• 보존과학연구
• /
• s.28
• /
• pp.5-19
• /
• 2007

The annals of Joseon Dynasty is the most valuable resource containing the record of Korean history and has been known as one of the UNESCO's Memory of the World Register. There was a period that the annals of Joseon Dynasty was used with beeswax to control pests. It is considered as the prior reason of damage on the annals of Joseon Dynasty. Therefore, in this study we examined the restoration paper(Hanji) as the solution of damage in the waxed volume of the annals of Joseon Dynasty. FT-IR spectrometer was used to examine traditional paper inside and outside of Korea and accelerated artificial aging paper. As a result of FT-IR analysis, spectrum did not showed its big difference in all paper used in this study. However, there was a different spectrum in paper which was made with not Broussonetia kazinoki, but Echinochloa crus-galli var. frumentacea and Dioscorea batatas. Among traditional papers in various countries, spectrum of Korean paper showed the most similarity from the annals of Joseon Dynasty. In comparison between accelerated artificial aging paper and waxed volume, we could identify the change of spectrum affected by the damage.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.2
• /
• pp.161-169
• /
• 2015

According to SOLAS Regulation XII/6.5.3 and IMO GBS functional requirement(IMO, 2010), the structural redundancy of multi-bay stiffened panel in cargo area of bulk carrier should be provided enough in order to endure the initial design load though one bay of the stiffened panel is damaged due to plastic deformation or fatigue crack. To satisfy structural redundancy, Harmonized Common Structural Rules (hereinafter CSR-H, IACS, 2014) proposed to use 1.15 instead of 1.0 for buckling usage factor of stiffened panel in cargo area. This paper shows that buckling usage factor in CSR-H for structural redundancy is somewhat conservative considering the ultimate strength calculated by using nonlinear FEA for the damaged condition which is only one bay's plastic deformation due to colliding by weigh object like a bucket. Also, this paper presents that increasing of plate thickness only is more effective to get enough structural redundancy.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.4
• /
• pp.335-342
• /
• 2000

This study is to integrate and to analyzegraphic and attribute data in features which should be preceding for the ITS construction. A 1:5000 scale map as a national basemap was used and was checked for feasibility. For the convenience of position confirmation, the analysis component was developed and was linked to addresses. Also, the attribute information was considered on the shortest route, and optimal route was selected by investigating traffic volumes on main crossroads depending on the time zone. The optimal route could be selected by analyzing user's demands, position and statistical data, and the position information could be provided efficiently by combining the graphic information with the land register information.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.1 no.1
• /
• pp.39-49
• /
• 2009

The use of high-strength aluminum alloys is increasing in shipbuilding industry, particularly for the design and construction of war ships, littoral surface craft and combat ships, and fast passenger ships. While various welding methods are used today to fabricate aluminum ship structures, namely gas metallic arc welding (GMAW), laser welding and friction stir welding (FSW), FSW technology has been recognized to have many advantages for the construction of aluminum structures, as it is a low-cost welding process. In the present study, mechanical properties of friction stir welded aluminum alloys are examined experimentally. Tensile testing is undertaken on dog-bone type test specimen for aluminum alloys 5083 and 5383. The test specimen includes friction stir welded material between identical alloys and also dissimilar alloys, as well as unwelded (base) alloys. Mechanical properties of fusion welded aluminum alloys are also tested and compared with those of friction stir welded alloys. The insights developed from the present study are documented together with details of the test database. Part of the present study was obtained from the Ship Structure Committee project SR-1454 (Paik, 2009), jointly funded by its member agencies.

• Journal of Korean Medicine for Obesity Research
• /
• v.19 no.1
• /
• pp.56-67
• /
• 2019

Objectives: The purpose of this study is to review clinical studies of herb medicine and acupuncture treatment on obesity in menopausal women. Methods: Key words "Obesity", "Menopause", "Herb medicine", "Acupuncture", "Moxibustion", "Catgut embedding" were searched on 9 database systems (PubMed Central, Cochrane Controlled Register of Trials, Embase, China Academic Journals, Korean Traditional Knowledge Portal, Oriental Medicine Advanced Searching Integrated System, Korean Studies Information Service System, National Digital Science Library, DBpia) on April 30th 2019. Results: 1 case report and 17 clinical trials were collected in accordance with the selection and exclusion criteria. Among the 17 trials, 6 were randomized controlled trials, 1 was controlled clinical trial, and 10 were single-arm trials. The types of intervention were herb medicine, electroacupuncture, acupuncture, auricular acupuncture, warm needle acupuncture, moxibustion, laser acupuncture, and catgut embedding. The study design, study results and method of intervention were analyzed. Conclusions: 1 case report described the effectiveness of pharmacopuncture, 4 trials described the effectiveness of herbal medicine, 2 of electroacupuncture, 1 of laser acupuncture, and 2 of catgut embedding. Among the 17 trials, 2 studies showed that herbal medicine treatment was more effective than no treatment or selective serotonin reuptake inhibitors, and 1 study showed that electroacupuncture was more effective than hormone therapy. All of 18 selected studies reported the effectiveness of weight reduction and abdominal obesity reduction after the traditional Korean medicine treatment for obesity in menopausal women.

• Journal of Korean Medical classics
• /
• v.32 no.1
• /
• pp.105-116
• /
• 2019

Objectives : There are many secluded Chinese characters - so called Byeokja (僻字) in ancient classic literature, and Chinese characters that are not registered in Unicode and Variant characters (heterogeneous characters) that cannot be found in the current font sets often appear. In order to register all possible Chinese characters including such characters as units of information exchange, this study attempts to propose a method to encode the morphological information of Chinese characters according to certain rules. Methods : This study suggests the methods to encode the connection between the nodules constituting the Chinese character and the coordinates of the nodules. In addition to that, rules for expressing information about curves, expressions of aspect ratios of characters, rules for minimizing coordinate lines, and rules for expressing aggregation status of character components are added. Results : Through the proposed method, it is possible to generate codes of a certain length by extracting only information expressing the morphological configuration of characters. Conclusions : The method of character encoding proposed in this study can be used to distinguish variant characters with small variations in Byeokja, new Chinese characters and character strokes and to store and search them.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.4
• /
• pp.31-38
• /
• 2021

In this paper, we proposed an optimal design for determining the shape of a lifting lug freely by applying a multivariate function to the D-type lug, which is commonly used in shipyards. We derived the optimal aspect ratio of the lug through structural analysis and analyzed the safety and behavior of the lug aspect ratio. As a result, two types of final candidates, both lighter than the existing lug weight, were suitable for the ratio. They were found to have the greatest force at an angle of 45 degrees when a load of 100 tons was imposed. When the horizontal and vertical feature ratio of the lug was 1:3, it showed excellent results in terms of safety rates while maintaining weight reduction and functional aspects.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.24-32
• /
• 2021

The size of container ships is increasing to increase the cargo loading capacity. However, container ships are limited in terms of the hull longitudinal strength. To overcome this limitation, brittle crack arrest steel can be used. This study was aimed at examining the influence of the heat input on the welding procedures of flux cored arc welding and submerged arc welding. In the experiment, the crack tip opening displacement test, which pertains to a parameter of fracture mechanics, was performed, and a 3-point bending tester was adopted. Based on the results, the crack measurement method was presented, and the stress expansion coefficient value for the pre-fatigue crack length was derived according to the heat input after the pre-cracking length was measured. It was noted that the heat input affected the crack tip opening displacement of brittle crack arrest steel.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.87-95
• /
• 2024

This study is on modulo scheduling algorithms for multicore processor in machine learning applications. Machine learning algorithms are designed to perform a large amount of operations such as vectors and matrices in order to quickly process large amounts of data stream. To support such large amounts of computations, processor architectures to support applications such as artificial intelligence, neural networks, and machine learning are designed in the form of parallel processing such as multicore. To effectively utilize these multi-core hardware resources, various compiler techniques are being used and studied. In this study, among these compiler techniques, we analyzed the modular scheduler, which is especially important in one core's computation pipeline. This paper looked at and compared the iterative modular scheduler and the swing modular scheduler, which are the most widely used and studied. As a result, both schedulers provided similar performance results, and when measuring register pressure as an indicator, it was confirmed that the swing modulo scheduler provided slightly better performance. In this study, a technique that divides recurrence edge is proposed to improve the minimum initiation interval of the modulo schedulers.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.1
• /
• pp.51-58
• /
• 2014

A LFSR is commonly used for various stream cryptography applications to generate random numbers. A Leap-ahead LFSR was presented to generate a multi-bits random number per cycle. It only requires a single LFSR and it has an advantages in hardware complexity. However, it suffers from the significant reduction of maximum period of the generated random numbers. This paper presents the new segmented Leap-ahead LFSR to solve this problem. It consists of two segmented LFSRs. We prove the efficiency of the proposed segmented architecture using the precise mathematical analysis. We also demonstrate the proposed comparison results with other counterparts using Xinilx Vertex5 FPGA. The proposed architecture can increase 2.5 times of the maximum period of generated random numbers compared to the typical Leap-ahead architecture.