• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.215-215
• /
• 2017

• Journal of the Korean Society of Safety
• /
• v.25 no.4
• /
• pp.84-89
• /
• 2010

In Korea, the method of assessing uninsured costs is not adopted in a direct way, but in an indirect way on the basis of the insured cost. From this method, the cost of accidents can be approximately calculated, but accurate calculation of uninsured costs is not easy. Therefore, a better method of assessing uninsured costs caused by industrial accidents is necessary. In this study, the system program and database for assessing uninsured costs from industrial accidents were developed on the basis of the results of previous studies. This program and database could quantitatively assess uninsured costs more accurately and quickly than other studies. This system would contribute to the efficient analysis of industrial accident costs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.54-60
• /
• 2013

There is increasing demand for practical groundings for small-area substations because of the recent revision of Korea's Electrotechnical Regulations, which necessitates the method of evaluating their safety. This paper proposes a practical mesh grounding system for 22.9kV substations and studies how to evaluate its safety. The proposed grounding system is proved to obey the safety criteria of ANSI/IEEE Std. 80 via ANSI/IEEE Std. 80 method and computer simulation.

• Journal of the Korean Society of Safety
• /
• v.24 no.1
• /
• pp.21-25
• /
• 2009

Extinguishing limits of laminar ethylene/oxygen flames in both normal and inverse co-flow jet burner have been determined experimentally and computationally. An inert gas($N_2$, Ar, $CO_2$) was added into the oxidizer to find the critical concentration and the effectiveness of the agents on flame extinction. The experimental results showed that the physical aspect of inert gases was main mechanism for flame blow-out as same as cup burner test, but the flow effect should be considered to determine the extinction concentration. The numerical prediction was performed with modified WSR model and the result was in good agreement with the measurements. The experimental and numerical methods could be used for the assessment of various flame suppression agents such as minimum extinguishing concentration.

• Korean Journal of Veterinary Research
• /
• v.61 no.3
• /
• pp.20.1-20.9
• /
• 2021

This study is to develop a new scoring system for rating Hazard analysis and critical control points prerequisite evaluation items for meat shops to provide a more objective and accurate evaluation of food safety compliance. The importance of each item was measured by looking at the hazard severity level and the rate of non-compliance associated with it. It was found that the new scoring system is more stringent and gives a clearer picture of compliance with the most critical safety standards, and therefore is expected to have a positive effect on the hygiene and safety of livestock products.

• Food Science and Industry
• /
• v.51 no.3
• /
• pp.196-208
• /
• 2018

This paper described the contents of the WTO (world trade organization) SPS (world trade organization) Agreement and trends in the WTO SPS provisions such as equivalence, localization, transparency, and risk assessment. The purpose of the WTO SPS agreement is to promote international trade by preventing arbitrary and unreasonable use of SPS measures, which are the rights of a country for the protection of human health and animal and plant health, and by abolishing the non-tariff barriers. To this end, the requirements for implementing the SPS measures taken by the importing country are restricted to those that can scientifically prove to be inevitable for SPS protection. The major provisions in WTO SPS agreement were elaborated to promote international trades. When trade-restricted SPS measures such as prohibition of imports are made, a scientific basis should be provided. Therefore, it is essential to provide scientific evidence based on risk analysis to protect people's health from potentially harmful imported foods.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.3
• /
• pp.278-285
• /
• 2016

The key features of maritime accidents are the change of their attributes by new risks from time to time. To prevent maritime accidents in Korea, the impacts by new risks on domestic safety environments should be identified or predicted. The purpose of this paper is to find the hazard factors by new risks on maritime safety in Korea. The meaning of new risks is the elements of accident hazard which is compiled from new or rare or unprecedented events in the worldwide maritime transportations. The problems of new risks are the lacks of optimum countermeasures to mitigate accident risks. Using the questionnaires with 152 event scenarios classified by 20 accident causes, the hazard identification and risk analysis of new risks was performed based on the Formal Safety Assessment (FSA) by IMO. A total of 22 Influence Diagrams, which is to depict the transit flows between accident causes to consequences, is used in the construction of 152 event scenarios. A total of 20 accidents causes is the same contents as the causation factors represented in Statistical Year Book for Maritime Accidents of Korean Maritime Safety Tribunals. After defining the evaluation equations to the response results of questionnaires by 46 experts, the work for risk analysis is carried out. As results from the analysis of 152 scenarios, it is known that the root cause to affect on maritime safety in Korea is the pressure of business competition and it led to the lacks of well experienced crews, the overload of vessel operations and crew's fatigue. In addition, as results from the analysis of 20 accident causes, the three accident causes are to be candidate as main issues in Korea such as the inadequate preparedness of departure, the neglecting of watch keeping in bridge and the inadequate management of ship operations. All of the results are thought to be as basic hazard factors to safety impediments. It is thus found that the optimum Risk Control Options to remove the hazard factors and to mitigate consequences required are the following two factors: business competition and crewing problems.

• The Plant Pathology Journal
• /
• v.22 no.4
• /
• pp.353-359
• /
• 2006

Transgenic Nicotiana benthamiana plants harboring the coat protein(CP) gene of Zucchini green mottle mosaic virus(ZGMMV) were chosen as a model host for the environmental risk assessment of genetically modified plants with virus resistance. This study was focused on whether new virus type may arise during serial inoculation of one point CP mutant of ZGMMV on the transgenic plants. In vitro transcripts derived from the non-functional CP mutant were inoculated onto the virus-tolerant and -susceptible transgenic N. benthamiana plants. Any notable viral symptoms that could arise on the inoculated transgenic host plants were not detected, even though the inoculation experiment was repeated a total of ten times. This result suggests that potential risk associated with the CP-expressiing transgenic plants may not be significant. However, cautions must be taken as it does not guarantee environmental safety of these CP-mediated virus-resistant plants, considering the limited number of the transgenic plants tested in this study. Further study at a larger scale is needed to evaluate the environmental risk that might be associated with the CP-mediated virus resistant plant.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.520-531
• /
• 2022

Purpose: Based on the risk evaluation of hydrogen fueling stations, this study aims to find a plan to strengthen management safety by examining profitability and management risk, which are major concerns of employers. Method: The risk evaluation was divided into 'acceptable risk' and 'allowable risk' over time from the stage of installation of hydrogen fueling stations, and compared and analyzed with the results of existing studies. Result: Existing studies have been appropriately applied to the risk assessment performed at the stage of installing hydrogen fueling stations. However, possible risks could be found at the operational stage. In other words, it was derived that an evaluation of management risk was also necessary. And through this, it was confirmed that the safety of hydrogen fueling stations was strengthened. Conclusion: The risk assessment that precedes the stage of installing hydrogen fueling stations is appropriate because significant results have been derived from the 'acceptable risk' assessment. However, the operator needs to evaluate the risks that may occur at the operating stage, that is, the 'allowable risks' and prepare countermeasures. Therefore, it is proposed to add management risk assessment items to build and operate safer hydrogen fueling stations.

• Safety and Health at Work
• /
• v.2 no.2
• /
• pp.105-121
• /
• 2011

Objectives: This paper presents the framework and protocol design for a construction industry risk management toolbox. The construction industry needs a comprehensive, systematic approach to assess and control occupational risks. These risks span several professional health and safety disciplines, emphasized by multiple international occupational research agenda projects including: falls, electrocution, noise, silica, welding fumes, and musculoskeletal disorders. Yet, the International Social Security Association says, "whereas progress has been made in safety and health, the construction industry is still a high risk sector." Methods: Small- and medium-sized enterprises (SMEs) employ about 80% of the world's construction workers. In recent years a strategy for qualitative occupational risk management, known as Control Banding (CB) has gained international attention as a simplified approach for reducing work-related risks. CB groups hazards into stratified risk 'bands', identifying commensurate controls to reduce the level of risk and promote worker health and safety. We review these qualitative solutions-based approaches and identify strengths and weaknesses toward designing a simplified CB 'toolbox' approach for use by SMEs in construction trades. Results: This toolbox design proposal includes international input on multidisciplinary approaches for performing a qualitative risk assessment determining a risk 'band' for a given project. Risk bands are used to identify the appropriate level of training to oversee construction work, leading to commensurate and appropriate control methods to perform the work safely. Conclusion: The Construction Toolbox presents a review-generated format to harness multiple solutions-based national programs and publications for controlling construction-related risks with simplified approaches across the occupational safety, health and hygiene professions.