• Carbon letters
• /
• v.9 no.4
• /
• pp.289-293
• /
• 2008

Naphtha Cracking Bottom (NCB) oil was heat reformed at various reforming temperature and time, and the volatile extracts were characterized including yields, molecular weight distributions, and representative compounds. The yield of extract increased as the increase of reforming temperature ($360{\sim}420^{\circ}C)$ and time (1~4 hr). Molecular weight of the as-received NCB oil was under 200, and those of extracts were distributed in the range of 100-250, and far smaller than those of precursor pitches of 380-550. Naphtalene-based compounds were more than 70% in the as-received NCB oil, and most of them were isomers of compounds bonding functional groups, such as methyl ($CH_{3^-}$) and ethyl ($C_2H_{5^-}$). When the as-received NCB oil was reformed at $360^{\circ}C$ for 1 hr, the most prominent compound was 1,2-Butadien, 3-phenyl- (24.57%), while naphthalene became main component again as increasing the reforming temperature.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.26 no.2
• /
• pp.219-224
• /
• 2016

Objectives: Lung cancer occurred with worker working in an urban bus garage. A survey was conducted to investigate whether lung cancer had causal relationship with work. Exposure to asbestos and diesel engine exhaust were suspected. Methods: Airborne asbestos was sampled on membrane filter and analyzed using phase-contrast microscopy. Airborne diesel exhaust was sampled using quartz filter and analyzed with thermal-optical analyzer. Polynuclear aromatic hydrocarbons was sampled using PTFE filter and XAD-2 tube and analyzed with gas chromatography-mass selective detector. Results: Airborne asbestos concentration was under 0.01 fiber/cc. Worker who warmed up an engine of urban bus for 2 hours was exposed to elemental carbon concentration, $15.5{\mu}g/m^3$. Only naphtalene among polynuclear aromatic hydrocarbons was detected. Conclusions: It was difficult to conclude about worker exposure to asbestos because working hour related asbestos was too short. In reviewing papers, the exposure to asbestos over 0.01 fiber/cc during exchange brake lining was found. It was identified that worker's occupational exposure to diesel exhaust based on elemental carbon was higher than the other occupational exposure to diesel exhaust.

• Journal of Korea Soil Environment Society
• /
• v.4 no.3
• /
• pp.25-33
• /
• 1999

The recent emergence of biofiltration as a cost effective waste-gas control technology has stimulated in European countries and the USA. Biofiltration of soil vapor extraction off-gas from gasoline contaminated site was simulated in lab-scale in this study. A filling material used was a compost. This study was conducted to evaluate biofiltration characteristics of the compost material for gasoline off-gas. TPH elimination capacity at the gas loading rate of about 50g/$\textrm{m}^3$((filling material)/hr was circa 40g/$\textrm{m}^3$((filling material)/hr. Removal rate of xylene was the highest among BTEX. while it was the lowest in case of bezene. The maximum elimination capacity of the compost was about 1.5g/$\textrm{m}^3$((filling material)/hr for benzene. More than 95% of trimethylbenzene and naphtalene were removed below the loading rate of 0.7g/㎥(filling material)/hr. About 80% of total TPH and BTEX were removed by biodegradation.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.67-76
• /
• 2020

Polycyclic aromatic hydrocarbons (PAHs) are organic compounds that tend to persist in environmental media for a long period of time. This work presents a 2-year monitoring study of occurrence of three PAHs (benzo(a)pyrene, naphthalene, and fluoranthene) in groundwater. The groundwater samples were collected from 106 sites of nation's groundwater quality monitoring network and analyzed by simultaneous analysis method to quantify the concentrations of the PAHs. Benzo(a)pyrene was not detected in all samples. Naphthalene and fluoranthene concentrations ranged from not detected to 12.8 ng/L and not detected to 10.5 ng/L with their detection frequency being 57.8 and 4.2%, respectively. The concentrations of PAHs in ground- and drinking waters are not currently regulated in Korea, but the concentration levels of naphthalene and fluoranthene found in this work were lower than the regulatory limits of other countries (naphthalene 0.001~0.07 mg/L, fluoranthene 0.001~1.4 mg/L). The monitoring result of this study revealed that PAHs exist as trace amounts in domestic groundwater, however continuos monitoring is necessary to protect groundwater from PAHs contamination with growing industrialization and urbanization.

• Horticultural Science & Technology
• /
• v.30 no.1
• /
• pp.13-20
• /
• 2012

This study was carried out to examine the effect of cutting condition on the growth of rooted cuttings and their subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'. The more leaves were attached to the cutting, the higher shoot growth of rooted cutting was observed. Cutting with two to six leaves was effective in shoot growth and rooting than any other treatment. Shoot growth of rooted cutting was not affected by cutting length, but rooting was better in 5 to 7 cm long cutting. Shoot growth and rooting of rooted cutting was promoted by increasing the cutting diameter, and rooting was better in 3.6-4.2 mm thick cutting than 3.1 mm thick cutting. As the treating concentration of NAA increased, shoot growth was inhibited and root length shortened in rooted cutting. Soaking with $100mg{\cdot}L^{-1}$ ${\alpha}$-naphtalene acetic acid (NAA) for 1 h was effective in shoot growth and rooting. Root growth such as root number, root length, and root weight was better in rooting medium mixed with 2:2 of peatmoss:perlite than the other treatments. When rooted cutting produced from cutting with four or six leaves was planted, better length, weight, and leaf number of cut flower was observed. In rooted cutting produced with 7-9 cm long cutting, growth of cut flower such as length, weight, and ray flower number was more effective than the others. Therefore, it is recommended that the 7 cm long and 3.6 mm thick cutting with four to six leaves is used to improve their rooting and subsequent growth of cut flower in plug cutting of Dendranthema grandiflorum 'Baekma'.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.678-684
• /
• 2010

In an attempt to improve biomass and bioactive compound production, we cultured adventitious roots of $Eleutherococcus$ $koreanum$ in 250 mL Erlenmeyer flasks using Murashige and Skoog (MS) medium with different concentrations of auxins (IBA, NAA, IAA) and cytokinins (BA, kinetin, TDZ). Root biomass (fresh and dry weight) was enhanced at $5mg{\cdot}L^{-1}$ indole-3-butyric acid (IBA) after 5 weeks of culture. The content of total phenolics and flavonoids was also increased with $5mg{\cdot}L^{-1}$ IBA compared to ${\alpha}$-naphtalene acetic acid (NAA) or indole-3-acetic acid (IAA) treatments. The combination of $5mg{\cdot}L^{-1}$ IBA with $0.1mg{\cdot}L^{-1}$ thidiazuron (TDZ; N-phenyl-N'-1,2,3,-thidiazol-5-ylurea) enhanced root fresh and dry weight (1.4- and 1.6-fold, respectively) as well as the content of total phenolics and flavonoids compared to the relative control (without cytokinin). On the contrary, $N_6$-benzyladenine (BA) and 6-furfurylaminopurine (kinetin) did not significantly affect root biomass and bioactive compound production in adventitious roots of $E.$ $koreanum$. These results suggested that $5mg{\cdot}L^{-1}$ IBA combination with $0.1mg{\cdot}L^{-1}$ TDZ supplementation was most suitable for both biomass and bioactive compound production from adventitious roots of $E.$ $koreanum$.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.205-212
• /
• 1987

To examine the morphogenetic response, stem segments of 8 Populus spp. and 3 different explants of P. nigra var. italica were cultured on MS (Murashige and Skoog 1962) and WPM (Woody Plant Medium) medium containing various phytohormones. The results obtained were as follows: 1. Shoot regeneration and development from stem segment of 8 Populus spp. showed a quite difference according to the section and the species. All of the species of Leuce and Tacamahaca section did not form adventitious buds, while most of explants showed axillary or dormant bud elongation after 4 weeks. But P. nigra var. italica of Aigeiros section showed a successful adventitious bud formation (mean 5.4 buds per explant). 2. Leaf, petiole, and internode segment of P. nigra var. italica showed a quite differences according to media and ex plants upon the morphogenetic response. Adventitious bud formation from leaf was more abundant and readily initiated on the abaxial side than on the adaxial side. Mean number of 103 adventitious buds per explant was obtained from abaxial side of leaf segment cultured on WPM medium containing $0.2mg/{\ell}$ BAP for 5 weeks. 3. 2,4-D (2,4-dichlorophenoxy acetic acid) supplemented to media appeared to be negative upon the adventitious bud formation of P. nigra var. italica, while it promoted callus formation from all explants. Especially, NAA (${\alpha}$-naphtalene acetic acid) or NAA combination with BAP (6-benzylaminopurine) promoted root regeneration from the all explant of P. nigra var. italica in this study.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.805-811
• /
• 2004

In this paper, effects of mixture proportion and material condition on both fundamental properties, drying and autogenous shrinkage of high performance concrete are discussed. According to the results, for the effect of mixture proportion on the fundamental properties, decrease in W/B and unit water content results in reduction of fluidity, while air content has no variation. Compressive strength exhibits an decreasing tendency with an increase in W/B and unit water content do not remarkable affect the compressive strength. For the effect of materials on the fluidity, the fluidity of low heat portland cement(LPC) is smaller than that of ordinary portland cement(OPC). The use of Polycarbonic acid based superplasticizer(PS) has more favorable effect on enhancing fluidity than Naphtalene based superplasticlzer(NS) and Melamine based superplasticizer(MS). Air content of concrete using LPC is larger than that using OPC. The effects of superplasticizer type on the air content is larger in order of MS, PS and NS. The use of LPC exhibited lower strength development at early age than OPC, whereas after 91days, similar level of compressive strength is achieved regardless of cement type. Compressive strength of concrete is not affected by SP type. For the effect of mixture proportion and materials on drying and autogenous shrinkage, an increase in W/B results in reduction of drying shrinkage and an decrease in water content leads to reduce drying shrinkage. Autogenous shrinkage is not observed until 49 days with the concrete mixture with $35\%$ of W/B and $145 kg/m^3$ of water content. This is due to the combination effects of expansion admixture and shrinkage reducing admixture, which causes an offset of autogenous shrinkage. The use of LPC results in a reduction in autogenous shrinkage compared with OPC. SP type has little influence on the autogenous shrinkage. It is found from the results that mixture proportioning of high performance concrete incorporating fly ash, silica fume, expansion admixture and shrinkage reducing admixture is need to focus on the increase in W/B and the reduction in water content and the use of LPC and MS is also required to use to secure the stability against shrinkage properties.

• Analytical Science and Technology
• /
• v.11 no.1
• /
• pp.62-72
• /
• 1998

This study was performed to characterize the trace organic pollutants in the industrial wastewater and to establish the database of the trace organic pollutants. The four manufacturing industries, which are refined petroleum, industrial chemicals, rubber & plastics and fabricated metals, were surveyed. The wastewater and discharging water of these 30 factories are analyzed to characterize the trace organic pollutants. In industrial chemicals, the kinds of products and organic pollutants are very various. Therefore to select the characteristic organic pollutants in this categories are also very difficult. In industrial chemicals, the gas chromatograpic peak patterns of wastewater are represented the various type according to their products, therefore the typical patterns of the characteristic organic pollutants could not be obtained because the kinds of manufactured goods and organic pollutants are very various. In refined petroleum, the effluent is discharged in the distillatory process of atmosphere pressure and contained the saturated hydrocarbons, phenol compounds, benzene compounds and naphtalene compounds. The saturated hydrocarbons peaks from $C_{15}$ to $C_{35}$ are represented the typical oil patterns by the uniform intervals therefore the peak can be easily distinguished. In rubber & plastics, the wastewater is discharged in the washing process which contains the additives. The problem of wastewater is not serious because the manufacturing process is not produced the effluent or the produced cooling water is recycled in that process.