• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.83-87
• /
• 2010

Functional Concrete Added Titanium Dioxide(TIO2) for photocatalysis was about a result strength Reduction by recent studies. Therefore, The purpose of the study is to review the possibility of TIO2 for using concrete admixture. As a result, Nano TIO2 for concrete admixture helps increased strength of concrete and here are some of the details. The compressive strength and flexural strength of cement mortar added same amount of Nano SF and TIO2 for admixture were development of strength a certain level each other. when Nano admixture use 10%, SF and TIO2 showed development of strength 60% and 40% each other gradually. If I use over 10% Both SF and TIO2, they showed irregular strength variations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.458.2-458.2
• /
• 2014

We have demonstrated that simple brush-painted Ti-doped $In_2O_3$(TIO) films can be used as a cost effective transparent anodes for organic solar cells (OSCs). We examined the RTA effects on the electrical, optical, and structural properties of the brush painted TIO electrodes. By the direct brushing of TIO nanoparticle ink and rapid thermal annealing (RTA), we can simply obtain TIO electrodes with a low sheet resistance of 28.25 Ohm/square and a high optical transmittance of 85.48% under atmospheric ambient conditions. Furthermore, improvements in the connectivity of the TIO nano-particles in the top region during the RTA process play an important role in reducing the resistivity of the brush-painted TIO anode. In particular, the brush painted TIO films showed a much higher mobility ($33.4cm^2/V-s$) than that of previously reported solution-process transparent oxide films ($1{\sim}5cm^2/V-s$) due to the effects of the Ti dopant with higher Lewis acid strength (3.06) and the reduced contact resistance of TIO nanoparticles. The OSCs fabricated on the brush-painted TIO films exhibited cell-performance with an open circuit voltage (Voc) of 0.61 V, shot circuit current (Jsc) of $7.90mA/cm^2$, fill factor (FF) of 61%, and power conversion efficiency (PCE) of 2.94%. This indicates that brush-painted TIO film is a promising cost-effective transparent electrode for printing-based OSCs with its simple process and high performance.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1452-1457
• /
• 2011

실리카흄과 이산화티타늄을 건식 및 습식방식에 의해 나노화하여 시멘트 모르타르의 강도특성실험을 수행하였다. 실험변수는 건식 및 습식 방식으로 제조된 혼화재를 각각 5,10,15,20%의 첨가율로 하였다. 그 결과 실리카흄과 이산화티타늄을 사용했을 때의 시멘트 모르타르 강도 특성이 유사하게 나타났으며 건식과 습식 혼화재의 비교에서는 습식 혼화재를 사용했을 때가 더 큰 강도 특성을 보였다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2008년도 추계학술대회 논문집
• /
• pp.423-424
• /
• 2008

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2009년도 학술발표대회
• /
• pp.9-13
• /
• 2009

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1240_1241
• /
• 2009

In this paper, sol-gel-spin coated $Pb(ZrTi)O_3$ thin film with $ZrO_2$ buffer-layer and $PbTiO_3$ seed-layer was investigated for vibration MEMS energy harvester to scavenge power from ambient vibration via d33 piezoelectric mode. Piezoelectric thin film deposition techniques on insulating layer is the important key for $d_{33}$ mode of piezoelectric vibration energy harvester. $ZrO_2$ buff-layer was utilized as an insulating layer. $PbTIO_3$ seed-layer was applied as an inter-layer between PZT and $ZrO_2$ layer to improve the crystalline of PZT thin film. The fabricated PZT thin film had a remanent polarization of 5.3uC/$cm^2$ and the coercive field of 60kV/cm. The fabricated energy harvester using PZT thin film with PTO seed-layer generated 1.1uW of electrical power to $2.2M{\Omega}$ of load with $4.4V_{pvp}$ from vibration of 0.39g at 528Hz.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.59-64
• /
• 1998

In order to lower porosity of the porous silica, titanium alkoxide solution was filled in the pore of silica in the heating-vacuum condition. The specific surface area of modified samples was decreased effectively from 900 m$^2$/g to 100 m$^2$/g. (The aggregation phenomena in modified samples were improved fairly.) Samples were heated at 600 , and then the titanium alkoxide in the pore was decomposed completely to titanium oxide from TGA-DTA measurement. From SEM result, it was evident that titanium oxide did not coat the surface of the silica. The modified samples were analyzed using SEM, DTA-TGA, BET, and UV-visible spectrometer.

• Wind and Structures
• /
• 제26권1호
• /
• pp.1-9
• /
• 2018

This research studies the dynamic analysis of a concrete column reinforced with titanium dioxide ($TiO_2$) nanoparticles under earthquake load. The effect of nanoparticles accumulation in a region of concrete column is examined using Mori-Tanaka model. The structure is simulated mathematically based on the theory of sinusoidal shear deformation theory (SSDT). By calculating strain-displacement and stress-strain relations, the system energies include potential energy, kinetic energy, and external works are derived. Then, using the Hamilton's principle, the governing equations for the structure are extracted. Using these equations, the response of the concrete column under earthquake load is investigated using the numerical methods of differential quadrature (DQ) and Newark. The purpose of this study is to study the effects of percentage of nanoparticles, nanoparticles agglomeration, geometric parameters and boundary conditions on the dynamic response of the structure. The results indicate that by increasing the volume percent of $TiO_2$ nanoparticles, the maximum dynamic deflection of the structure decreases.

• 청정기술
• /
• 제29권2호
• /
• pp.118-125
• /
• 2023

부지가 폴리염화비페닐(polychlorinated biphenyls, PCBs)로 오염되면, 심각한 환경 및 건강 위해를 피할 수 없게 된다. 따라서 혁신적이지만 경제성을 지니는 제자리 복원 기술이 오염 부지에 즉시 적용되어야 한다. TCE, PCE 및 DDT와 같은 염소계 유기화합물의 탈염소화를 위하여 최근에는 나노 규모의 영가-철(zero-valent iron, ZVI)이 성공적으로 적용되었고, 지구 지각에서도 풍부하게 존재하는 철은 환경적으로 안전한 것으로 통상적으로 간주된다. 입상 ZVI에 비해 나노 규모 ZVI의 반응성은 훨씬 높지만, 높은 표면에너지와 자기적 물성 때문에 나노 규모 ZVI 입자들은 서로 응결된다. 서로 응결되어 큰 입자로 전환되는 것을 방지하기 위해 먼저 생성된 나노 ZVI 입자들을 가능한 고정화하기 위한 방안으로 TiO₂ 분말에 나노 ZVI를 담지하였다. FeSO₄와 TiO₂ 분말의 수용액상 슬러리에 NaBH₄를 천천히 첨가하여10wt% ZVI/TiO₂를 제조하였다. 입자 크기의 불균일성에도 불구하고, 나노 ZVI 입자들이 TiO₂ 외부 표면에 성공적으로 분산되었다. 제조된 ZVI/TiO₂는 PCBs의 표준 물질 일종인 Aroclor 1242로 인위적으로 오염시킨 토양의 PCBs 분해 실험에 적용되었고, Aroclor 1242 분해 성능을 관찰하였다. 제조된 ZVI/TiO₂는 Aroclor 1242 분해에 꽤 높은 반응성을 보였지만, 분자량이 큰 탄화수소로 판단되는 화합물이 부산물로 생성되어 토양에 잔류하는 것은 피할 수 없었다.