• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.860-867
• /
• 2009

본 논문에서 는 X-band FMCW Radar용 Microstrip Array Patch Antenna를 설계하여 제작하였으며 적층 구조를 채택하여 대역폭 특성을 개선하였다. 배열 안테나는 비유전율 2.33인 기판에 설계하였고, 적층 패치는 비유전율 4.6인 기판을 사용하였다. 배열 안테나와 적층 패치 사이에는 일정한 간격을 유지하기 위하여 공기와 유전율이 비슷한 폼 (foam)을 삽입하였다. 배열 안테나 제작 결과 설계 주파수 9GHz에서 반 전력 빔 폭은 $10.6^{\circ}$, 이득은 18.70dBi, 대역폭은 1.25GHz의 특성을 얻었다. 배열 안테나에 적층 구조를 추가한 결과 반 전력 빔 폭은 $15.17^{\circ}$, 이득은 15.85dBi, 대역폭은 2GHz의 특성을 얻었고, 향후 X-Band FMCW Radar에 응용하기 위해서는 배열 안테나의 대역폭은 유지한 채 이득을 개선할 필요가 있다.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.88-95
• /
• 2015

The thickness of adsorbed molecular layers is the most critical factor in studying thin-film lubrication, and it is the most essential parameter that distinguishes thin-film from thick-film lubrication analysis. The thin film between the shaft and bearing surface within a very narrow gap was considered. The general Reynolds equation has been derived for calculating thin-film lubrication parameters affecting the performance of the circular journal bearing. Investigation of the load-carrying capacity and pressure distribution for the journal bearing considering the adsorbed layer thickness has been carried out. A Reynolds equation appropriate for the journal bearing is used in this paper for the analysis, and it is discussed using the finite difference method of the central difference scheme. The parameters, such as eccentricity and attitude angle, are used for discussing the load-carrying capacity of the journal bearing. The results reported in this paper should be applied to analysis of the journal bearing with different lubrication factors. The steady-state analysis of the journal bearing is conducted using the Reynolds model under thin-film lubrication conditions. For a journal bearing, several parameters, such as a pressure, load capacity, and pressure components of the bearing can be obtained, and these results can be stored in a sequential data file for later analysis. Finally, their distribution can be displayed and analyzed easily by using the MATLAB GUI technique. The load-carrying capability of the journal bearing is observed for the specified operating conditions. This work could be helpful for the understanding and research of the mechanism of thin-film lubrication.

• 한국전자거래학회지
• /
• 제21권4호
• /
• pp.15-28
• /
• 2016

국내 무선인터넷 산업은 지속적으로 성장하여 향후 웹 접속의 대표기기는 PC가 아닌 모바일 디바이스가 될 것으로 전망된다. 이러한 모바일 디바이스 수요의 폭발적인 증가는 우리들의 시간 공간적 제한을 사라지게 하는 등 편리한 생활을 누릴 수 있도록 만들어 주었지만 정보격차 등 여러 가지 부작용도 나타나게 되었다. 본 논문에서는 모바일 기기를 활용한 콘텐츠 활용도와 모바일 인터넷에 대한 적극적 태도를 세대 간, 교육수준, 경제수준에 따라 분석하고 모바일 콘텐츠 활용의 높음이 적극적 태도에 영향을 주는지에 대해 분석하고자 한다. 연구결과, 연령대가 젊을수록, 교육수준이 높을수록, 경제수준이 높을수록 모바일 콘텐츠에 대한 이용도가 높고 모바일 인터넷 이용에 대한 적극적 태도도 높으며, 모바일 콘텐츠에 대한 이용도가 높을수록, 모바일 인터넷 이용에 대한 적극적 태도도 높다는 것을 확인하였다. 이러한 분석 결과는 모바일 콘텐츠의 활용, 적극적 태도에 개인 특성에 따른 격차를 파악하여 이를 완화시켜줄 정책에 활용하고자 한다.

• 농업과학연구
• /
• 제10권2호
• /
• pp.371-381
• /
• 1983

This study is aimed at identifying the economic effects of drainage improvement projects. The total area of poor drainage is equivalent to 170,000ha, 13% of the total area of paddy field in Korea. The development of poor drained paddy is an urgent problem considering the low rate of self-sufficiency of food grain and the limitation of farmer's income increase. Rapid development of Korean economy has brought labor shoriage in rural farming sector. Accordingly farm mechanization is an important agricultural policy to hike labor productivity and to save production costs of rice farming. The expected economic benefits of the drainage improvement project are derived from increasing land productivity, expanding double cropped area and farming the farm mechanization base in paddy fields. The economic and financial rate of return of the project are considered very important decision making criteria for project implementation by resource allocation. Therefore this study covered benefit and cost analysis of the sampled area, the estimated financial rate of returns in $Buy{\check{o}}$ and Jinsung are represented 15% and 51% respectively and the economic rate of returns in both project area are also showing 1% and 26% respectively. The rate of return of the projects has showed an outstanding variance according to the locational and natural characteristics of the project area. As showing the above economic rate of return, $Buy{\check{o}}$ is very low Jinsung is very high. But the financial rate of return of both projects are considered comparatively high. Cosequently, the drainage improvement projects should be promoted from the view point of farm income increase to make narrow the income gap between rural and urban incomes and farm mechanization to solve labor shortage in the rural area.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.65-65
• /
• 2010

In shipbuilding industry, welding position are usually flat and vertical position at the erection stage. Application of SAW and EGW for these positions makes it possible to achieve enhanced productivity and high quality. But owing to their large size and weight it is difficult to apply these techniques in short and narrow regions. To overcome this problem, our company developed light weight and compact size 4-axis welding carriage which perform 3D weaving. The purpose of this study is to explain the development and application of intelligent welding carriage using 3D weaving pattern that can fill a large amount of welds and thereby making it possible to achieve high quality of welding. This study shows 3D weaving pattern, development of weaving database, and skill of adaptive control response for the variable gap. Also, it shows the results of procedure qualification test for the AH-grade steel when applied to the intelligent welding carriage.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.651-658
• /
• 2005

The Non-parametric Analysis is powerful in data test especially for the non- normality water quality data. The data at three monitoring stations of the Tam-Jin River were evaluated for their normality using Skewness, Q-Q plot and Shapiro-Willks tests. Various constituent of water quality data including temperature, pH, DO, SS, BOD, COD, TN and TP in the period of January 1994 to December 2004 were used as dataset. Shapiro-Willks normality test was carried out for a test 5% significance level. Most water quality data except DO at monitoring stations 1 and 2 showed that data does not normally distributed. It is indicating that non-parametric method must be used for a water quality data. Therefore, a homogeneity was conducted by Mann-Whitney U test (p<0.05). Two stations were paired in three pairs of such stations. Differences between stations 1, 2 and stations 1, 3 for pH, BOD, COD, TN and TP were meaningful, but Tam-Jin 2 and 3 stations did not meaningful. In addition, a narrow gap of the water quality ranges is not a difference. Categories in which all three pairs of stations (1 and 2, 2 and 3, 1 and 3) in the Tam-Jin River showed difference in water quality were analyzed on TN and TP. The results of in this research suggest a right analysis in the homogeneity test of water quality data and a reasonable management of pollutant sources.

• 한국임상약학회지
• /
• 제27권2호
• /
• pp.69-76
• /
• 2017

Objective: This study was conducted to assess the current status of experiential education, by analyzing pharmacy students' satisfaction and evaluation for practice sites and preceptors for 3 years from 2014 through 2016. Methods: Students evaluated the practice sites and preceptors using a 5-point and a 4-point Likert scale, respectively. Analysis was performed based on the types of curriculums and practice sites. In addition, sub-analysis was conducted based on the types of health-system pharmacy and the community pharmacy. Results: Total 203 students responded to the survey questionnaires. The 3-year average score of students' satisfaction with practice sites was 4.25. In the sub-analysis conducted based on the types of health-system pharmacy, the score was higher in the tertiary hospital pharmacies than that of the general hospital pharmacies (4.49 vs. 4.06, P<0.001). For community pharmacy, the difference in the score of the 3-year analysis was not significant, depending on the types (4.51 vs. 4.33, P=0.054). The average score of students' evaluation on the preceptors was 3.37 in the 3-year analysis. The score was significantly higher for the preceptors of tertiary hospital pharmacies than those of general hospital pharmacies (3.61 vs. 3.25, P<0.001). For community pharmacy, no significant differences were found, depending on the types of pharmacy (3.53 vs. 3.43, P=0.309). Conclusion: The students' satisfaction with practice sites and preceptors in pharmacy experiential education was high. However, it varied greatly depending on the types of educational institutions. Mutual effort between university and educational institutions is required, to narrow the gap in the degree of students' satisfaction.

• 컴퓨터교육학회논문지
• /
• 제11권6호
• /
• pp.11-27
• /
• 2008

컴퓨터 실습수업에서 웹기반 학습을 도입하여 효과적이라는 연구결과가 많이 있지만 웹기반 학습은 교수자와의 정의적 교류를 통한 인간적 피드백의 부족과 웹기반 학습에 적응하지 못하는 학습자가 발생할 수 있다는 문제점들이 있다. 본 논문에서는 수준별 학습을 위해 웹기반 학습을 도입하고, 웹기반 학습의 문제점 보완과 학자자간 학업성취도 격차를 좁히기 위해 동료교수법을 결합한 혼합학습의 효과를 밝혔다. 실험적인 목적을 위해 고등학교 학습자를 두 그룹으로 나누고, 엑셀 교수-학습 시스템을 개발하여 이를 두 그룹 모두에 적용해 웹기반 수준별 기본학습을 선행하도록 하였다. 선행학습 후 실습문제 해결을 위해 웹기반 학습과 동료교수법을 비교집단과 실험집단에 각각 적용하였다. SPSS에 의해 분석된 학업성취도 평가 결과는 웹기반 선행학습과 동료교수법을 결합한 혼합학습이 하업성취도 향상에 긍정적인 효과가 있었다는 것을 보여주었다. 특히 혼합학습을 적용한 실험집단의 중 하위권 학습자들이 학업성취도에 있어 많은 향상을 보이며 상위권 학습자들과 격차를 좁힌 것이 실험집단의 전체 학업성취도 향상에 주요원인으로 분석되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.7-7
• /
• 2009

Lead telluride (PbTe) is a very promising thermoelectric material due to its narrow band gap (0.31 eV at 300 K), face-centered cubic structure and large average excitonic Bohr radius (46 nm) allowing for strong quantum confinement within a large range of size. In this work, we present the thermoelectric properties of individual single-crystalline PbTe nanowires grown by a vapor transport method. A combination of electron beam lithography and a lift-off process was utilized to fabricate inner micron-scaled Cr (5 nm)/Au (130 nm) electrodes of Rn (resistance of a near electrode), Rf (resistance of a far electrode) and a microheater connecting a PbTe nanowire on the grid of points. A plasma etching system was used to remove an oxide layer from the outer surface of the nanowires before the deposition of inner electrodes. The carrier concentration of the nanowire was estimated to be as high as $3.5{\times}10^{19}\;cm^{-3}$. The Seebeck coefficient of an individual PbTe nanowire with a radius of 68 nm was measured to be $S=-72{\mu}V/K$ at room temperature, which is about three times that of bulk PbTe at the same carrier concentration. Our results suggest that PbTe nanowires can be used for high-efficiency thermoelectric devices.

• 한국콘텐츠학회논문지
• /
• 제20권2호
• /
• pp.27-35
• /
• 2020

국내 반도체 산업은 수출 품목 1위이면 기술력 또한 경쟁국에 비해 높은 수준이다. 하지만 경쟁국들과의 기술 격차가 점점 줄어들고 있으며 강대국과의 무역마찰 등으로 인해 반도체 산업이 어려움에 직면해 있다. 따라서 이러한 상황에서 이를 극복하기 위해서는 반도체 기업들의 운영상 비효율성을 재정비하여 효율적인 생산 활동을 유도할 필요성이 있다. 이에 본 논문에서는 DEA 기업을 통해 반도체 산업의 경영 효율성을 분석하며 비효율적인 기업의 투사 값을 제시하며 벤치마킹의 대상이 될 수 있는 기업들의 참조 집합을 확인하고자 한다. 이를 위해 총 20개 고성장 전기·전자 기업들의 CCO와 BCC모형의 효율성과 규모 수익성(RTS)을 분석하였다. 분석 결과 BCC 효율성이 1인 기업은 총 13개, CCR 효율성이 1인 기업은 총 6개 기업으로 나타났다. 그리고 BCC, CCR 효율성이 모두 1인 기업은 총 6개 기업이었다. 또한 기업의 규모 수익성은 IRS가 10개 기업, CRS가 9개 기업 그리고 DRS가 11개 기업으로 분석되었으며 참조 빈도 분석에서는 BCC 모형에서는 11개 기업과 CCR 모형을 통해 6개 기업을 벤치마킹이 할 수 있는 기업으로 제시하였다. 이러한 결과는 반도체 기업들에게 비효율적인 운영환경을 개선할 수 있는 유용한 정보가 될 것이다.