• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.377-382
• /
• 2010

젤 추진제와 유변학적 특성이 유사한 모사 젤 추진제를 물, Carbopol 941, NaOH 농축액을 혼합하여 제작하였고, $Al_2O_3$ 나노 입자를 첨가하여 점도 특성을 비교하였다. 두 가지 모사 추진제의 물성치를 바탕으로 곡관 덕트 내에서의 유동특성을 수치모사하여 해석하였고 덕트에 Dean vortices가 발생하는 임계 Dean 수를 도출하였다. 젤-나노 추진제의 경우 비록 높은 겉보기 점성계수를 가지나 젤 추진제와 비교시 같은 범위의 임계 Dean 수가 도출되었다. 이는 Fellouah et al.[1]이 제시한 바와 같이 비슷한 값의 Power law 지수에 기인하는 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제33권2호
• /
• pp.141-147
• /
• 2008

본 연구의 목적은 나노리터 수준의 물 흐름을 계측할 수 있는 장치를 개발하고, 상아질의 물 투과성을 측정하여 치아과민증 치료제와 상아질 접착제의 상아세관 밀폐효과를 알아보고자 하였다. 본 연구에서 제작한 미세흐름 측정장치는 첫째, 물의 흐름을 감지하는 모세관과 광 센서부, 둘째 물의 흐름을 추적하는 서보모터와 구동부, 셋째, 모터의 회전을 측정하여 물의 이동량으로 변환하는 엔코더와 컴퓨터 기록장치 등 세 부분으로 구성되어 있다. 본 장비를 이용하여 교합 면이 절단되어 노출된 상아질의 물 투과도와 치아과민증 치료제인 BisBlock과 자가부식형 상아질접착제인 Clearfil SE bond의 상아질 밀폐효과를 측정하여 다음과 같은 결과를 얻었다. 1. 나노리터 수준의 물 흐름을 측정할 수 있는 장치를 제작하였고, 이를 이용하여 상아질의 물 투과도를 측정할 수 있었다. 2. 삭제 후 노출 연마된 상아질은 0.84 - 15.2 nL/s의 물 투과도를 보였고 Oxalate 제재인 BisBlock 이나 자가부식형 접착제 Cleafil SE bond 적용 시 투과도가 39.8 - 89.6% 감소하였다.

• Advances in nano research
• /
• 제16권6호
• /
• pp.565-577
• /
• 2024

Vibration investigation of fluid-filled functionally graded cylindrical shells with ring supports is studied here. Shell motion equations are framed first order shell theory due to Sander. These equations are partial differential equations which are usually solved by approximate technique. Robust and efficient techniques are favored to get precise results. Employment of the Rayleigh-Ritz procedure gives birth to the shell frequency equation. Use of acoustic wave equation is done to incorporate the sound pressure produced in a fluid. Hankel's functions of second kind designate the fluid influence. Mathematically the integral form of the Langrange energy functional is converted into a set of three partial differential equations. A cylindrical shell is immersed in a fluid which is a non-viscous one. These shells are stiffened by rings in the tangential direction. For isotropic materials, the physical properties are same everywhere where the laminated and functionally graded materials, they vary from point to point. Here the shell material has been taken as functionally graded material. After these, ring supports are located at various positions along the axial direction round the shell circumferential direction. The influence of the ring supports is investigated at various positions. Effect of ring supports with empty and fluid-filled shell is presented using the Rayleigh - Ritz method with simply supported condition. The frequency behavior is investigated with empty and fluid-filled cylindrical shell with ring supports versus circumferential wave number and axial wave number. Also the variations have been plotted against the locations of ring supports for length-to-radius and height-to-radius ratio. Moreover, frequency pattern is found for the various position of ring supports for empty and fluid-filled cylindrical shell. The frequency first increases and gain maximum value in the midway of the shell length and then lowers down. It is found that due to inducting the fluid term frequency result down than that of empty cylinder. It is also exhibited that the effect of frequencies is investigated by varying the surfaces with stainless steel and nickel as a constituent material. To generate the fundamental natural frequencies and for better accuracy and effectiveness, the computer software MATLAB is used.

• Composites Research
• /
• 제21권2호
• /
• pp.15-24
• /
• 2008

본 연구에서는 Kevlar 직물에 전단농화 특성을 갖는 나노 실리카 입자를 함침시켜 저속충격 특성 및 마찰특성 실험을 수행하였다. 나노입자의 크기에 따른 영향력을 평가하기 위해 100nm, 300nm, 500nm 직경크기의 구형 실리카 입자를 충진한 전단농화유체를 제작하였으며 유변물성 시험을 통해 전단담화 현상 및 급격히 점성이 증가하는 전단농화현상을 확인하였다. 전단농화유체를 Kevlar 직물에 함침시켜 저속 낙하 충격시험을 수행한 결과 나노입자 처리를 한 Kevlar 직물에서 우수한 충격흡수 특성을 보였으며 특히 함침된 나노입자의 크기가 작을수록 충격흡수양이 증가하였고 변형의 양도 가장 적게 나타났다. Kevlar 직물 내에서의 얀의 Pull-out 실험과 직물간 마찰력 실험을 통해 나노입자의 크기가 작을수록 전단농화 현상으로 인한 마찰력의 증가가 더욱 크게 나타남을 확인하였다. 이러한 마찰력의 증가가 얀의 Pull-out 에너지를 증가시키게 되어 주요 충격흡수 메커니즘으로 작용하게 되는 것이다.

• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.220-224
• /
• 2017

본 논문에서는 전기절연판이나 접착제로 널리 사용되는 페놀수지를 초임계 유체를 이용하여 카본입자로 재활용 하는방법을 연구 하였다. 폐페놀수지는 불융/불용 특성으로 대부분 매립하거나 소각처리하고 있으며, 환경오염 방지차원에서 페놀수지의 새로운 재활용 기술 개발이 매우 필요한 실정이다. 폐페놀수지를 재활용하기 위해 다양한 아/초임계 용매(에탄올, 아세톤, 물, 메탄올)를 선정하여 처리하였다. 그 결과 기존의 카본입자의 제조 방법들 보다 훨씬 낮은 온도 조건($350{\sim}380^{\circ}C$)에서 카본입자를 제조할 수 있었다. 본 연구에서는 재활용된 카본입자의 FT-IR, XRD, TGA, SEM, EDS 분석을 통하여 반응용매에 따른 카본입자의 특성을 고찰하였으며, 모든 용매에 대해 동일한 화학구조 및 비정질 구조를 가지는 카본입자를 제조 할 수 있었다.

• 설비공학논문집
• /
• 제23권6호
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Advances in nano research
• /
• 제16권4호
• /
• pp.341-352
• /
• 2024

This study investigates the heat and mass transfer characteristics of a MoS₂ nanoparticle suspension in ethylene glycol over a porous stretching sheet. MoS₂ nanoparticles are known for their exceptional thermal and chemical stability which makes it convenient for enhancing the energy and mass transport properties of base fluids. Ethylene glycol, a common coolant in various industrial applications is utilized as the suspending medium due to its superior heat transfer properties. The effects of variable thermal conductivity, variable mass diffusivity, thermal radiation and thermophoresis which are crucial parameters in affecting the transport phenomena of nanofluids are taken into consideration. The governing partial differential equations representing the conservation of momentum, energy, and concentration are reduced to a set of nonlinear ordinary differential equations using appropriate similarity transformations. R software and MATLAB-bvp5c are used to compute the solutions. The impact of key parameters, including the nanoparticle volume fraction, magnetic field, Prandtl number, and thermophoresis parameter on the flow, heat and mass transfer rates is systematically examined. The study reveals that the presence of MoS₂ nanoparticles curbs the friction between the fluid and the solid boundary. Moreover, the variable thermal conductivity controls the rate of heat transfer and variable mass diffusivity regulates the rate of mass transfer. The numerical and statistical results computed are mutually justified via tables. The results obtained from this investigation provide valuable insights into the design and optimization of systems involving nanofluid-based heat and mass transfer processes, such as solar collectors, chemical reactors, and heat exchangers. Furthermore, the findings contribute to a deeper understanding of stretching sheet systems, such as in manufacturing processes involving continuous casting or polymer film production. The incorporation of MoS₂-C₂H₆O₂ nanofluids can potentially optimize temperature distribution and fluid dynamics.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권1호
• /
• pp.9-15
• /
• 2013

지구 온난화 현상과 유가급등에 따른 에너지 부족 현상은 생산된 에너지의 효율적인 사용과 관리 문제를 부각시켰다. 이에 열교환기의 에너지 효율 향상을 위한 새로운 방안이 요구되었고 새로운 작동유체로서 나노유체의 열전달 특성 연구가 필요한 실정이다. 나노유체의 전도열전달특성의 경우 많은 선행연구에서 예측 가능한 패턴을 보이며 증가한 반면, 대류열전달 특성의 경우 특성이 명확하지 않아 추가적인 연구가 필요한 실정이다. 본 연구에서는 $25^{\circ}C$, $50^{\circ}C$의 입구온도 조건에서 레이놀즈수와 나노유체의 vol%를 증가시키며 실험을 수행하였다. 수행 결과 레이놀즈수와 vol%, 입구 온도가 증가할수록 대류열전달계수가 향상되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.847-853
• /
• 2008

Although combustion is essential in most energy generation processes, it is one of the major causes of air pollution. Circle fin exhaust pipes were designed to study the effect of cooling the recirculated exhaust gases (EGR) of Diesel engines on the chemical composition of the exhaust gases and the reduction in the percentages of pollutant emissions. The designs adopted in this study were exhaust pipes with solid and hollow fins around them direct surface force measurement in water using a nano size colloidal probe Technique The direct force measurement between colloidal surfaces has been an essential topic in both theories and applications of surface chemistry. As particle size is decreased from micron size down to true Carbon nano Colloid size (<10nm), surface forces are increasingly important. Nanoparticles at close proximity or high solids loading are expected to show a different behavior than what can be estimated from continuum and mean field theories. This paper use Water and CNC fluid at normal cooling system of EGR. Experimental result showed all good agreement at Re=$2.54{\times}10^{4}$.

• 한국세라믹학회지
• /
• 제41권3호
• /
• pp.242-246
• /
• 2004

화염분무열분해(FSP) 공정을 이용하여 결정질의 좁은 입도분포를 가지는 $\alpha$-알루미나 나노입자를 제조하였다. 초미분의 액적을 형성시키기 위해 전구체 용액으로서 연료인 등유를 연속상으로 하고 산화제인 알루미늄 질산염 수용액을 분산상으로 하는 유중수적(W/O)형의 마이크로에멀전을 제조하였다 0.5M 농도의 알루미늄 질산염 수용액을 10vol%, 등유 80vol%, 그리고 유용성 유화제 10vol%를 혼합하여 안정한 분산상태를 가지는 마이크로에멀전을 제조한 후, 이류체 노즐 분무기를 사용하여 0.03㎫의 공기 압력으로 분무하여 화염에 직접 노출시켰다. 제조된 생성물은 20에서 30 나노미터의 균일한 크기를 가지는 $\alpha$-알루미나 상으로 확인되었다.