• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.92-97
• /
• 2002

There are a lot of roots of errors in an motion of the optical pick-up actuator being one of the most significant components in a CD-ROM drive. Most of the studies recently performed have a tendency to seek for the causes from an actuator itself. This paper present the dynamic characteristics of an actuator affected by the motion of a feeding deck. The feeding system is modeled as a rigid body with eight degree-of-freedom. Using Largrange's equation, we derive the linear equations of motion with respect to the rectangular coordinate. We found the fact that the ranges of the natural frequencies of a feeding deck and an actuator are close to each other. And the time responses are also computed by the Newmark method and Runge-Kutta method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.4
• /
• pp.265-277
• /
• 1993

Recently, underground transmission system is growing continuously according to the electric power demand increase in the downtown area. Even if domestic cable makers are manufacturing 154kV oil filled cable and joint, the design technology of cable-joint has not been fully self-reliance. This study is aimed at the detail heat transfer analysis of 154kV cable-joint. So, that is cut into the five sections in order to analyze a conjugate natural convection in two dimensional $r-{\theta}$ coordinate. The streamline and temperature distributions are obtained for each sections. Also the changes of those are analyzed with respect to the variation of transmission currents and cable-joint surface heat transfer coefficients. The same analyses are also shown in view point of the maximum temperature of conductor and local equivalent conductivity.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.37-44
• /
• 2000

Numerical investigation is made to study the effects of natural convection on the formation of macrosegregation of a Pb-Sn alloy solidification process in a 2-D confined rectangle mold. The governing equations are calculated using previous continuum models with SIMPLE algorithm doring the solidification process. In addition. to track the solid-liquid interface with time variations. the moving boundary condition Is adopted and irregular interface shapes are treated with Boundary-Fitted Coordinate system. As the temperature reduce from the liquidus to the solidus, the liquid concentration of Sn. the lighter constituent, increases. Then the buoyancy-driven flow due to temperature and liquid composition gradients, called thermosolutal convection or double diffusion, occurs in the mushy region and forms the complicated macrosegregation maps. Related to this phnomena, effects on the macrosegregation formation depending on the cooling condition and gravity values are described.

• Smart Media Journal
• /
• v.2 no.1
• /
• pp.31-36
• /
• 2013

A robust and efficient text extraction is very important for an accuracy of Optical Character Recognition (OCR) systems. Natural scene images with degradations such as uneven illumination, perspective distortion, complex background and multi color text give many challenges to computer vision task, especially in text extraction. In this paper, we propose a method for extraction of the text in signboard images based on a combination of mean shift algorithm and weighting scheme of hue and saturation in HSI color space for clustering algorithm. The number of clusters is determined automatically by mean shift-based density estimation, in which local clusters are estimated by repeatedly searching for higher density points in feature vector space. Weighting scheme of hue and saturation is used for formulation a new distance measure in cylindrical coordinate for text extraction. The obtained experimental results through various natural scene images are presented to demonstrate the effectiveness of our approach.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.11-19
• /
• 2014

The natural user interface/experience (NUI/NUX) is used for the natural motion interface without using device or tool such as mice, keyboards, pens and markers. Up to now, typical motion recognition methods used markers to receive coordinate input values of each marker as relative data and to store each coordinate value into the database. But, to recognize accurate motion, more markers are needed and much time is taken in attaching makers and processing the data. Also, as NUI/NUX framework being developed except for the most important intuition, problems for use arise and are forced for users to learn many NUI/NUX framework usages. To compensate for this problem in this paper, we didn't use markers and implemented for anyone to handle it. Also, we designed multi-modal NUI/NUX framework controlling voice, body motion, and facial expression simultaneously, and proposed a new algorithm of mouse operation by recognizing intuitive hand gesture and mapping it on the monitor. We implement it for user to handle the "hand mouse" operation easily and intuitively.

• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.10-18
• /
• 2009

Dyeing process of the natural indigo powder onto ramie and silk fabrics was investigated by using glucose and calcium hydroxide as a reducing system. Effect of reduction and dyeing conditions such as temperature and time of reduction/dyeing, and concentrations of glucose and calcium hydroxide on the dyeing process were explored. Indigo powder was obtained by drying the conventional niram paste in an oven at $50^{\circ}C$. Color strength of the dyed fabrics was evaluated by K/S value measured at the wavelength of maximum absorption(${\lamda}$max). Munsell color coordinates(H V/C) were used to compare fabric colors of ramie and silk. Ramie fabric showed purple-blue color for all the temperature and time. On the contrary, silk fabric showed wide range of color including brown, brown-green, green at the different temperature. With the increase of K/S value, the coordinate of value(lightness) decreased for both of ramie and silk fabrics. The coordinate of hue(shade) changed drastically with the increase of K/S value for silk fabric, compared with that of ramie fabric which showed nearly constant value at the whole range of K/S value. Optimum concentrations of calcium hydroxide were for 6 g/L for ramie and 4 g/L for silk at $60^{\circ}C$ and 50 min. K/S value increased with the indigo concentration. Maximum K/S value was shown at $10{\sim}12$ g/L of glucose concentration. For both of ramie and silk fabrics, the colorfastness of washing and light was lower than that of rubbing. All the colorfastness values were improved with the increase of color strength.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1129-1137
• /
• 1990

Based on the formulation which incorporates large deformation and anisotropy, an elastic-plastic finite element code is developed with membrane element to include the contact treatment. For the analysis of the general sheet metal forming process with contact condition, the treatment of contact is considered by employing the successive skew coordinate system. Three kinds of sheet metal forming processes with contact conditions are analyzed; stretching of a square diaphragm with a hemispherical punch, deep drawing of a circular cup and deep drawing of a square cup. Then the computational results are compared with the experiment. The computed loads and the distribution of the thickness strain are in good agreement with the experiment for all cases. However, the computational results of the thickness strain show the effect of bending can not be ignored in the deep drawing process whereas the effect of bending is negligible in stretching.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.4
• /
• pp.1-10
• /
• 1976

It is a well-known phenomenon that, in the case of vibrations of an elastic body in a fluid such as water, the presence of the surrounding fluid has the effect of lowering the natural frequencies of the vibration as compared with those in air or vacuum on account of the increased inertia, i.e. added mass. In this report, defining the mass increase factor as the ratio of added mass to vibration mass of the body in air, the author investigated the mass increased factor of an elastic plate vibrating in the fluid. It is assumed that the edges of the plate are simply supported, and that the surrounding fluid is an infinite ideal one. For the problem formulation the elliptical cylindrical coordinate system is adopted, so that a rectangular plate may be represented by a sheet degenerated from an elliptical cylinder. By virtue of the coordinate system adopted, plates which are chordwisely finite and lengthwisely contineous could directly be treated, but plates which are chordwisely finite in both directions could not be treated directly. For the latter, hence, plates which are chordwisely finite and lengthwisely semi-finite are investigated as an appropriate approximation. Some examples of the mass increase factor are numerically calculated for the fundamental mode and modes of zero or one nodal line in each direction with the range of the aspect ratio from 1 to 10 or more.

• Journal of computational fluids engineering
• /
• v.18 no.2
• /
• pp.35-40
• /
• 2013

Natural convection of air with Pr=0.7 between two horizontal plates with small magnitude non-uniform temperature distribution[${\in}{\Delta}Tsin({\kappa}X/H)$, H : gap width, X : horizontal coordinate] in the lower plate is numerically(${\in}=0.01$) investigated. In the conduction-dominated regime with $Ra{\leq}1700$, two upright cells are formed over one wave length($2{\pi}/{\kappa}$). For small wave number, the flow becomes unstable with increase of Rayleigh number, and multicellular convection occurs above a critical Rayleigh number. The flow patterns are classified by the number of eddies over one wave length. When ${\kappa}=1$, a transition of $2{\rightarrow}4{\rightarrow}6$ eddy flow occurs with increase of Rayleigh number, and no hysteresis phenomenon is observed. Dual and triple solutions are found for ${\kappa}=1$, and transitions of $10{\rightarrow}8$, $8{\rightarrow}6$, $6{\rightarrow}4{\rightarrow}2$ eddy flow occur with decrease of Rayleigh number.

• Fashion & Textile Research Journal
• /
• v.11 no.5
• /
• pp.799-807
• /
• 2009

The purpose of this study was to examined which the pursuing image, make-up and hair style desire on their wedding day and how the future brides managed their appearance for the wedding. This qualitative research was based on the data collected by in-depth interviews with 15 brides in their 20s, 30s and 40s who reside in Daegu and Gyeongbuk. The results of the study are shown follow: The images that the brides most pursued for the wedding day were elegant images and refine images. The favorite wedding-dress styles of brides were elegant, refine, lovely, classical, and natural style in order of preference. The design of the dress was top priority when selecting the wedding-dress and it was followed by the function that complements anyones' shape. The brides liked natural style wedding make-up most and refine and young one followed. They considered eye make-up most important after skin expression, that is, covering defects of their skin. Concerning wedding hair styles, an up-style which is typical for wedding is desired most and a natural flowing hair style second. Regarding fitness, they mainly took physical exercise and went on a diet which is not unreasonably harsh.