• 열처리공학회지
• /
• 제23권2호
• /
• pp.75-82
• /
• 2010

A new advanced combined PVD/CVD technique of DLC film deposition has been developed. Deposition of a DLC film was carried out using a pulsed carbon arc discharge in vapor hydrocarbon atmosphere. The arc plasma enhancing CVD process promotes dramatic increase in the deposition rate and decrease of compressive stress as well as improvement of film thickness uniformity compared to that obtained with a single PVD pulsed arc process. The optical spectroscopy investigation reveals great increase in radiating components of $C_2$ Swan system molecular bands due to acetylene molecules decomposition. AFM, Raman spectroscopy, XPS and nano-indentation were used to characterize DLC films. The method ensures obtaining a new superhard DLC nano-material for deposition of protective coatings onto various industrial products including those used in medicine.

• 대한금속재료학회지
• /
• 제48권10호
• /
• pp.884-892
• /
• 2010

To modify the physical properties of Cu thin films, gelatin is generally used as an additive. In this study, we assessed the effect of gelatin on the mechanical properties of electrodeposited Cu films. For this purpose, Cu/gelatin composite films were fabricated by adding 100 ppm of gelatin to an electrolyte, and tension and indentation tests were then performed. Additional tests based on pure Cu films were also performed for comparison. The Cu films containing gelatin presented a smaller grain size compared to that of pure Cu films. This increased the hardness of the Cu films, but addition of gelatin did not significantly affect the elastic modulus of the films. Cu films prepared at room temperature showed no significant change in the yield strength and tensile strength with an addition of gelatin, but we observed a dramatic decrease in the elongation. In contrast, Cu films prepared at $40^{\circ}C$ with gelatin presented a significant increase in the yield strength and tensile strength after the addition of gelatin. Elongation was not affected by adding gelatin. Presumably, the results would be closely related to the preferred orientation of the Cu thin film with the addition of gelatin and at temperatures that lead to a change in the microstructure of the Cu thin films.

• Journal of Welding and Joining
• /
• 제33권2호
• /
• pp.40-46
• /
• 2015

This study was performed to investigate the effect of ultrasonic nano crystal surface modification (UNSM) on residual stress mitigation after Weld Inlay repair for butt dissimilar metal weld with Alloy 82/182 in reactor vessel In/Outlet nozzle. As-welded and Weld Inlay specimens were made in accordance with design standard of ASME Code Case N-766, and two planes of their weld specimens were peened by the optimum UNSM process condition. Peening characteristics for weld specimens after UNSM treatment were evaluated by surface roughness and Vickers hardness test. And, residual stress for weld specimens developed from before and after UNSM treatment was measured and evaluated by instrumented indentation technique. Consequently, it was revealed that the mitigation of residual stress in weld metal after Weld Inlay repair of reactor vessel In/Outlet nozzle could be possible through UNSM treatment.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.559-564
• /
• 2006

The improvement of spatial resolution is a fundamental issue in the two-photon, polymerization-based, laser writing. In this study, a voxel tuning method using a radical quencher was proposed to increase the resolution, and the quenching effect according to the amount of radical quencher was experimentally investigated. Employing the proposed method, the lateral resolution of the line patterns was improved almost to 100 nm. However, a shortcoming of the quenching effect was the low mechanical strength of polymerized structures due to their short chain lengths. Nano-indentation tests were conducted to evaluate quantitatively the relationship between mechanical strength and the mixture ratio of the radical quencher into the resins. The elastic modulus was dramatically reduced from an average value of 3.015 to 2.078 GPa when 5 wt% of radical quencher was mixed into the resin. Three-dimensional woodpile structures were fabricated to compare the strength between the resin containing radical quencher and the original resin.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.273-276
• /
• 2008

Thermoplastic resin takes place stress relaxation and creep according to temperature and time. In room temperature, time dependent deformation (TDD) of polymer was carried out at previous study. In this study, it evaluates time dependent deformation to relate temperature. Nanoscale indents can be used as cells for molecular electronics and drug delivery, slots for integration into nanodevices, and defects for tailoring the structure and properties. Therefore, it is important to control pattern depth for change of indent depth by creep when using Nanoindenter. For evaluating TDD at high temperature, it is occurred thermal-nanoindentation test by changing hold time at maximum load. Temperature is putted at $90^{\circ}C$, hold time at maximum loads are putted at 1, 10, 50, 100, 200, 300 and 500s.

• 마이크로전자및패키징학회지
• /
• 제27권3호
• /
• pp.83-88
• /
• 2020

최근 스마트폰 산업의 발전으로 인하여 실사용 환경에서 유연소자의 기계적 거동에 대한 연구가 많이 이루어지고 있다. 유연소자 박막은 두께가 나노 단위이고, 기존의 시험법으로 측정하기 어려워 주로 나노압입시험을 이용하여 경도, 탄성계수 등의 특성을 구하고 있다. 그러나 현재 널리 쓰이고 있는 분석법(Oliver-Pharr Method)은 기판의 영향이 이론적으로 고려되지 않아 단순히 적용하기에는 무리가 있다. 따라서 본 연구에서는 기판 영향을 고려한 타 연구자들의 모델에 대한 적용성을 확인하고, 압입자와 시편 표면에서 발생하는 소성쌓임 현상(pile-up)에 대해 압입깊이의 보정을 실시하였다. 유연소자 박막의 탄성계수를 평가하고 검증하기 위하여 폴리이미드 및 실리콘 웨이퍼 기판 위에 금속, 비정질 박막을 증착하여 실제 실험을 수행하여 비교하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.177-179
• /
• 2011

The purpose of this study is to enhance an adhesion between substrate and Diamond-like Carbon (DLC) film. DLC has many outstanding properties such as low friction, high wear resistance and corrosion resistance. However, it is difficult to achieve enough adhesion because of weak bonding between DLC film and the substrate. For improvement adhesion, a layer between DLC film and the substrate was prepared by dual post plasma. DLC film was deposited on nitrided layer by linear ion source. The composed compound layer between substrate and DLC film was investigated by Glow Discharge Spectrometer (GDS) and Scanning Electron Microscope (SEM). The synthesized bonding structure of DLC film was analyzed using a micro raman spectrometer. Mechanical properties were measured by nano-indentation. In order to clarify the mechanism for improvement in adhesive strength, it was observed by scratch test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.389-392
• /
• 2005

In the modern days, a galvannealed sheet steel(GA) instead of a cold rolled steel sheet has been widely used as an alternative to extend the life of automotive body. Accordingly, the mechanical properties of GA for automobiles were taken Into account and studied by comparing with the temperature variation on annealing in this study. To clarify the effect of surface features in the mechanical properties of GA, the several tests such as nanoindentation and FE-analysis were executed. For this goal use is made of the method of neural networks. The developed neural networks apply also to obtain reliable mechanical properties of the thin films. Load-displacement curve was computed by the analysis procedure and compared with experimental results.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.410-416
• /
• 2015

Recently, a new $Y_2O_3$ coating deposited using the EB-PVD method has been developed for erosion resistant applications in fluorocarbon plasma environments. In this study, surface crack formation in the $Y_2O_3$ coating has been analyzed in terms of residual stress and elastic modulus. The coating, deposited on silicon substrate at temperatures higher than $600^{\circ}C$, showed itself to be sound, without surface cracks. When the residual stress of the coating was measured using the Stoney formula, it was found to be considerably lower than the value calculated using the elastic modulus and thermal expansion coefficient of bulk $Y_2O_3$. In addition, amorphous $SiO_2$ and crystalline $Al_2O_3$ coatings were similarly prepared and their residual stresses were compared to the calculated values. From nano-indentation measurement, the elastic modulus of the $Y_2O_3$ coating in the direction parallel to the coating surface was found to be lower than that in the normal direction. The lower modulus in the parallel direction was confirmed independently using the load-deflection curves of a micro-cantilever made of $Y_2O_3$ coating and from the average residual stress-temperature curve of the coated sample. The elastic modulus in these experiments was around 33 ~ 35 GPa, which is much lower than that of a sintered bulk sample. Thus, this low elastic modulus, which may come from the columnar feather-like structure of the coating, contributed to decreasing the average residual tensile stress. Finally, in terms of toughness and thermal cycling stability, the implications of the lowered elastic modulus are discussed.

• 한국진공학회지
• /
• 제18권5호
• /
• pp.346-351
• /
• 2009

선폭의 감소와 소자 집적도의 증가로 인하여 향후 현재 사용되고 있는 탑-다운(Top-down) 생산방식에서 바텀-업(Bottomup) 방식의 소자 생산이 예상되고 있으며, 이와 관련된 연구가 활발히 진행 중에 있다. 대표적으로 나노와이어(Nanowire)와 나노벨트(Nanobelt)를 이용한 소자 개발이 한 대안이며, 이러한 소자 개발을 위해 물질의 물성 특성 연구를 위하여 나노인덴터를 이용한 물성 연구가 진행 중이다. 특히 나노인덴터는 나노 크기의 구조물에 대한 연구를 위하여 부가적으로 원자힘현미경(AFM; atomic force microscope) 기능을 제공하며, 이를 통하여 얻어진 표면 이미지를 이용하여 나노 구조물의 정확한 위치에 대한 물성 정보를 제공하게 된다. 그러나 나노인덴터에서 사용되는 팁(tip)은 기존의 원자현미경에서 사용되는 팁에 비하여 상대적 크기가 상당히 큰 특징이 있어 나노인덴터에 의한 표면 이미지에는 상당한 오차가 발생하게 된다. 따라서 본 연구에서는 나노인덴터에서 대표적으로 사용되는 50nm 벌코비치 팁(Berkovich tip)과 1um $90^{\circ}$ 원뿔형 팁(Conical tip)을 이용하였으며, 각 팁에 대한 표면 특성을 확인하기 위하여 박막 표면을 각 팁으로 압입하여 압입 후 표면 영상과 압입 깊이를 통하여 팁의 특성을 확인하였다. 이후 나노인덴터를 이용하여 100nm급 나노 구조물에서 표면 주사를 실시하여 획득된 이미지와 기존 원자현미경을 이용한 표면 이미지를 비교하여 오차를 획득하였다. 또한 각 팁의 외형으로 이론적으로 계산된 오차와 비교하였다.