• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.337-342
• /
• 1998

A new fuzzy control algorithm for the control of active magnetic bearing (AMB) systems is proposed in this paper. It combines PDC design of Joh et al. [8][9] and Namdani-gype control rules using fuzzy singletons to handle the nonlinear characteristics of AMB systems efficiently. They are named fine mode control and rough mode control , respectively. The rough mode control yields the fastest response for large deviation of the rotor and the fine mode control fives desired transient response for small deviation of the rotor. The proposed algorithm is applied a AMB systems to verify the performance of the method, The comparison of the proposed method to a linear controller using a linearized model about the equilibrium point and PDC algorithm in [7] show the superiority of the proposed algorithm.

• 공학교육연구
• /
• 제20권4호
• /
• pp.61-66
• /
• 2017

Automatic flow control system composed by hardware and software was designed and fabricated to be used as teaching tool of feedback control theory in university experimental class. This system includes hardwares like data acquisition board, flow measuring device, transmitters, and the pneumatic valve, and software like LabView program for the monitoring and control of flow rates. The system was designed as the student can see the control effect of not only set point but also disturbance changes. Also the LabView program was composed for the calculation of controller parameters of both Ziegler-Nichols and Cohen-Coon tuning. The students can apply both tuning constants and compare the control performances. This system will provide the easy way for the students to understand the function and specification of control hardwares, and to raise the programing ability of control software.

• 한국태양에너지학회 논문집
• /
• 제35권6호
• /
• pp.17-24
• /
• 2015

The MPPT(Maximum Power Point Tracking) techniques are employed in photovoltaic (PV) systems to maximize the PV array output power which depends on solar irradiance and temperature. The dynamic MPPT performance under varying irradiance conditions affects the impact on overall PV system performance. This paper presents the improved MPPT algorithm by the simulation comparison with other algorithms. The simulation models are made by the Matlab & Simulink. The result of simulation, the dynamic MPPT efficiency of proposed algorithm is higher than the other algorithms.

• Nuclear Engineering and Technology
• /
• 제52권3호
• /
• pp.552-559
• /
• 2020

This paper presents an observer-based chattering free robust optimal control scheme to regulate the total power of a nuclear reactor. The non-linear model of nuclear reactor is linearized around a steady state operating point to obtain a linear model for which an optimal second order integral sliding mode controller is designed. A second order integral sliding mode observer is also designed to estimate the unmeasurable states. In order to avoid the chattering effect, the discontinuous input of both observer and controller are designed using the super-twisting algorithm. The proposed controller is realized by combining an optimal linear tracking controller with a second order integral sliding mode controller to ensure minimum control effort and robustness of the closed-loop system in the presence of uncertainties. The condition for the selection of gains of discontinuous control based on the super-twisting algorithm is derived using a strict Lyapunov function. Performance of the proposed observer based control scheme is demonstrated through non-linear simulation studies.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.333-336
• /
• 1992

In this paper, We propose a PID-type of self-tuning algorithm which is based on the parameter estimation and the minimization of the cost function. We use the CARIMA model for parameter estimation and determine the discrete PID controller parameters by minimizing the cost function which considers the quadratic deviations of the predicted output over the set-point as well as the control efforts. Also, The algorithm is extended by incorporating constraints of the control signal. Simulations are performed to illustrate the efficiency of the proposed method.

• Journal of Computational Design and Engineering
• /
• 제2권4호
• /
• pp.218-232
• /
• 2015

Piecewise linear (G01-based) tool paths generated by CAM systems lack $G_1$ and $G_2$ continuity. The discontinuity causes vibration and unnecessary hesitation during machining. To ensure efficient high-speed machining, a method to improve the continuity of the tool paths is required, such as B-spline fitting that approximates G01 paths with B-spline curves. Conventional B-spline fitting approaches cannot be directly used for tool path B-spline fitting, because they have shortages such as numerical instability, lack of chord error constraint, and lack of assurance of a usable result. Progressive and Iterative Approximation for Least Squares (LSPIA) is an efficient method for data fitting that solves the numerical instability problem. However, it does not consider chord errors and needs more work to ensure ironclad results for commercial applications. In this paper, we use LSPIA method incorporating Energy term (ELSPIA) to avoid the numerical instability, and lower chord errors by using stretching energy term. We implement several algorithm improvements, including (1) an improved technique for initial control point determination over Dominant Point Method, (2) an algorithm that updates foot point parameters as needed, (3) analysis of the degrees of freedom of control points to insert new control points only when needed, (4) chord error refinement using a similar ELSPIA method with the above enhancements. The proposed approach can generate a shape-preserving B-spline curve. Experiments with data analysis and machining tests are presented for verification of quality and efficiency. Comparisons with other known solutions are included to evaluate the worthiness of the proposed solution.

• Journal of Biosystems Engineering
• /
• 제36권5호
• /
• pp.314-318
• /
• 2011

Arm-type implements of tractor are mainly utilized for the slope land operation. The proposed hydraulic system was implemented to arm-type implements of tractor. An experiment was conducted to evaluate response characteristics of the designed arm-type implement control system attached by three-point hitch of tractor at various conditions, such as engine speed, pumping rate and cylinder input flow. Effects of the valve response time didn't affect engine speed. The flow rate of pump and cylinder changed to the pressure loss. Also, the pressure loss was within 2 MPa and the response characteristic was sufficient enough to use as the arm-type implement system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.890-895
• /
• 1990

A theoretical and experimental study of a single link flexible arm a tip mass is presented for the translational end-point positioning. The problem of shifting the end-point from its initial position to the commanded position by the amount of W $_{d}$ is considered for the open loop control such that the base follows up the given path function. The theoretical results are obtained by applying the method of the Laplace transform to the governing equation, and the solution is calculated by the method of numerical inversion. Experimental results are obtained and compared with the theoretical ones.s.

• 한국물환경학회지
• /
• 제23권6호
• /
• pp.829-836
• /
• 2007

For the purpose of managing non-point sources, water quality control basins (WQCBs) are often designed to capture rainfall events smaller than extreme events. The design rainfall statistics and runoff capture rates for sizing a WQCB should be derived from the local long-term continuous rainfall record. In this study, the 31-year continuous rainfall data recorded in Busan is analyzed to derive the synthesized runoff capture curve incorporated with SCS curve number.

• KIEE International Transaction on Systems and Control
• /
• 제12D권1호
• /
• pp.7-11
• /
• 2002

In this study, fur the shape-based image retrieval, a method using local differential invariants is proposed. This method calculates the differential invariant feature vector at every feature point extracted by Harris comer point detector. Then through vector quantization using LBG algorithm, all feature vectors are represented by a codebook index. All images are indexed by the histogram of codebook index, and by comparing the histograms the similarity between images is obtained. The proposed method is compared with the existing method by performing experiments for image database including various 1100 trademarks.