• 한국진공학회지
• /
• 제18권1호
• /
• pp.73-78
• /
• 2009

본 연구에서는 metal oxide chemical vapor deposition (MOCVD)을 이용하여 p형 실리콘(100) 기판 위에 30 nm 두께의 산화 아연 완충층을 $500^{\circ}C$ 에서 증착 시킨 후, 그 위에 산화 아연 나노로드를 수열합성법을 이용하여 성장시켰다. 그리고 산화아연 나노로드 성장 시 0.02몰${\sim}$0.5몰의 다양한 농도의 전구체를 사용함으로써 그에 따라 변화되는 산화 아연 나노로드의 배열상태, 구조적, 그리고 광학적 특성 평가를 실시하였다. 특성 평가는 FE-SEM(field emission scanning electron microscopy), XRD(X-ray diffraction), 그리고 PL(photoluminescence) 등의 분석 방법들을 통해 이루어졌다 본 연구를 통하여 전구체의 농도가 증가할수록 나노로드의 직경과 길이가 길어지며 0.3몰의 농도에서 뛰어난 광학 특성이 나타나는 것을 발견할 수 있었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.99-99
• /
• 2005

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제34회 동계학술대회 초록집
• /
• pp.244-244
• /
• 2008

• 한국재료학회지
• /
• 제24권1호
• /
• pp.19-24
• /
• 2014

We report the nitrogen monoxide (NO) gas sensing properties of p-type CuO-nanorod-based gas sensors. We synthesized the p-type CuO nanorods with breadth of about 30 nm and length of about 330 nm by a hydrothermal method using an as-deposited CuO seed layer prepared on a $Si/SiO_2$ substrate by the sputtering method. We fabricated polycrystalline CuO nanorod arrays at $80^{\circ}C$ under the hydrothermal condition of 1:1 morality ratio between copper nitrate trihydrate [$Cu(NO_2)_2{\cdot}3H_2O$] and hexamethylenetetramine ($C_6H_{12}N_4$). Structural characterizations revealed that we prepared the pure CuO nanorod array of a monoclinic crystalline structure without any obvious formation of secondary phase. It was found from the gas sensing measurements that the p-type CuO nanorod gas sensors exhibited a maximum sensitivity to NO gas in dry air at an operating temperature as low as $200^{\circ}C$. We also found that these CuO nanorod gas sensors showed reversible and reliable electrical response to NO gas at a range of operating temperatures. These results would indicate some potential applications of the p-type semiconductor CuO nanorods as promising sensing materials for gas sensors, including various types of p-n junction gas sensors.

• 한국진공학회지
• /
• 제20권3호
• /
• pp.211-216
• /
• 2011

본 연구에서는 수열합성법으로 성장시킨 정렬된 산화아연 나노로드의 성장온도에 따른 구조적, 광학적 특성이 조사되었다. Zinc nitrate ($Zn(NO_3)_2$)와 hexamethylenetetramine가 전구체로 사용되었으며 40 nm 두께의 산화아연 버퍼막이 증착된 실리콘 (100) 기판이 사용되었다. 산화아연 나노로드는 $55^{\circ}C$에서 $115^{\circ}C$까지의 성장 온도에서 40 nm 산화아연 버퍼레이어 위에 성장되었다. 결과 분석을 위하여 FE-SEM, XRD, PL 방법 등이 사용되었다. 분석 결과, 잘 정렬된 산화아연 나노로드가 모든 샘플에서 관찰되었다. $95^{\circ}C$ 이하의 증착 온도에서 성장된 산화아연 나노로드의 끝부분은 평평하였으며, $115^{\circ}C$의 증착 온도에서 성장된 산화아연 나노로드의 끝부분은 날카로운 바늘모양의 형태를 나타내었다. 또한 $115^{\circ}C$의 증착 온도에서 비평형 성장때문에 엉킨 나노 구조물이 부분적으로 생성되었다. 성장 온도는 산화아연의 구조적, 광학적 특성에 영향을 미칠 수 있다. 구조적 특성의 경우 성장 온도가 $75^{\circ}C$까지 증가함에 따라 XRD (002) 피크 세기가 증가했고, 성장온도가 $115^{\circ}C$까지 계속적으로 증가함에 따라 피크의 크기는 다시 감소하였다. 광학적 특성에서는, 성장 온도가 증가함에 따라 가시광선 영역 피크 세기에 대한 UV 피크 세기 비율이 증가하였고, $95^{\circ}C$의 성장온도에서는 가장 큰 UV 피크의 세기를 얻을 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.49-49
• /
• 2010

Nanopiezotronics is an emerging area of nanotechnology with a variety of applications that include piezoelectric field-effect transistors and diodes, self-powered nanogenerators and biosystems, and wireless nano/biosensors. By exploiting coupled piezoelectric and semiconducting characteristics, it is possible for nanowires, nanobelts, or nanorods to generate rectifying current and potential under external mechanical energies such as body movement (handling, winding, pushing, and bending) and muscle stretching, vibrations (acoustic and ultrasonic waves), and hydraulic forces (body fluid and blood flow). Fully transparent, flexible (TF) nanogenerators that are operated by external mechanical forces will be presented. By controlling the density of the seed layer for ZnO nanorod growth, transparent ZnO nanorod arrays were grown on ITO/PES films, and a TF conductive electrode was stacked on the ZnO nanorods. The resulting integrated TF nanodevice (having transparency exceeding 70 %) generated a noticeable current when it was pushed by application of an external load. The output current density was clearly dependent on the force applied. Furthermore, the output current density depended strongly on the morphology and the work function of the top electrode. ZnO nanorod-based nanogenerators with a PdAu, ITO, CNT, and graphene top electrodes gave output current densities of approximately $1-10\;uA/cm^2$ at a load of 0.9 kgf. Our results suggest that our TF nanogenerators are suitable for self-powered TF device applications such as flexible self-powered touch sensors, wearable artificial skins, fully rollable display mobile devices, and battery supplements for wearable cellular phones.

• 한국표면공학회지
• /
• 제51권6호
• /
• pp.365-371
• /
• 2018

1D core-shell nanostructures have attracted great attention due to their enhanced physical and chemical properties. Specifically, oriented single-crystalline $TiO_2$ nanorods or nanowires on a transparent conductive substrate would be more desirable as the building core backbone. However, a facile approach to produce such structure-based hybrids is highly demanded. In this study, a three-step hydrothermal method was developed to grow NiMn-layered double hydroxide-decorated $TiO_2$/carbon core-shell nanorod arrays on transparent conductive fluorine-doped tin oxide (FTO) substrates. XRD, SEM, TEM, XPS and Raman were used to analyze the obtained samples. The in-situ fabricated hybrid nanostructured materials are expected to be applicable for photoelectrode working in water splitting.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2008년도 제34회 동계학술대회 초록집
• /
• pp.88-88
• /
• 2008

• 진공이야기
• /
• 제3권2호
• /
• pp.17-20
• /
• 2016

Piezoelectric nanogenerators are energy harvesting device to convert a mechanical energy into an electric energy using nanostructured piezoelectric materials. This review summarizes works to date on piezoelectric nanogenerators, starting with a basic theory of piezoelectricity and working mechanism, and moving through the reports of numerous nanogenerators using nanorod arrays, flexible substrates and alternative materials. A sufficient power generated from nanogenerators suggests feasible applications for either power supplies or strain sensors of highly integratedl nano devices. Further development of nanogenerators holds promise for the development of self-powered implantable and wearable electronics.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.226-226
• /
• 2013

Si is a dominant solar material, which is the second most abundant element in the earth giving a benefit in the aspect in cost with low toxicity. However, the inherent limit of Si has an indirect band gap of 1.1 eV resulting in the limited optical absorption. Therefore, a critical issue has been raised to increase the utilization of the incident light into the Si absorber. The enhancement of light absorption is a crucial to improve the performances and thus relieves the cost burden of Si photovoltaics. For the optical aspect, an efficient design of a front surface, where the incident light comes in, has been intensively investigated to improve the performance of photon absorption. Lambertian light trapping can be attained when the light active surface is ideally rough to increase the optical length by about 50 compared to a planar substrate. This suggests that an efficient design may reduce thickness of the Si absorber from the conventional 100~300 ${\mu}m$ to less than 3 ${\mu}m$. Theoretically, a hole-array structure satisfies an equivalent efficiency of c-Si with only one-twelfth mass and one-sixth thickness. Various approaches have been applied to improve the incident light utilization in a Si absorber using textured structures, periodic gratings, photonic crystals, and nanorod arrays. We have designed hole and pillar structured Si absorbers. Four-different Si absorbers have been simultaneously fabricated on an identical Si wafer with hole arrays or pillar arrays at a fixed depth of 2 ${\mu}m$. We have found that the significant enhanced solar cell performances both for the hole arrayed and pillar arrayed Si absorbers compared to that of a planar Si wafer resulting from the effective improvement in the quantum efficiencies.