• 대한한의학회지
• /
• 제37권3호
• /
• pp.97-111
• /
• 2016

Objectives: This study aims to investigate the policy status of traditional medicine standardization between Korea and China as well as to derive a strategic development plan for Korean medicine standardization. Methods: The existing national plans and preceding studies on traditional medicine standardization in Korea and China were reviewed, and scope of the study was categorized as having three main aspects: infrastructure; standard development and standardization activities; and application and diffusion. Results: Nine development plans for Korean medicine standardization derived under the study were as follows: With regard to infrastructure of standardization, 1) standardization plan of Korean medicine shall be established based on involvement of multi-government ministries. 2) It shall be set with a consistent cooperation process among standardization-related organizations, as well as 3) encourage the industry to participate in standardization activities. To activate standards development, 4) launching the R&D-standardization-industrialization linked project, 5) supporting Korean medicine society and the mirror committee for motivation, and 6) planning the international joint research for development of standard and expanding standardization activities are recommended. In the aspect of application, there is a need for 7) expanding certification systems for the industry and 8) evaluation and feedback on the life-cycle of standardization. Lastly, 9) educational programs for training experts of standardization shall be developed and implemented. Conclusions: In order to invigorate standardization activities for Korean medicine, enhancement of planning and evaluation capacity, ensuring the strategic development of standards, broadening boundaries of international standardization activities, and training professionals are required.

• 과학기술학연구
• /
• 제2권1호
• /
• pp.63-83
• /
• 2002

이 논문에서는 한국 과학기술정책의 시기별 특성과 전체적 특성을 검토하였다. 과학 기술정책의 발전단계는 형성기, 성장기, 전환기로 구분하였다. 한국에서는 과학기술의 진홍을 위한 제도적 기반이 공업화의 초기 단계부터 갖추어졌고, 1980년대 이후에는 정부연구개발사업이 전개되는 가운데 민간 부문의 기술혁신활동이 급속히 증가했으며, 1990년대 후반에는 과학기술정책에 대한 새로운 이념이 모색되면서 관련 법령 및 계획이 정비되기 시작하였다. 과학기술정책의 전체적 특성은 정책레짐이란 개념을 바탕으로 분석하였다. 지금까지 한국의 과학기술정책은 산업발전을 가장 중요한 정책목표로 삼아왔고, 정책수단의 측면에서는 외형적 투입요소가 증가하는 양상을 보였으며, 관료 중심의 정책문화가 지배적이어서 경제문화, 학문문화, 시민문화는 충분히 발전하지 못했다.

• 수산해양교육연구
• /
• 제15권2호
• /
• pp.206-218
• /
• 2003

In spite of the importance of a fishing industry, neither any terminology defined in details nor academic systems to educate the workers in the fishery were established in the fisheries social education. The fisheries social education was considered to be the practical area around the actual fields. Therefore, on-site education was very important. Accordingly, this study collected and analyzed theoretical basis of a social education and data on the rural adult education and examined the actual status of the fishing industry in Korea and fisheries extension services enterprise and fisheries developmental enterprise corresponding to the actual fisheries social education conducted in Korea. On the basis of these frames, this study summarized the direction for the progress of fisheries social education that has not been studied until now for the purpose of suggesting the future directions of the fisheries social education as follows; The recognition on the importance of fisheries social education and fundamental researches in the fisheries social education should be extended. The practical development of fisheries social education should be realized. Fisheries extension services enterprise should be evolved by fishermen. The abilities of instructors in the fisheries social education should be improved. The academic factors in the fisheries social education should be emphasized. Inter-disciplinary and multi-disciplinary approaches should be adopted. Various programs should be developed for the progress of the fisheries social education. The exclusive department in charge of the fisheries social education should be established. The information system for the fisheries social education should be secured. The industry, academic organizations and the organs should make cooperation. The fisheries social education should be provided by general social education institutions for the progress. The fisheries development should be deployed on the basis of environmental preservation. It is necessary to deploy the new fishing village movement like the Saemaul movement to the fisheries. The administrative and financial supports for the fisheries social education should be expanded. It is essential to cultivate the future fishermen for the international competitiveness.

• 과학기술학연구
• /
• 제8권1호
• /
• pp.29-54
• /
• 2008

노무현 정부의 과학기술 거버넌스 개혁은 '참여정부'의 국정기조 아래 과학기술정책의 입안과 실행에서 다양한 정부 부처간 정책조정능력을 향상시키려는 제도개혁과 함께 사회 부문의 참여를 촉진하기 위한 제도 형성에도 노력했다는 점에서 큰 특징을 보인다. 정부 내 정책조정의 이슈에 초점을 두고 있는 기존의 연구와는 달리 이 논문은 거버넌스 시각과 정책담론 제도의 개념을 도입하여 정부 내 부처간 정책조정의 이슈와 함께 사회 행위자의 정책 참여 이슈를 보다 명시적으로 검토했다. 이 논문에서는 참여정부의 과학기술 거버넌스 개혁의 경우 다양한 수준에서 전문가 및 사회 행위자들의 참여가 이루어졌지만 사회행위자들의 참여가 제한되고 개별적인 방식으로 참석한 결과 정책담론제도의 형식화가 야기되었다. 정책담론제도의 형식화는 정책의 효과성과 정당성을 저해하는 요인이 된다. 정책담론제도와 정책조정제도는 상호보완 관계에 있다고 볼 수 있기 때문이다.

• Journal of Animal Science and Technology
• /
• 제51권3호
• /
• pp.201-206
• /
• 2009

돼지 원산지 추적 및 브랜드육 식별을 위한 MS marker set를 확립하기 위해 EU의 EID+DNA DNA Tracing 연구 project, 국제동물유전학회 및 Roslin 연구소 등에서 제안한 돼지의 다형성 분석에 사용되는 MS marker 중 17종을 선발하여 다형성지수, F-통계량, 동일개체 출현확률 및 친자감별확률 등을 MSA, CERVUS, FSTAT, GENEPOP 및 API-CALC 프로그램 등을 연계적으로 활용하여 추정하였다. 다형성지수 추정치를 1차 선발요인으로 하고, 각 MS marker의 PCR 결과물의 크기 및 분석 비용의 경제성을 추가로 감안하여 최종 13종의 MS marker (SW936, SW951, SW787, S00090, S0026, SW122, SW857, S0005, SW72, S0155, S0225, SW24 and SW632)와 성감별을 위한 2개의 성감별 primer로 조합된 하나의 Multiplexing PCR 시스템을 확립하였다. 이를 이용해 돼지 사육환경을 무작위 교배집단(PI), 반형매 교배집단 그리고 전형매 교배집단으로 가정하여 동일개체 출현확률을 분석한 결과 $2.47\times10^{-18}$, $6.39\times10^{-13}$ 그리고 $1.08\times10^{-8}$로 나타나 브랜드 식별 및 원산지 추적에 적합할 것으로 사료된다.

• Journal of Preventive Medicine and Public Health
• /
• 제42권5호
• /
• pp.331-336
• /
• 2009

Objectives : The objectives of this study were to determine the relationship between lifestyle-implementation and metabolic syndrome in an electronics research and development company, and to provide a foundation for health providers of health management programs for setting priorities. Methods : From July 1 to July 16, 2008 we carried out a descriptive cross-sectional survey. Consecutive workers of one R & D company in Seoul, Korea (N=2,079) were enrolled in study. A checklist for lifestyle (from the National Health Insurance Corporation) consisted of questions regarding diet, drinking, smoking and exercise. After the survey, researchers obtained data from health profiles for metabolic syndrome(waist-circumference, triglycerides, HDL cholesterol, blood pressure and fasting blood sugar level). Lifestyle was recorded as good or not good. Statistical analysis of metabolic syndrome and the lifestyle of subjects was done using multiple logistic regression analysis. Results : The prevalence of metabolic syndrome in our study gropu was 13.3% (N=277). After adjustment for age, the adjusted odds ratios (odds ratio, 95% confidence intervals) for metabolic syndrome increased in proportion to the number of bad habits: two (1.72, 1.23-2.44), three (2.47, 1.73-3.56), and four (3.63, 2.03-6.34). Relative to subjects eating both vegetables and meat', the OR for 'meat' eaters was 1.66 (1.18-2.31). Compared with 'nonsmokers and ever-smoker', the OR for 'current-smoker' was 1.62 (1.25-2.10). Compared with 'Healthy drinker', the OR for 'unhealthy drinker' was 1.38 (1.05-1.83). Conclusions : Poor lifestyle was associated with an increased likelihood of metabolic syndrome. These findings suggest that lifestyle-based occupational health interventions for young employees should include a specific diet, smoking cessation, and healthy-drinking programs.

• 기술혁신연구
• /
• 제22권2호
• /
• pp.1-30
• /
• 2014

우리나라는 1980년대 초 절충교역 제도를 도입하여 국가 경제발전 및 국방 전력증강의 수단으로 활용하고 있으며 2010년까지 백억 달러가 넘는 가치를 절충교역으로 획득하였다. 그러나 한편으로 그간 절충교역 제도의 실효성에 대해 지속적으로 의문이 제기되어온 것이 사실이다. 현실적으로 절충교역을 통해 획득한 기술의 성과를 객관적으로 분석, 산출한다는 것은 매우 어려운 과제이며 이에 따라 정량적인 성과분석은 매우 제한적으로 이루어지고 있는 실정이다. 따라서 본 연구에서는 보다 깊이 있는 성과분석을 통하여 절충교역활용 현황을 파악하고 이를 기반으로 향후 절충교역 제도의 발전방향을 제안하였다. 먼저, 기존 성과분석 관련 문헌조사를 통해 절충교역 성과분석을 위한 조사지표를 도출하여 설문서를 작성하였으며, 각 수혜기관, 업체를 대상으로 조사를 실시하였다. 또한 각 군, 정부기관 및 연구소, 업체 소속 절충교역 분야 전문가를 대상으로는 정성적인 측면에서 제도의 성과, 실효성에 대한 설문을 실시하여 그 결과를 분석하였다. 그리고 최근 3개년 동안의 사업에서 획득한 기술들을 대상으로 DEA 기법을 활용하여 성과 창출의 효율성을 살펴보았다. 성과분석 및 설문조사 결과, 공통적으로 기술적 측면에서는 긍정적인 성과가 있었으나 경제적인 부분에서는 성과가 상대적으로 저조했으며 설문결과도 이와 동일한 것으로 나타났다. 이를 토대로 절충교역 제도는 신정부의 정책방향에 발맞춰 기존 핵심기술 획득 위주의 정책에서 대 중소기업 상생, 방위산업 활성화를 통한 국가경제 기여를 위해 그 추진방향의 전환이 필요한 것으로 판단된다.

• 한국통신학회논문지
• /
• 제35권11B호
• /
• pp.1710-1714
• /
• 2010

현대의 첨단 무기체계는 다양한 성능과 기능의 필요에 의해 사용자 (무기운용자 포함) 요구사항이 복잡해지고 있다. 이로 인해 방위사업청 훈령 제 65호에서는 무기체계 개발 시 시스템공학의 적용을 강제 사항으로 규정하고 있다. 하지만 시스템공학에서 수행해야 하는 업무가 다양하고 각 단계별 산출물이 많다. 국내의 많은 방위산업관련조직 (국방부, 방위산업체, 각 연구소) 들에서 시스템공학에 대한 성숙도와 관점의 차이가 있다. 시스템공학 산출물이 사업 성공의 핵심적인 역할을 해야 함에도, 사업과 다른 하나의 일로 생각하는 경우가 많다. 본 연구에서는 국방획득사업에서 시스템공학의 적용에 대한 핵심 요소에 대한 내용을 분석 정리하고 또한 각 단계 산출물의 사이의 추적성을 도출하였다. 본 연구 결과를 통해서 방위산업 관련 조직의 공통적인 시각을 제시하고 통합함으로써 국방획득사업에서 예산 초과 및 개발기간 지연 등의 요소를 제어함으로써 사업에서의 위험 요소를 감축시키는 데에 도움이 되도록 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.