(TH)과 임플란트군(IM) 사이의 차이는 크게 없었으며 편측 견치와 제2소구치에 지대치 또는 임플란트가 위치하는 경우 가장 큰 응력이 나타났고 바(bar)에서 발생된 응력이 임플란트와 치아에서 발생되는 응력에 비해 상대적으로 훨씬 크게 발생하였다. 지대치와 임플란트의 경우, 치아군(TH)이 임플란트군(IM)보다 응력이 작게 발생하였다. 결론: 본 연구의 결과로부터 지대치(임플란트 또는 치아)를 설정할 때는 하중작용점과 지대치 사이의 거리가 너무 길어지지 않도록 지대치의 수와 위치를 확보해야 하며 소구치 자리에 지대치를 확보하는 것이 유리하다. 앞으로, 실제 임상에 적용하였을 경우, 임플란트 및 자연치아와 악골에 미치는 결과에 대한 연구가 더 필요할 것으로 생각된다.

교사환경기준에 관한 연구 (A Study on Environmental Standards of School Building)

  • 홍석표;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.11-43
    • /
    • 2000
  • The purpose of this study was, through analyzing the previous researches, to grasp the present status of environment of school building(ESB), research the sundry records of each element and, through comparative analysis of the standard of ESB in Korea, the United States, and Japan, select the normative standard of ESB, to clarify the point at issue presented in Regulation of Construction & facility Management for Elementary and and Secondary School in Korea, and to suggest an alternative preliminary standard of ESB. To carry out a research for this purpose, these were required: 1. to investigate the existing present status of ESB, 2. to make a comparative analysis of the standard of ESB in each country, 3. to suggest the normative standard of preliminary standard of ESB, 4. to analyze the controversial points of the standard of ESB in Korea, 5. to suggest an alternative preliminary standard of ESB. The conclusions were as follows: 1. Putting, through analyzing the previous researches, the existing present status of ESB together, it seemed that lighting environment, indoor air environment and noise environment were all in poor conditions. 2. In the result of a comparative analysis of the standard of ESB in Korea, Japan and the United States, in Korea the factors of each lighting and indoor air environment were not presented properly, in Japan, in lighting environment aspect, the standard on natural lighting and the factors on brightness were not presented., and in the USA the essential factors of each environment were throughly presented. In the comparison of the standards on each factor, Korea showed that the standard level presented was less properly prescribed than those of the USA and Japan but it also showed that the standard levels prescribed in the USA and in Japan were mostly similar to the standard levels in records investigated. 3. With the result of the normative standard selection on School Builiding environment factor of prescribed in this study, the controversial points of the standard of ESB in Korea were analyzed and the result was utilized to suggest new preliminary standard of ESB. 4. As the result of the analysis of the controversial points of the standard of ESB in Korea, it was found that the standard of ESB in Korea should be established on a basis of School Health Act and be concretely presented in School Health Regulation and School Health Rule. The factors of each environment was improperly presented in the existing standard of ESB in Korea. Moreover the standard of them was inferior to that of the records investigated and those of in the USA and in Japan and it also showed that the standard of it in Korea was improper to maintain Comfortable Learning Environment. 5. A suggested preliminary standard of ESB acquired through above study as follows: 1) In this study a new kind of preliminary standard of ESB is divided into lighting environment, indoor air environment, noise environment, odor environment and for above classification, reasonable factor and standard should be established and the controling way on each standard and countermeasures against it should be considered. 2) In lighting environment, the factors of natural lighting are divided into daylight rate, brightness, glare. In the standard on each factor, daylight rate should secure 5% of a mean daylight rate and 2% of a minimum daylight rate, brightness ratio of maximum illumination to minimum illumination should be under 10:1, and in glare there should not be an occurrence factor from a reflector outside of the classroom. And the factors of unnatural lighting are illumination, brightness, and glare. In the standard on each factor, illumination should be 750 lux or more, brightness ratio should be under 3 to 1, and glare should not occur. And Optimal reflection rate(%) of Colors and Facilities of Classroom which influences lighting environment should be considered. 3) In indoor air environment factors, thermal factors are divided into (1) room temperature, (2) relative humidity, (3) room air movement, (4) radiation heat, and harmful gases (5) CO, (6) $CO_2$ that are proceeded from using the heating fuel such as oval briquettes, firewood, charcoal being used in most of the classroom, and finally (7) dust. In the standard on each factor, the next are necessary; room temperature: $16^{\circ}C{\sim}26^{\circ}C$(summer : $E.T18.9{\sim}23.8^{\circ}C$, winter: $E.T16.7{\sim}21.7^{\circ}C$), relative humidity: $30{\sim}80%$, room air movement: under 0.5m/sec, radiation heat: under $5^{\circ}C$ gap between dry-bulb temperature and wet-bulb temperature, below 1000 ppm of ca and below 10ppm of $CO_2$, dust: below 0.10 $mg/m^3$ of Volume of dust in indoor air, and ventilation standard($CO_2$) for purification of indoor air : once/6 min.(about 7 times/40 min.) in an airtight classroom. 4) In the standard on noise environment, noise level should be under 40 dB(A) and the noise measuring way and the countermeasures against it should be considered. 5) In the standard on odor environment, odor level under Physical Method should be under 2 degrees, and the inspecting way and the countermeasures against it should be considered.

  • PDF

치유의 숲 산림명상공간 인자의 중요도와 만족도 (The Relationship between Perceived Importance of Space and Users' Satisfaction)

  • 정경미;신원섭
    • 한국환경생태학회지
    • /
    • 제37권4호
    • /
    • pp.273-288
    • /
    • 2023
  • 국내 산림치유명상연구에 있어 산림명상에 적용할 수 있는 기법과 효과에 대한 연구들은 많이 진행되어 왔지만 산림명상이 이루어지는 공간에 대한 연구는 거의 이루어지지 않았다. 그럼에도 불구하고 명상공간은 단순한 장소적 개념이 아니라 산림의 '치유'기능을 담당하고 있는 산림환경요소 즉, 치유인자를 담고 있는 곳으로 치유메커니즘을 밝히는 중요한 단서가 될 수 있다. 이에 본 연구는 치유의 숲 산림명상공간이 명상에 적합한 공간인지 알아보고자 델파이 전문가 설문조사(Delphi Expert Survey Method)로 명상공간의 속성항목을 선정 한 후, IPA기법(Importance Performance Analysis)을 활용하여 치유의 숲 산림명상 공간 이용자의 만족도를 설문 조사하였다. 설문은 국립산림치유원과 산음 치유의 숲, 경기도 잣향기 푸른숲에서 산림명상공간을 이용한 일반성인 315명을 대상으로 2022년 8월부터 11월까지 진행하였다. IPA분석 결과 산림명상공간의 만족도 평균은 5점 리커트 척도에 4.33점(국립산림치유원 4.33점, 산음 치유의 숲 4.34점, 잣향기 푸른숲 4.37점)으로 높게 나타나 세 곳 치유의 숲 명상공간은 산림명상에 적합하게 조성되어 있다고 판단된다. 세 숲 모두 '자연의 소리'에 대한 만족도가 매우 높게 나타났다. 반면 세 숲 모두 '고요함'의 만족도가 상대적으로 낮게 나타나 우선적으로 해결해야 할 문제로 나타났다. 또 개방형설문 결과 자연의 소리, 경관, 공기, 숲 공간, 향기 등 명상공간의 자연요소가 시설과 같은 인공요소보다 명상 만족도에 긍정적인 영향을 미치는 것으로 나타났다. 산림명상의 만족도를 높이기 위해 명상 공간 주변에 물소리 새소리 등의 소리자원을 확보하는 것이 중요하고, 방문객과의 조우를 피하는 독립된 공간에 '명상 숲'을 따로 조성하여 산림치유명상 프로그램 참여자만 입장하는 방법 등을 고려해 볼 필요가 있다.

한국 마을숲 생태계 취약요소 발굴 및 취약성 평가 (The Development of Vulnerable Elements and Assessment of Vulnerability of Maeul-soop Ecosystem in Korea)

  • 임정철;류태복;안경환;최병기
    • 한국전통조경학회지
    • /
    • 제34권4호
    • /
    • pp.57-65
    • /
    • 2016
  • 마을숲은 역사적, 문화적으로 한국 전통 마을경관의 핵심요소이다. 그러나 근대 이후 다양한 영향으로 많은 수의 마을숲이 소실되었거나 쇠퇴되고 있는 실정이다. 역사적, 문화적, 생태적 다양한 보전가치를 가진 마을숲의 체계적 보전 및 복원을 위한 관심과 노력이 필요한 시점이다. 본 연구는 한국 전역에 분포하고 있는 499개의 마을숲에 대하여 구성 식물종 및 서식처, 입지 특성 등을 바탕으로 국내 마을숲에 대한 생태학적 복원 및 지속가능한 이용과 관리 등에 관한 정보를 제공하고자 하였다. 마을숲 생태계를 위협하는 대표적인 6가지 범주의 위협요인을 발굴하고 각 요인별 영향력을 평가하였다. 마을숲 생태계 취약성에 미치는 영향의 정도에 대해 위협요인별 가중치 평가를 AHP 분석기법을 이용하여 보다 입체적으로 분석하였다. AHP 분석기법을 이용한 평가결과 6가지 범주 가운데 면적 축소가 국내 마을숲의 존립에 가장 큰 위협요인으로 지목되었다. 그 다음으로 지형, 토양환경 변화가 마을숲 생태계를 질적으로 변화시키는 위협 요인으로 고려되었다. 식생의 구조와 질적 변화는 서식처 변화보다 마을숲 소실 및 쇠퇴에 낮은 영향을 미칠 것으로 평가되었다. 각 요인별 가중치를 바탕으로 100점을 최고점으로 수치를 환산한 평가틀을 이용하여 마을숲에 대한 취약성 평가가 이루어졌다. 국내 마을숲의 취약성 평가결과 가장 빈도 높은 값을 보이는 등급은 III등급이며, 낮은 등급에서 높은 등급으로 정규분포 경향을 보였다. 높은 자연성을 보이는 I등급의 마을숲이 38개소 존재했으며, 취약요인들에 의해 마을숲 존폐를 위협받는 V등급의 마을숲도 10개소 확인되었다. 각 마을숲별 취약성 평가결과에서도 국내 마을숲의 지속가능성 보장을 위해 마을숲 고유의 면적 회복이 최우선 과제로 대두되었다. 국가 중요 생태자원으로서 각각의 취약요소별 국가수준의 생태적 대응전략 마련이 필요한 것으로 확인되었다.

화강암질풍화토(花崗岩質風化土)의 역학적(力學的) 성질(性質)에 관(關)한 연구(硏究) -전단강도(剪斷强度)의 영향요소(影響要素)와 견밀도(堅密度)에 대(對)하여- (Studies on the Mechanical Properties of Weathered Granitic Soil -On the Elements of Shear Strength and Hardness-)

  • 조희두
    • 한국산림과학회지
    • /
    • 제66권1호
    • /
    • pp.16-36
    • /
    • 1984
  • 화강암질풍화토(花崗岩質風化土)의 미교란(未攪亂) 시료(試料)를 사용하여 일면(一面) 직접(直接) 전단시험(剪斷試驗)으로 측정(測定)한 전단강도(剪斷强度)와 함수비(含水比), 간극비(間隙比), 건조밀도(乾燥密度), 비중(比重)과의 관계(關係)를 통계(統計) 분석(分析)하였고, 화강암질풍화토(花崗岩質風化土)의 사방시공지(砂防施工地)에 식재(植栽)된 리기다소나무림(林)과 리기테-다소나무림(林)에서 토양단면(土壤斷面)을 만들어 산중식토양경도계(山中式土壤硬度計)로 토양(土壤)의 견밀도(堅密度)를 측정(測定)하고 수근분포(樹根分布)를 조사(調査)하여 통계(統計) 분석(分析)한 결과(結果) 다음과 같다. 1) 함수비(含水比), 간극비(間隙比)와 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 2) 건조밀도(乾燥密度)와 전단강도(剪斷强度) 사이에는 정(正)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 3) 비중(比重)과 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 상관관계(相關關係)를 인정(認定)할 수 없었다. 4) 전단강도(剪斷强度)에 영향(影響)을 미치는 영향요소(影響要素)의 직접효과(直接效果)의 크기는 함수비(含水比)>간극비(間隙比)>건조밀도(乾燥密度)의 순위(順位)이다. 5) 다중선형(多重線型) 회귀방정식(回歸方程式)의 분산분석결과(分散分析結果) 함수비(含水比)만이 회귀성(回歸性)이 인정(認定)되므로 함수비(含水比)를 독립변수(獨立變數)로 하여 전단강도(剪斷强度)를 추정(推定)하기 위한 회귀방정식(回歸方程式)은 제한(制限)된 건조밀도(乾燥密度)의 범위내(範圍內)에서 적합도(適合度)가 매우 높게 평가(評價)되었다. 6) 토양(土壤)의 견밀도(堅密度)는 토심(土深)이 깊어짐에 따라 높아진다. 7) 토양(土壤)의 지표경도(指標硬度)와 수근수(樹根數) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 8) 리기다소나무와 리기테-다소나무의 수근(樹根)은 토심(土深) 20cm까지에 대부분 분포(分布)하고 있었다. 9) 리기다소나무림(林)과 리기테-다소나무림(林)에서 측정(測定)한 토양(土壤)의 지표경도(指標硬度)를 독립변수(獨立變數)로한 회귀방정식(回歸方程式)으로 수근수(樹根數)를 추정(推定)할 수 있었으나 낮은 적합도(適合度)를 나타내었다.

  • PDF

우리나라 어머니의 자녀 양육의 의미 - 거제지역을 대상으로 - (An Ethnography of Child-Rearing Experiences of Korean Mothers Living on Koje Island)

  • 이수연
    • 여성건강간호학회지
    • /
    • 제7권4호
    • /
    • pp.518-535
    • /
    • 2001
  • Nursing practices should be based on the understanding of human beings. In order to understand human beings, it is important to study the lifestyles and thoughts of people in their natural environment. In this sense, the cultural aspects of a society need to be studied for a culture-bound nursing service. Child care, which is an important element of nursing, is also strongly influenced by the culture of a society. Therefore, a cultural study is necessary to understand the child-rearing practices of any society. The major purpose of this dissertation is to provide basic foundations for developing a culture-based theory for nursing intervention through studying traditional cultural elements of child care in Korean society. The study examined child-rearing practices in a small village on Koje Island in the southern part of Korea. It utilized ethnographic methodologies including participatory observations and in-depth interviews. The study participants were 9 Korean mothers living on Koje Island. The average age was 52. The data were collected between July in 1998 and December in 1999. The average number of interviews per person was 7-8, and the duration of each interview was approximately 2 hours. The data were analyzed using the Spradley Analytical Method. The following 9 major child-rearing aspects of mothers on Koje Island were discovered as a result of the study: 1. Firstly, mothers on Koje Island were mostly concerned about the "Old Birth Goddess' Curse", especially during their child's early years. This concern was evidenced by their careful behavior when their child was very young and by their praying to the Old Birth Goddess not to be jealous of their babies. 2. Secondly, they wished their children to live a different and better life than themselves. It was represented by their strong motivation toward their children's education as well as their expectation for their children's success. In traditional Korean culture, Korean people think that the rise and fall of the household depend on their offsprings. Therefore, Korean mothers wish their children attain to a higher level of social status through education. 3. Third, mothers are concerned about their children's righteousness. Mothers on Koje island expect their children to live with discretion, justice, strength, respect, harmony, and to do their best in life. 4. Next was an 'anticipation of their children's happy marriage'. The attributes of this category were an 'anxiety about their children's married life', and 'an expectation of a good spouse for their children'. Because Korean people believe that only a son can continue the bloodline of a family, especially Korean mothers have a great concern of the possibility of their daughters not having a son after marriage. Also they have different expectations toward their daughter-in-laws than son-in-laws. 5. Korean mothers also derived their satisfaction from their son. It was characterized by 'excessive affection toward their son', 'dependency on their son', and 'being afraid of their married daughter having a girl like themselves'. Korean society has been a patriarchy. Therefore, a son is beloved as someone who will take care of his old parents, be in charge of ancestral rites, and provide a daughter-in-law who can conceive a son. 6. The sixth category concerned 'the differences in their expectations for their children'. The attributes in this category were 'different expectations depending on their children's gender', 'different expectations depending on their children's ability', and a 'great sympathy toward children with low abilities'. Korean mothers expect their son to become better than their daughter. 7. The seventh category was related to their 'roles in child-caring practices'. Traditionally a child was raised in an extended family system in Korea So it was not the sole duty of a mother to bring up the child. Korean mothers used to receive much help rasing children from their in-laws, and family members. On the other hand, many children grew up by themselves, because their mothers were very busy taking care of housework. Furthermore, many children also grew up in poverty. 8. Mothers also had issues related to 'conflicts in child rearing'. They were characterized by 'lack of understanding', 'rudeness of children', and 'giving vent to one's anger'. 9. Finally, mothers regretted not doing their best in child-rearing practices. It was characterized by a 'bitter feeling of repentance', 'feeling irritated', and 'feeling of unsatisfaction'.

  • PDF

해상풍력터빈의 고유진동수 예측을 위한 지반에 인입된 파일의 탄성지지보 모델 기반 수평 거동 해석 (An analysis of horizontal deformation of a pile in soil using a beam-on-spring model for the prediction of the eigenfrequency of the offshore wind turbine)

  • 유정수;백경민;김태룡
    • 한국음향학회지
    • /
    • 제35권4호
    • /
    • pp.261-271
    • /
    • 2016
  • 지반에 인입된 파일에 대한 거동 해석은 지반의 비선형 거동 특성으로 인해 일반적으로 유한요소에 기반한 수치적인 방법을 주로 이용한다. 그러나 수치 해석은 파일-지반 모델링 및 연산에 많은 노력과 시간을 요구하므로 파일의 제원과 지반 물성치가 확정되지 않은 초기 설계 단계에서는 활용에 많은 한계를 갖는다. 반면, 지반을 선형화한 이론해석의 경우 수치 해석에 비해 모델이 단순하고 연산 시간이 매우 짧으므로, 해석의 신뢰성이 확보된다면 지반-지지구조의 거동 특성을 초기에 예측하는데 유용할 것이다. 본 연구에서 대상으로 하는 풍력발전기의 경우, 초기 설계 단계에서 풍력터빈의 고유진동수 예측을 위한 동적 거동 해석이 요구되며, 이 때 지반에 인입된 풍력터빈의 지지구조는 탄성경계조건으로 단순화하여 동적 거동 해석에 반영할 수 있다. 이를 위해, 본 논문에서는 풍력터빈 지지구조의 선단부 탄성 계수를 도출하고자 지반에 인입된 파일에 대한 파일-지반 연성해석을 수행하였다. 해석 시 지반의 변형은 탄성범위 이내에 있다고 단순화하여 지반에 인입된 파일을 탄성지지된 보로 모델링하였다. 탄성지지보 모델을 이용해 파일 선단에 수평 하중 또는 모멘트가 작용할 때 발생하는 파일의 횡변형을 구하고, 이로부터 영향계수를 도출하였다. 풍력터빈의 지지구조에 대한 해석 예로써, 모노파일과 석션파일에 대해 파일 선단의 영향계수를 구하고, 이를 문헌의 결과와 비교함으로써 해석 결과의 신뢰도를 검증하였다. 또한 이 두 파일의 깊이에 따른 변형 및 선단부의 스프링 상수를 비교하여 지지구조의 강성 측면에서 모노파일과 석션파일의 특성을 살펴보았다.