• Journal of the Optical Society of Korea
• /
• 제18권6호
• /
• pp.799-808
• /
• 2014

The mechanism of optical interaction of two nanoholes, milled in an opaque gold film, by means of surface plasmon polariton (SPP) propagation is investigated. The interaction depends on the polarization direction of the incident light when the nanohole pair is illuminated through uniform single antenna excitations. It is shown that by illuminating one of the nanoholes, under single antenna excitation, the other nanohole can be excited indirectly via propagated SPPs from the excited nanohole. In addition, it is found that the spectrum of electromagnetic power above the surface of the metallic film at an arbitrary point along the axis of the nanohole pair presents two resonant peaks. These peaks are due to the optical interaction between nanoholes, where the short- and long-wavelength peaks can be assigned to in-phase and antiphase interactions of magnetic dipoles relative to each nanohole, respectively. The magnetic coupled dipole approximation (MCDA) method confirms the simulation results.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.692-693
• /
• 2002

Well-aligned multi-wall carbon nanotubes (MWNTs) were fabricated by utilizing a radio frequency plasma-enhanced chemical vapor deposition (rf-PECVD) system from Ni particles at the bottom of anodic alumina nanoholes (AAN). To remove the amorphous graphite layers on the AAN surface and to eliminate the protrusion of MWNT tips, the AAN surface with MWNTs were treated by external rf plasma source. As a result, the AAN surface almost became flat without having any protrusion of MWNT tips. The diameter, length of MWNTs and AAN were investigated by using a scanning electron microscopy (SEM). Raman spectroscopy was also used to characterize wall structure of the carbon nanotube. And the emission properties of the MWNTs were measured for the application of field emission display (FED) in near future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.106-107
• /
• 2007

We fabricated anodic aluminium oxides (AAO) on Si and sapphire substrates from the electrochemical reactions of thin AI films in an aqueous solution of oxalic acid. The thin AI films have deposited on Si and Sapphire substructure by using E-beam evaporation and thermal evaporation, respectively. The formation of AAO structures has investigated from FE-SEM measurement image and showed randomly distributed phase of nanoholes instead of the periodic lattice of photonic crystals. The AAO structure on sapphire shows the double layers of nanoholes.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.465-472
• /
• 2008

나노재료의 합성이나 나노구조물질의 제작은 나노기술을 기반으로 하는 전자소자를 구현하기 위해서 많은 연구가 진행되고 있다. 나노다공성 알루미나 마스크(nanoporous alumina mask) 를 이용하여 균일도와 정렬도가 우수한 나노구조물들을 제조할 수 있고 이들의 크기와 밀도는 알루미나 마스크의 동공의 직경과 동공밀도를 조절하여 제어할 수 있다. 이러한 방법은 낮은 비용으로 나노구조물의 대면적 제조 공정 개발이 가능하고, 정보통신기술와 바이오기술-나노기술을 융합하는 새로운 물질의 제조에 응용할 수 있을 것이다. 그러므로, 알루미나 마스크를 사용하여 다양한 크기와 밀도를 갖는 나노물질을 제조하는 기술은 새로운 형태의 다양한 전자소자의 구현을 위해 가능성이 큰 기술이라 할 것이다. 본 논문에서는 나노다공성 알루미나 마스크를 제조하는 기술과 이를 이용한 양자점(quantum dots), 나노홀(nanoholes), 나노막대(nanorods) 등의 나노구조물 제조와 그 구조물의 응용성에 대해 알아보고자 한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.7.1-7.1
• /
• 2011

Nanoporous templates have been widely used for the development of new functional nanostructured materials suitable for electronics, optics, magnetism, and energy storage materials. We have prepared nanoporous templates by using thin films of mixtures of polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) and PMMA homopolymers. These templates have cylindrical nanoholes spanning the entire thickness of the film. Some applications of nanoporous templates are introduced: a) anti-reflective coating, b) the preparation of conducting polymer nanowires of poly (pyrrole), poly (3,4-ethylenedioxy-thiopene) onto a glass coated with indium-tin-oxide, and c) the separation membranes for biomaterials. We found that when the pore fraction of nanoholes in the film was ~0.68, almost zero reflectance at a specific wavelength, which can be changed with film thickness, was achieved at visible wavelengths Furthermore, ultra high density array of conducting nanowires was successfully prepared onto various substrates including flexible polymer. Due to highly alignment of polymer chain along the nanowire direction, the conductivity was much increased. Furthermore, these nanoporous films were found to be very effective for the separation of human Rhinovirus type 14 (HRV 14), major pathogen of a common cold in humans, from the buffer solution. We also found that when the pore size was effectively controlled down to 6 nm, a single file diffusion was observed.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.234-237
• /
• 2007

We fabricated nano-structures of the anodic aluminum oxides on sapphire substrates. Two processes of nano-structured sapphire surface have present: the one is the template mask and the other is the anodic oxidized aluminum deposited on sapphire substrate. The formation of nano-structures has investigated by FE-SEM measurement. The etched surface by the template showed periodic lattice but the deposited surface showed the randomly distributed phase of nanoholes instead of the periodic lattice.

• 한국정밀공학회지
• /
• 제28권1호
• /
• pp.24-30
• /
• 2011

PC-TEMs (Polycarbonate Track-Etched membranes) were micro-drilled for biomedical applications by ultrafast pulsed laser. The ablation and damage characteristics were studied on PE-TEMs by assuming porous thin membranes. The experiments were conducted in the range of 2.02 $J/cm^2$ and 8.07$J/cm^2$. The ablation threshold and damage threshold were found to be 2.56$J/cm^2$ and 1.14$J/cm^2$, respectively. While a conical shaped drilled holes was made in lower fluence region, straight shaped holes were drilled in higher fluence region. Nanoholes made the membrane as porous material and ablation characteristics for both bulk and thin film membranes were compared.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.312-312
• /
• 2006

Block copolymers with well-defined nanoscopic structures have recently gained much attention for their potential uses as functional nanostructures. Here, we show that nanoporous templates made from polystyrene-block-poly (methyl methacrylate) (PS-b-PMMA) satisfy a novel design concept. At first, arrays of nanoscopic cylindrical microdomains oriented normal to the surface can easily be prepared. Then, we fabricated ultra high density arrays of conducting polymer as poly(pyrrole) (Ppy) and poly(3,4-ethylenedioxythiophene) (PEDOT) nanowires with diameters of $25{\sim}40\;nm$ on the ITO glass by electropolymerization of the monomers inside nanoholes. These high density arrays of conducting polymer nanowires could be used as P-type materials for photovoltaic devices.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.18-22
• /
• 2006

Although many efforts have been made in making nanometer-sized holes, there is still a major challenge in fabricating individual single-digit nanometer holes in a more controllable way for different materials, size distribution and hole shapes. In this paper we describe our efforts to use a top down approach in nanofabrication method to make single-digit nanoholes. There are three major steps towards the fabrication of a single-digit nanohole. 1) Preparing the freestanding thin film by epitaxial deposition and electrochemical etching. 2) Making sub-micro holes ($0.2{\mu}\;to\;0.02{\mu}$) by focused ion beam (FIB), electron beam (EB), atomic force microscope (AFM), and others methods. 3) Reducing the hole size to less than 10 nm by epitaxial deposition, FIB or EB induced deposition and micro coating. Preliminary work has been done on thin films (30 nm in thickness) preparation, sub-micron hole fabrication, and E-beam induced deposition. The results are very promising.

• 센서학회지
• /
• 제22권3호
• /
• pp.185-190
• /
• 2013

We report on direct finding of how the morphology (i.e. filopodia width) of $CD4^+$ T lymphocytes correlates with the size of the quartz nanohohole arrays (QNHAs, 140, 200, 270, and 550 nm in diameter) via scanning electron microscopy (SEM). This research exhibits that the filopodia of $CD4^+$ T-lymphocytes extended on the QNHA substrates were observed to increase in width by increasing the size of QNHA in diameter from 140 to 550 nm. This strong linear response ($R^2$=0.988, n = 6) in filopodia's width of surface-bound $CD4^+$ T-cells with topographical structures of QNHA can be explained by contact guidance between the cells and solid-state substrates. Furthermore, this research suggests that the protruded filopodia of surface-bound T-lymphocytes can be used as a biosensor for sensing the topographical information of the nano-patterned substrates.